DogWatch Performance Series User manual

PERFORMANCE SERIES
OWNER’SGUIDE
HIDDEN FENCES

It’s all about your dog.™You’ve purchased the most technologically advanced
hidden fence available, thanks to our patented afeLink®FM digital technology,
AutoMemory™, FastReact™and other pet-friendly™features.
Our extensive research and testing has resulted
in a product that will add value to your lifestyle —
you can enjoy your pet and know he’s safe.
We’re also pleased to provide you with a solution that’s cost-effective and has no
impact on the aesthetics of your property.
DogWatch®offers you great flexibility. Not only can you contain your dog in your
yard, you can also keep him out of your garden or swimming pool. DogWatch can
also be attached to an existing fence to keep your pet from jumping over or digging
under it.
We also have indoor systems that work throughout your home. Keep your dog off
couches and countertops, out of doorways and rooms — you name it. Ask your
DogWatch Dealer for a solution to your indoor needs.
To assure that your DogWatch Hidden Fence works properly, please follow the
training procedures outlined in this manual or provided by your DogWatch Dealer.
Any shortcuts may affect how your dog responds to the system and could be
unsafe to your pet.
If you have any questions, please contact your local authorized DogWatch Dealer.
Thank You for Purchasing a
Dog atch®Hidden Fence System!
®
Surrounding Pets ith Freedom Since 1990.™
The DogWatch Hidden Fence
is rated a ‘Best Buy’ by
Consu ers Digest magazine.

Important Saf guards ...............................................................................................2
PT4 Transmitt r F atur s ..........................................................................................3
R7 and R9 R c iv r Collar F atur s ........................................................................5
Batt ri s
R7 and R9 Receiver Battery Insertion Instructions ......................................................7
Replacement Batteries and Battery Plans ....................................................................7
Resetting The Battery Reminder Feature......................................................................7
Us r Programmabl F atur s ..................................................................................8
R c iv r and Transmitt r S ttings............................................................................9
How th DogWatch Hidd n F nc Works ..............................................................10
How the DogWatch Hidden Fence is Installed............................................................11
Important R mind rs ..............................................................................................12
P t-Fri ndly™Containm nt Training
Your Dog’s Response To Stimulation..........................................................................13
Dog Personalities & Traits ..........................................................................................13
Creating the Right Environment..................................................................................13
Safety and Avoidance Zones......................................................................................14
Adjusting the Receiver Collar ....................................................................................14
Containment Training Reminders ..............................................................................15
Phas 1: Audible Training.......................................................................................... 15
Phas 2: Introduction to Correction .......................................................................... 16
Phas 3: Introduction to Distractions ........................................................................17
Phas 4: Introduction to Increased Distractions ........................................................17
Phas 5: Letting Your Dog Off The Leash ..................................................................18
Phas 6: Taking your Dog Outside The Boundary......................................................18
Training Tips ..............................................................................................................19
Warranti s
Warranty Registration ................................................................................................20
Manufacturer’s Warranty ............................................................................................20
Syst m Maint nanc R cord ..................................................................................21
1
Table Of Contents

■Please read all the literature included with your DogWatch®Hidden Fence before
turning the system on or beginning training.
■Do not attempt to shortcut the complete training of your dog.
■The DogWatch Hidden Fence is intended only for the purpose of containing
domestic dogs and cats. Use for any other purpose is at the system owner’s risk.
■In the event your system requires servicing, please contact your local authorized
DogWatch Dealer. Attempting to service the system yourself may invalidate the
warranty.
■The DogWatch Hidden Fence is recommended for dogs six (6) months or older.
Your Dealer will recommend if a puppy under 6 months old is ready.
■Keep the collar and the transmitter out of the reach of children.
■Never adjust the transmitter or receiver when your dog is wearing the collar.
■DogWatch recommends that you unplug your transmitter from the wall outlet and
disconnect the loop wire during lightning storms or when it is left unused for
extended periods. This will prevent possible damage from lightning and powerline
surges.
■This product is only intended for use with trained domestic dogs. If your dog is
aggressive or violent and could cause harm to itself or others outside the fenced
premises, you should take other measures to restrain your dog such as traditional
fencing.
2
Important Safeguards
DOG ATCH STRONGLY RECOMMENDS THAT YOU REMOVE THE COLLAR
AT NIGHT HILE YOUR DOG IS INSIDE
To contact your local dealer, please call Dog atch at 800-793-3436
or go to our website at www.dogwatch.com.

