Dorel DA1010-7MOV User manual

DA1010-7MOV
DOREL ASIA
Model No:
NIGHTSTAND
UPC CODE:
0-65857-17156-3
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
Date of purchase:
_______ / _______ / _______
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_____________________________________
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*DO NOT use power tools.
*
* Assembly will require two people.
*
If you have any questions about this product, contact our customer service representative
first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Customer Service Department No. 413
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980

HARDWARE LIST
123
456
789
LARGE CAM BOLT
14 PCS
SMALL WOOD DOWEL
2 PCS
LARGE WOOD DOWEL
16 PCS
FLAT HEAD SCREW
4 PCS
KNOB
1 PC
SMALL CAM LOCK
4 PCS
Ø4 X 25 mm
Ø8 X 30 mm Ø6 X 20 mm
Ø7 X 36 mm Ø13 X 10 mm
NIGHTSTAND
DA1010-7MOV
Ø5/32" X 7/8"
BOLT
1 PC
Ø15 X 11 mm
LARGE CAM LOCK
14 PCS
Ø7 X 28 mm
SMALL CAM BOLT
4 PCS

PARTS LIST
A B C
D E F
G H I
J K
NIGHTSTAND
DA1010-7MOV
RIGHT SIDE FRAME
1 PC
TOP PANEL
1 PC
LEFT SIDE FRAME
1 PC
DRAWER BACK
1 PC
DRAWER BOTTOM
1 PC
FRONT RAIL
1 PC
BACK PANEL
1 PC
RIGHT DRAWER SIDE
1 PC
DRAWER FRONT
1 PC
LEFT DRAWER SIDE
1 PC
BOTTOM PANEL
1 PC

STEP 1
NIGHTSTAND
DA1010-7MOV
Insert large cam bolts (4) into the left side frame (B) and right side frame (C) as shown
below.

STEP 2
NIGHTSTAND
DA1010-7MOV
Insert large cam locks (3) into the front and back rails (E & F) and bottom panel (D).
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Secure front and back rails (E & F) and bottom panel (D) to the left side frame (B) and
right side frame (C) by rotating the large cam locks (3) 1/2 turn clockwise using a Phillips
head screwdriver (not included).

STEP 3
NIGHTSTAND
DA1010-7MOV
Insert large cam bolts (4) into the top panel (A).

STEP 4
NIGHTSTAND
DA1010-7MOV
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Insert large cam locks (3) into the left side frame (B) and right side frame (C).
Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn
clockwise using a Phillips head screwdriver (not included).

STEP 5
NIGHTSTAND
DA1010-7MOV
Insert small cam bolts (6) and small wood dowels (2) into the front drawer panel (G).
Insert small cam locks (5) into the left drawer side (H) and right drawer side (I).
Attach drawer sides (H & I) to the front drawer panel (G). Secure the drawer sides by
rotating small cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver (not
included).
Slide the drawer bottom (K) into the grooves of drawer side (H & I) and front drawer
panel (G).

STEP 6
NIGHTSTAND
DA1010-7MOV
Attach drawer back (J) to the drawer sides (H & I) with flat head screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach knob (8) to the front drawer panel (G) with bolt (9).
Use a Phillips head screwdriver (not included) to tighten the bolt and screws.