domi LGMF8602A User manual

ASSEMBLY MANUAL
12' x 14' Sunroom with
Double Roof
d mi
o u t d o o r l i v i n g
Missing part? Damaged? Contact us via email at
[email protected]
MODEL#: LGMF8602A
www.domioutdoorliving.com
©Copyright 2022-2024 Domi Outdoor Living LLC. All Rights Reserved.

ser[email protected]

1

2

3

4

Pole Assembly
Beam Assembly
X4
5
X2

6

(1) Put the corner cover #M on the corner and secure with 4 bolts #4.
(2) Put the joint cover #M1 on the middle of the beam and secure
with 4 bolts #4.
7

Be aware of the direction of part #E, #E1, E2 and #E3
when installing.
!
8

(1) Slid 2 part #10 into part #J, slid 2 part #10 into part #J1
(part #10 is used as the nuts to install the screen panel to the track);
(2) Use 2 bolts #1 to connect part #J with part #J1;
(3) Repeat the above procedures to assemble the opposite side.
slid
9
4x

(1) Use 2 bolts #1 to connect part #K with part #K1;
(2) Repeat the above procedures to assemble the opposite side.
(3) Use 2 bolts #1 to assemble part #J and part #K1 to the pole.
(4) Repeat the above procedures to assemble the other 3 corners.
10
12x

You should pull up the 2 plugs on one side at the same time to
remove the window from the screen panel.
!
11

12

13

14

15 Be aware of the position of part #S & #S1, S2 and #S3
when installing.
!

(1) Glide the screen panel #S1 &S to the inner track.
(2) Glide the screen panel #S &S3 to the outer track.
16
FIRST TO DO:
!

17