Never adjust the transmitter while your dog is wearing the receiver collar.
1. Pow r On/Off: This switch gives you easy access to turn the transmitter on or off.
The red Power light on the front panel lets you know that it is operating.
2. Pow r Supply: The transmitter is powered by the power supply/adapter provided
with the transmitter. The power supply is plugged into a properly grounded 110 volt
outlet and the adapter is plugged into the “PWR” jack on the bottom of transmitter.
3. Pow rPak™:The optional PowerPak battery back-up keeps the transmitter
operating in the event of a power failure. When the transmitter is being powered by
the battery back-up, the red power light will remain off. The PowerPak plugs into the
transmitter at “P-PAK”.
4. Ground Wir : The green ground wire connects to the transmitter at the location
labeled “GND.” The round connector on the green ground wire is attached under
the screw on the outlet faceplate. It will, however, only be effective if your outlet is
properly grounded. If you have any questions about having a properly grounded
outlet, consult your local electrician.
5. Boundary Loop Plug: Your system includes a zip cord with a plug on one end. This
plug fits into the hole marked “Loop” on the bottom of the transmitter. This is the
beginning of the boundary wire that is buried in your yard. After the boundary wire
has been properly installed and plugged into the transmitter, the Range and
Boundary Loop Monitor light will turn on.
PT4 Transmitter Features
8
7
5
3
1
9
2
Training
Mod Switch
Rang
Control
Pow r
On/Off
Pow r Supply Pow rPak™ Ground Wir Boundary Loop Plug
4
6
3
The transmitter sends a coded digital FM radio signal through the boundary wire. This
signal can be adjusted, allowing you to control the “hidden fence” around your property.
Rat
Adjustm nt
Bottom View
Rang & Boundary
Loop Monitor
Display

4
6. Rang and Boundary Loop Monitor Display: The Range and Boundary Loop
Monitor Display(LMD) provides a visual indication of the status of your boundary
wire and signal range. On traditional boundary wire configurations, each number
on the scale represents the signal range in feet. Rang = distanc th signal is
b ing broadcast from ach sid of th wir . A significant change (drop) in signal
range could indicate a partial wire break or other boundary wire problem. If th
boundary loop wir is brok n or th signal is int rrupt d, th light will go out
and an audibl warning will sound. You should check around your property for a
visible wire break. Contact your dealer for troubleshooting tips or to schedule an
appointment.
Not : For non-traditional wire configurations where the boundary wires may be
close to one another, the LMD may not measure the boundary signal accurately in
feet, but is a visual setting reference point. Your DogWatch dealer will explain the
LMD setting and your actual signal range.
7. Rang : The radio signal is transmitted from the boundary wire in all directions. The
signal range (the distance the signal broadcasts from the wire) is adjusted by the
Range Control on the transmitter. The recommended signal range (on each side of
the wire) is 6-10 feet. Your DogWatch Dealer will adjust the range according to the
personality and traits of your dog. Consult your DogWatch Dealer before making
any adjustments yourself.
Signal Fi ld: The signal field (the area in which the dog’s receiver collar detects the
signal) has two areas. The outer-most part of the signal field (~13% of the signal
field) triggers an audibl warning. If your pet continues further into the signal field,
he will receive a corr ction. To prevent your dog from entering the signal field and
remaining in the audible area (causing depletion of the battery), the receiver
transitions from an audible warning to a short warning correction after a period of
15 seconds. This will not activate if the receiver is set to the “Audible Only” Training
Level (Level “0” - see Setting the Receiver: page 8.)
8. Training Mod : The Training Mode Switch allows you to choose between two pet
friendly training options Basic (Mode A) and QuickAl rtTM (Mode B). In the Basic
setting, your pet receives the normal audible warning followed by a correction if he
continues into the signal field. When set to QuickAlert (used primarily for harder to
train dogs), your pet receives a very quick “alert” correction followed by the normal
audible warning and correction.
NOTE If you have multiple dogs on the system, the Training Mode setting effects
all receivers. They are ALL set to the same mode, Basic or QuickAlertTM.
9. Rat : The Rate can be adjusted to three levels (1 = slow, 2 = medium, 3 = fast).
When your dog gets a correction, he receives it in a series of pulses. Increasing the
Rate delivers a greater number of pulses per second. The adjustable Rate feature
operates only when the Receiver Training Level is set to Level 1, 2, or 3.
See the Receiver Levels a d Tra smitter Setti gs chart o page 9.
Not : On the back of the transmitter are four very small switches. These
switches set your transmitter to the correct broadcast frequency. Your dealer
will set these switches for your system.
Do NOT chang th s s ttings. Th y ar for DEALER USE ONLY.

Adjustabl Collar: Your receiver comes fitted to an adjustable nylon collar. The
collar should be positioned above the dog’s regular collar. The collar should be
adjusted to insure that the contact posts touch the skin on the dog’s neck. Check the
fit for the first few days of wear to insure that the collar is not too tight or causing
irritation to your pet’s neck. To help prevent irritation of the skin, we reco end
re oving the collar at night while your pet is inside.
Saf Link®Digital FM D sign: Our patented FM design allows the DogWatch
receiver to recognize and activate only to our unique radio signal. This protects your
pet from unintentional correction caused by stray radio signals which may be emitted
by other electronic devices.
AutoM mory™:Our patented AutoMemory feature automatically adjusts the
correction level of the receiver when your pet challenges the boundary. When the
receiver is set to one of the AutoMemory levels, and the dog enters the signal field,
the dog will receive the correction of the initial setting. If your dog leaves the signal
field, the receiver will automatically advance the correction level setting by one, and
only one level. If the dog does not re-enter the signal field within the next 24-hour
period, the receiver defaults to the original setting. The AutoMemory feature operates
when your Receiver Training Level is set to 4, 5, or 6.
FastReact™ Tim : Whether your dog, strolls, runs or sprints into the Avoidance
Zone, the receiver will react — and correct — within 1/8 of a second (.125).
Automatic Shutdown: The DogWatch system is designed to protect your dog from
an over-correction in the unlikely event that your dog gets caught in the signal field. If
your dog does not exit the signal field, the receiver will automatically stop correcting
after 15 seconds — protecting your dog from over-correction. The receiver will
automatically reset once the dog leaves the signal field.
Collar Bon : The Collar Bone, metal lock washers and contact posts fasten the
receiver to the nylon collar. (A CollarBone is not used with the GentleFit™posts.)
R7 and R9 Receiver Features
Magnet
Battery Cap Tool
Contact Post Wrench
Test Light
Adjustabl
Collar Contact
Posts
M tal Lock Wash r
Collar Bon
Training L v l Adjustm nt Location
Status Light
3.6 Volt Batt ry (R9)
Batt ry Cap
The lightweight radio receiver worn by the dog identifies the coded FM radio signal from
the boundary wire. It creates an audible warning followed by stimulation if he comes too
close to the boundary wire. It operates on a replaceable battery and is
waterproof when the battery cap is securely fastened.
GentleFit™Contact Posts
(optional)

Contact Posts: The receiver comes with a set of stainless steel contact posts
(stainless steel or composite with stainless steel tips.) Conductive plastic ‘GentleFit’™
contact posts may be purchased separately if preferred or if recommended by your
Dealer.
Your DogWatch Dealer will determine the correct set based on your dog’s coat, neck
shape, and skin sensitivity. The posts must make contact with the skin in order for the
dog to feel the correction. In certain cases, your dealer may recommend clipping some
of the hair around the contact posts so that they can touch the skin more easily. Use
care if you find it necessary to tighten the contact posts with the collar wrench, as over-
tightening could cause damage to the receiver.
Ant nna: The receiver’s omni-directional antenna design assures optimal reception
from the signal field.
T st Light: The test light allows you to test the receiver. Hold the test light over the
contact posts and carry the receiver into the signal field a few
feet from the ground. When the receiver picks up the signal
from the boundary wire, the audible or vibation warning will
activate and the test light will come on.
Status Light The light continuously monitors your receiver and
provides these features.
■Start-Up When you first insert the battery, the status light
will flash r d and gr n. This indicates that the receiver has
started properly. Once started, the status light will continue to
flash gr n once every 40 seconds indicating normal op ration.
In the event that the light does not flash, check the battery to be
sure that it has been inserted properly.
■Training L v l Indicator When programming the
training level of your receiver (see page 8), the status light
will flash gr n in conjunction with audible beeps. The
number of flashes/beeps will equal the training level you
have chosen.
■Signal Fi ld Indicator When testing the receiver in the
signal field, the status light will flash gr n when the
receiver is in the audible zone and will flash r d and
gr n when the receiver is in the correction zone.
■Corr ction Al rt You will be able to tell if your pet has
tested the boundary by looking at the status light. The
status light will doubl flash gr n every 40 seconds
during the 24-hour period after the dog has entered the
boundary area.
■Batt ry Indicator This feature monitors the voltage
level of the battery. Once the receiver detects that the
battery has reached a low voltage level, the status light
will change from blinking gr n every 40 seconds to
blinking r d every 10 seconds. This indicates that your
battery is close to the end of its useful life and you should
change the battery within the next 3-4 days.
See page 7 for how to cha ge your battery a d reset your receiver.
6
Usi g the Test Light
The R7Status Light
The R9 Status Light

Battery Insertion Instructions
R7 Batt ry: The R7 receiver is powered by a 3 volt (1/3 N) lithium battery. The
receiver is designed for a battery life of up to 6 months. The n gativ (-) end of the
battery must be inserted down.
R9 Batt ry: The R9 battery is powered by a 3.6 volt lithium battery. The receiver is
designed for a battery life of up to two years. The positiv (+) end of the battery
must be inserted down.
Battery Plans
Ask your DogWatch Dealer about a battery plan. If your DogWatch Dealer does not
offer a battery plan, you can join the DogWatch Battery Program, where a new
battery is mailed to you every 6 or 24 months, depending on the type of receiver
you own. Call DogWatch at 800-793-3436 or join through the website at
www.dogwatch.com.
Resetting the Low Battery Light
1. Remove the old battery.
2. Before inserting a new battery, l t th r c iv r sit for fiv minut s with no
battery.
3. After five minutes, insert the new battery.
If you forget to wait prior to inserting a new battery, the “low battery” light will
continue to blink red until it auto atically resets itself after 24 hours.
I sert R9 battery POSITIVE e d dow .
I sert R7 battery NEGATIVE e d dow .
7
Batteries
IMPORTANT: The use of any battery other than a battery authorized by Dog atch Inc. can
cause erratic operation of the Receiver or could cause permanent damage. The use of any
unauthorized battery will void the warranty on the receiver.

8
SETTING THE TRANSMITTER
Rat s The Transmitter Rate switch adjusts to three settings (1 = slow, 2 = medium,
3 = fast). When your dog gets a correction, he receives it in a series of pulses per
second. Increasing the rate means that he will receive a greater number of pulses per
second. Rate 1 is the slowest pulse rate per second; 3 is the fastest.
Training Mod s The Training Mode switch allows you to choose between two
training options Basic (Mode A) and QuickAlertTM (Mode B). When in the Basic setting
your pet will receive an audible warning followed by a correction. For harder to train
dogs, when set to the QuickAlert mode, your pet will receive a very quick “alert”
correction followed by the normal audible warning and correction.
SETTING THE RECEIVER
R c iv r Training L v ls Your receiver provides eight ‘training levels’ that allow you
to customize the receiver setting to your dog’s individual needs Audible Only, Level 1
(extra low), Level 2 (low), Level 3 (low medium), Level 4 (medium), Level 5 (medium
high), Level 6 (high), and Level 7 (extra high). When the receiver is first shipped from
the manufacturer, it will automatically be set to Training Level 2 (low).
Changing th R c iv r S ttings Your Dogwatch Dealer will start the training on the
appropriate level according to your dog’s personality and traits. If you need to change
the training level on the receiver, hold the magnet on your ‘multi-tool’ to the training
level adjustment location on the side of the receiver (see below). Hold the magnet
steady and you will hear a series of beeps that indicate the current training level. The
“Audible Only” level is one long beep, Level 1 is one short beep, Level 2 is two short
beeps, Level 3 is three short beeps, etc. The training level will continue to advance
while the magnet is held in position. When you reach the desired setting, pull the
magnet away from the receiver. The receiver is now set.
Note: Any ti e the agnet activates the receiver, the nu ber of beeps will indicate
the current training level. As long as the agnet is held in place, it will advance the
receiver to the next training level and continue to cycle through the settings in the
order shown in the chart on Page 9.
Programmable Features
You can customize the receiver to one of 20 training settings, as outlined in the chart on
the right.
Usi g the mag et to set the
trai i g level o the R7 Receiver
Usi g the mag et to set the
trai i g level o the R9 Receiver

Handy Programming Tips
R comm nd d S ttings: The majority of dogs respond well to transmitter Rate
Setting 2 or 3 and a receiver Training Level 3, 4 or 5. Sensitive or small dogs that train
easily respond best to lower rate settings and lower training levels. If your dog is not
responding to training, your DogWatch Dealer will adjust your system to a higher
training level.
If Your Dog Is Hard To Train: Training Levels 5, 6 and 7 are specifically designed to
meet the needs of hard to train or stubborn dogs. These settings will provide the extra
correction that some dogs need as part of their training.
Multipl Dogs: Our receivers allow you to select individual settings for each dog.
This means that one collar can be set to Audible Only* during training while another
dog is still protected with the correction feature enabled. It is recommended that the
Audible Only* setting be used only during supervised training sessions.
9
Receiver Levels and Transmitter Settings
*** IMPORTANT ***
Never change the Receiver Training Levels when your dog is wearing the collar.
TR A N S M I T T E R M O D E A N D R A T E S E T T I N G S
Mode A Mode A Mode A Mode B
Rate 1 Rate 2 Rate 3 QuickAlertTM
Transmitter Rate Fixed at Medium
Slow Medium Fast Slow
Slow Medium Fast Medium
Slow Medium Fast Fast
Fast Fast
X-Fast X-Fast
XX-Fast XX-Fast
Audible* and XXX Fast Correction are Simultaneous
AutoM moryTM
self activates
and advances
to the next level.
RECEIVER
TRAINING
LEVELS
Audible Only*
(extra low) 1
(low) 2
(low medium) 3
(medium) 4
(medium high)
(high) 6
(extra high) 7
}
For example: If the receiver is on Level 1 and the transmitter is on Rate 1, your dog will receive the
lowest level of correction and the least number of pulses per second.
Please remember that if your Receiver Level is set to 1, 2, or 3 and you switch the Training Mode to
QuickAlert (Mode B), your training setting may change. For example, if the receiver is set to Level 3 and
the transmitter is set to Rate 1, your dog will receive a slow correction. If you switch your Training Mode
to QuickAlert, your dog will now receive a fast correction.
*There is not an audible tone in receivers equipped with a vibration feature.
The vibration feature replaces the audible tone; the receiver vibrates instead
of making a sound. The vibration feature works well for hard-of-hearing dogs
and other dogs who may be sensitive to the audible tone.

Boundary Wir : The boundary wire carries the coded FM radio signal around the
perimeter of your property. It is rated for underground burial.
Signal Field The radio signal is transmitted from the boundary wire in all directions. It
can be used to keep dogs in or out of an area. The signal is adjusted by the Rang
Control on the Transmitter to create a signal field on each side of the wire. Your Dealer
has installed the wire to the recommended width of 8-10 feet and has carefully
configured the corners to avoid sharp angles.
Continuous Loop: In order for the system to work properly, the boundary wire must
form a continuous loop. Any break in the wire will cancel the signal field. If the
boundary wire is broken or unplugged, the green Rang & Boundary Loop Monitor
Display (LMD) light will go out and an audible warning will sound. Most breaks are
caused by lawn/garden equipment. If you cannot visibly locate the break, contact your
Authorized Dealer for service.
Surg Prot ctor: For axi u protection against power surges, DogWatch offers
both internal an external surge protection. It is i portant that the surge protector be
properly grounded. This part of the system protects the transmitter from damage due
to lightning power surges. Your Dealer has attached it to the existing electrical source
house ground or a grounding rod and then connected it to the twisted wire between
the transmitter and the boundary wire.
Aft r a lightning storm, ch ck to b sur your transmitt r is working prop rly.
Do not l t your dog outsid until you know th syst m is op rating.
10
Twist d Wir Transmitt r
& Surg
Prot ctor
Boundary Wir
Signal Fi ld
Gard n Loop
How the Dog atch Hidden Fence orks
The boundary wire creates the perimeter for the DogWatch Hidden Fence ystem, and can
enclose any area up to 200 acres. It is buried at least 3 – 4” beneath the surface of the yard
or can lie on top of the ground (e.g.: in wooded or rocky areas). It can also be installed
around gardens or swimming pools, or attached to an existing fence to prevent your dog
from digging under or jumping over it.

How The Dog atch Hidden Fence is Installed
Transmitt r
Insid Wall
Zip Cord
Pow r
Supply
Outsid Wall
Surg
Prot ctor
Ground Wir
Ground
Rod
Twist d Wir
Boundary Wir
Ground Wir
Pow rPak
(optional)
11
Dog atch Performance Series System Components
•PT4 Transmitter
•Receiver (choice of R9 or R7)
•Adjustable Collar Strap
•Contact Posts (2)
•Lock Washers (2)
•Collar Bone
•Multi-Tool
•Battery
•Surge Protector
•Training Leash
•Power Supply (for Transmitter)
•PowerPakTM (optional)
•Magnet
•Test Light
•Contact Post Wrench
•Battery Cap Tool
HI D DEN F E NCE S
PO WE R
10
8
6
4
2
RAN GE
POWER PAK

12
■Keep the transmitter and receiver collar out of reach of children.
■Never attempt to service the receiver or transmitter yourself.
■Be sure your transmitter and surge protector are properly grounded.
■Fit the collar snugly around your dog’s neck.
■Make sure that battery is fresh and is inserted correctly.
■Train your dog as outlined in this manual.
■Never adjust the transmitter or receiver while your dog is wearing the receiver collar.
Troubleshooting
If your dog is not staying within the boundary created by the DogWatch®Hidden Fence
ystem, check the following:
■Did you and your dog complete the Dealer recommended training program?
■Is the battery in the receiver collar depleted?
■Is the battery installed properly? .
■Is the receiver collar too loose?
■Is the receiver operating properly?
■Is the transmitter on and adjusted properly?
■Is the signal field too narrow?
■Is the Rate level too low?
■Is the Training Mode switch in the proper position?
■Is the boundary wire unplugged?
■Is the boundary wire broken?
Other troubleshooting tips are available on line at www.dogwatch.com. If you are
unable to determine the cause of the problem, please contact your Authorized Dealer.
Important Reminders

Your Dog’s R spons To Stimulation
Stimulation has been a safe and effective part of dog training for more than 30 years.
All dogs respond differently when they feel a mild stimulation. Some dogs may
demonstrate little, if any, reaction, while others may yelp or jump back. Some dogs
“freeze”. Do not try to comfort the dog if he receives correction or it will reinforce his
anxiety.
Dog P rsonaliti s and Traits
Keep in mind that a dog’s personality and traits differ among breeds. Dogs may not
exhibit the same personalities and traits within the same breed.
Your DogWatch dealer will ask you questions about your dog before training begins.
A shy or senior dog may require longer Phase 1 sessions, while a gregarious or
easy to distract dog may require a short Phase 1, but longer Phase 2 or 3 sessions.
The better you know your dog, the easier the training will be for both of you!
Cr ating Th Right Environm nt
Attitude and Consistency is I portant!
1. Keep the training “light”. Use lots of praise. Keep the dog’s spirits high.
2. Use high happy tones for praise. Use low tones for negative commands.
3. Move around the boundary in the same direction.
4. Reinforce the boundary with commands. Use the commands “Watch Out!” or
“Careful” as you slap or shake the flags.
5. Limit the training session to no more than 20 minutes.Keep training consistent.
6. Keep your dog on the lead in the yard for five days.
7. If you are training more than one dog, train each dog separately.
8. Use naturally occurring distractions such as a neighbor or children.
9. Contact your DogWatch Dealer if you have any questions.
R m mb r!
Proper training is essential for successful containment. If you have any questions
about the training phases, especially during the first few weeks, or if you have
questions about your dog’s behavior during his training sessions, please contact your
DogWatch dealer.
13
Pet-Friendly™Containment Training
This section provides general guidelines for training your dog to remain within the
designated boundary of your property. Your DogWatch Dealer will customize the
training for your dog and teach you the appropriate training approach.
Your DogWatch Dealer will install your DogWatch Hidden
Fence System, set the system to the appropriate training
levels for your dog’s personality, and place boundary flags
around the perimeter of your yard. After installing the system,
your Dealer will prepare you and your dog for the training process.

14
Saf ty and Avoidanc Zon s
1. SAFETY ZONE: This is the area where the dog is free to play.
2. AVOIDANCE ZONE: The Avoidance Zone is the area b tw n the flags and the
boundary wire where there is a signal created by the wire. When your dog crosses into the
signal field, the receiver collar emits an audibl warning (or a vibration warning if it is a
vibration r c iv r.) If your dog continues to move toward the boundary wire after hearing
the warning beeps, he will receive a correction.
Training teaches your dog to stay in the Safe Zone.
Adjusting th R c iv r Collar
Your DogWatch Dealer has installed your DogWatch Hidden Fence System, set the
transmitter and receiver to the training levels appropriate for your dog’s personality
and traits, and has placed boundary flags around the perimeter of your yard. Your
Dealer has already begun your dog’s first day of containment training. Now it is your
turn to continue the training.
Be sure to place the DogWatch receiver collar on your dog’s neck before you go
outside to begin training.
1. The collar should be worn snugly on the dog’s neck. This is xtr m ly important!
2. Place no more than one thumb width between the contact post and dog’s neck.
3. When checking snugness of collar, the dog’s
neck should be facing down (sniffing position)
as this is where the dog’s neck is the smallest.
4. If the collar is too tight, the receiver unit will
stick out to the side when the dog shakes his
head.
5. If the collar is too loose, the dog will not receive
the intended correction when he or she
wanders into the Avoidance Zone.
6. Remember to periodically check for irritation
around the dog’s neck.
7. DogWatch strongly recommends that the
collar be removed daily and when the dog is
inside the house.
Checki g the collar
Boundary Wir Avoidanc Zon
Saf ty Zon

Containm nt Training R mind rs
Purpose: To teach your dog where the boundary
is and how to react to it.
1. Only a portion of the yard, the Avoidance Zone,
is to be avoided.
2. Playtime is very important! Remember to
reinforce the Safety Zone and play with your
dog before, during, and after each training
session.
3. Never throw a ball or toy into the Avoidance
Zone during training.
4. Your DogWatch Dealer will determine the most
appropriate training approach for your dog. It
is important to work with your Dealer to make
sure you understand the training plan.
The remainder of this section describes general
training Phases.Your Dealer may modify the
approach described in this manual in order to
meet the specific training needs of your dog.
There are many successful training appoaches
that may be used.
If you have questions about containment training, please contact your DogWatch
Dealer for assistance.
PHASE 1 (1-2 days)
Audible “Beep” Training (or Vibration)
During this phase, the Training Level on the receiver is set to “Audible Only”. On this
setting, your dog will hear only the audible “beep” tone (or feel the vibration) and will
not receive a correction if he enters the Avoidance Zone.
1. Put the receiver collar on your dog 20 minutes before training. Your dog’s regular
collar should be positioned below the DogWatch collar.
2. Clip the green DogWatch training lead on his regular collar.
3. Take your dog outside and play with him in the Safety Zone for a few minutes.
4. Walk your dog around the perimeter of your yard, keeping inside the Safety Zone
and away (about 3 to 4 feet) from the training flags.
5. When you finish the walk, approach a training flag. Hold the dog by the leash in
one hand and slap or shake a flag with the other, warning the dog firmly (in a low
stern voice) “Watch out! or “Careful!” You can also use a friend or family member
to sit in the Avoidance Zone to slap or wave the flag as you approach it.
6. Give a leash correction (a firm tug), and quickly retreat into the Safety Zone. This
creates a sense of urgency to the retreat. It is not a casual turn. Remember to use
of lot of “Good dog!” praise after you’ve retreated into the Safety Zone.
7. Now walk your dog around the property allowing him to enter the Avoidance Zone
between the two flags.
Contact
Posts
must
touch
skin
Adjust
collar
strap
1
1
Play time while trai i g is importa t

16
8. When your dog enters the Avoidance Zone,
he will receive an audible “beep” (or vibration)
warning. Immediately yell, “Watch out!” and
quickly tug on the leash and direct him back
into the Safety Zone and praise.
9. Repeat several times in different locations
(where flags are visible) and watch for
hesitation as you approach the flags. Your
dog may turn or shake his head when he
hears the beep (or feels the vibration).
Remember Playtime is very important!
Praise and play with your dog in the Safety Zone
for a few minutes. Take your dog inside and
remove the DogWatch receiver collar after about
20 minutes. Train your dog in this manner for a
least two days before moving on to Phase 2.
PHASE 2 (2-5 days)
Introduction to Correction
1. Put the DogWatch receiver collar on your
dog at least 20 minutes before going outside
to train.
2. Clip on the green DogWatch training lead
and take your dog outside and play a few
minutes in the Safety Zone.
3. Walk around the complete perimeter, remaining inside the Safety Zone. Pause a
few times along the way to slap a flag and yell, “Watch out!” or “Careful!”
4. Your dealer has set the receiver to the training level appropriate for your dog and
has helped you introduce your dog to correction. Phase Two will help reinforce
your dog’s new boundary and the consequences if he crosses the training flags.
Select a new location to teach your dog today. Allow your dog to walk into the
Avoidance Zone while saying the negative command. When your dog retreats out
of the Avoidance Zone after he hears the warning “beep”, praise him for a few
minutes in the Safety Zone. Select another location and repeat the exercise.
If your dog does not react to the correction, first check to be sure the contact posts
are touching the dog’s skin. If your dog still does not respond to the correction, con
tact your dealer.
Re e ber: Keep the training sessions to no longer than 20 inutes, once or twice a day.
5. After training, praise your dog and play with him in the Safety Zone for a few
minutes, bring your dog into the house and remove the DogWatch collar after
about 20 minutes.
Not : It is important not to remove the receiver collar immediately following the
training as you do not want your dog to associate the receiver collar with the
correction.
GIve a quick tug a d a war i g at the flags
Give a verbal war i g at the flags
Careful! Watch out!
2
NOTE In the remainder of the Training section, if you have a receiver equipped with
the VIBRATION feature hear the audible “beep” = feel the vibration.

PHASE 3 (2-5 days)
Introduction to Distractions
1. Put the receiver collar on your dog at least 20 minutes before going outside.
2. Clip on the green DogWatch training lead and take your dog outside and play a few
minutes in the Safety Zone.
3. Walk around the Safety Zone and have an assistant (friend or family member)
appear outside the Safety Zone at least 10 to 15 feet back from the flags. Walk
past your assistant without speaking, but remain in the Safety Zone.
4. If your dog approaches your assistant and enters the Avoidance Zone, allow your
dog to receive a correction. Yell, “Watch out!” and tug him back into the Safety Zone.
5. Let your assistant leave, walk your dog
around the perimeter again, and let your
assistant appear again. Your assistant can
call out the dog’s name, but do not allow
your assistant to ask the dog to “Come”.
6. If your dog attempts to go over to your
assistant, reinforce the flags and yell,
“Watch out!” Repeat the exercise for no
more than a total of 20 minutes.
7. If your dog makes no attempt to go over to
your assistant, reinforce the flags, end the
exercise and praise your dog in the Safety
Zone.
8. Repeat the exercise for 2 to 5 days. Then
move to Phase 4.
PHASE 4 (2-5 days)
Introduction to Increased Distractions
1. Put the DogWatch receiver collar on your dog at least 20 minutes before going
outside to train.
2. Clip on the green DogWatch training lead to
your dog’s regular collar and take him
outside. Play a few minutes in the Safety
Zone.
3. Reinforce the flags.
4. Introduce “real life” distractions to your dog.
Have a friend drop by or start training when
the letter carrier or school bus is scheduled.
Take extra care if you use a vehicle as a
distraction.
5. Keep the dog on leash when you first intro-
duce the distraction. If your dog attempts to
run past the flags and receives a correction,
he should retreat to the Safety Zone. Praise
and play with your dog.
Ask someo e to be a distractio
3
4
17
I troduce ‘real-life’ distractio s

18
6. If your dog retreats to the Safety Zone, drop the leash (but keep it within reach) and
reintroduce the distraction. Praise and play.
7. If your dog is afraid to move, tug him back into the Safety Zone. Continue to train
with distractions for 2 to 5 days.
Remember Play and praise at the end of each training session.
PHASE 5 (2-5 days)
Letting Your Dog Off The Leash
1. Put the DogWatch receiver collar on your dog at least 20 minutes before going
outside to train.
2. Clip on the green DogWatch training lead to your dog’s regular collar and take him
outside and play a few minutes in the Safety Zone. Remove the training leash and
let him run freely in the yard. Shake the flags to reinforce where his boundary is.
3. Important Your dog will expand his comfort level over a period of time. Your dog
should remain about 6 feet away from the flags when he is first let off the leash.
Gradually your dog’s safety zone will increase to his individual level of comfort.
Remove the flags, every other one, every other day.
hat To Expect Off Leash
1. Your dog will run toward the flags, see them and stop.
2. Your dog will run into the system, hear the “beep” warning and retreat.
3. Your dog will run into the system, hear the “beep” warning, receive a correction,
and retreat.
4. In rare cases, your dog will run through the boundary.
- Retrieve the dog. Take off the receiver collar and walk him back into the yard.
- Bring the dog into the house and call your DogWatch Dealer. Additional flag
training or an increase in correction level is necessary. Your DogWatch Dealer will
instruct you over the phone or meet with you and your dog for additional training.
Important Do not punish the dog verbally for making errors. He’s still learning!
PHASE 6 (2-5 days)
Taking Your Dog Outside The Boundary
Your dealer will recommend when it is time to take your dog across the boundary for a
walk. It is important to be consistent when taking your dog for a walk. Be sure to use
your dog’s regular collar and leash and go to and from your walk using the same “exit”
area. You can also pick up a small dog and carry him over the flagged boundary
during the first weeks of training.
5
6