Dormakaba CS 80 MAGNEO User manual

CS 80 MAGNEO
Automatic sliding door operator
Owner's Manual
DL3316-020 – 10-2022
| EN |

2 CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Table of Contents
Table of contents 
 General information 
. CS  MAGNEO operator configurations 
 To our customers 
 What you should know 
. Distributor information 
. CS  MAGNEO power configuration 
. Low energy power operated sliding and
folding doors ANSI/BHMA A. 
. Standard for Power Operated Pedestrian
Doors ANSI/BHMA A. 
. Mode switch (option) 
 AAADM Safety information label 
. Safety information label, full energy
automatic sliding doors
ANSI/BHMA A. 
 CS  MAGNEO door signage 
. CS  MAGNEO operator configured as
full energy ANSI/BHMA A. 
. CS  MAGNEO operator configured as
low energy ANSI/BHMA A. 
 Maintenance 
. CS  MAGNEO and glass door
environment and maintenance 
Table of contents

3CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 1
. Owner's Manual
This Owner's manual applies to dormakaba
CS  MAGNEO automatic sliding door operator
. Cover page illustration.
Cover page documents the CS  MAGNEO
ON-WALL operator configurations (Fig. .).
Reference Chapter . for all CS  MAGNEO
operator configurations.
. Manual storage.
This document must be kept in a secure place, and
accessible for reference as required.
If the door system should be transferred to another
facility, insure that this document is transferred as well.
. dormakaba.us website.
Manuals are available for review, download, and printing
on dormakaba.us website.
. Dimensions
Unless otherwise specified, all dimensions are given in
inches (“).
. Symbols used in this manual.
WARNING
This symbol warns of hazards which could result
in personal injury or threat to health.
CAUTION
This symbol warns of a potentially unsafe
procedure or situation.
 General information
Fig.1.1 MAGNEO ON-WALL operator configurations
ON-WALL
with MANET
ON-WALL
with WOOD
ON-WALL with
CLAMP

4 CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 1
. CS  MAGNEO operator configurations
Fig.1.1.2 MAGNEO ON-GLASS operator configurations
ON-GLASS
with MANET
ON-GLASS
with WOOD
ON-GLASS
with CLAMP
IN-WALL
with MANET
IN-WALL
with WOOD
IN-WALL with
CLAMP
Fig.1.1.3 MAGNEO IN-WALL operator configurations
ON-CEILING
with MANET
ON-CEILING
with WOOD
ON-CEILING
with CLAMP
Fig.1.1.4 MAGNEO ON-CEILING operator configurations
Fig.1.1.1 MAGNEO ON-WALL operator configurations
ON-WALL
with MANET
ON-WALL
with WOOD
ON-WALL with
CLAMP

5CS 80 MAGNEO 09-2021DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 2
 To our customers
We are pleased that a dormakaba CS  MAGNEO
automatic sliding door operator has been selected for
this installation. dormakaba designed, tested and built
the system to provide many years of service.
The purpose of this manual is to familiarize you with
your CS  MAGNEO automatic sliding door operator
system.
It is essential that you "know your system" and that you
recognize the importance of maintaining your door
system in compliance with industry standards for safety.
It is your responsibility as owner and caretaker of the
equipment, to inspect the operation of your door system
on a daily basis as outlined in Chapter , AAADM Safety
information label to insure that it is safe for use by your
customers and employees.
WARNING
Should the door fail to operate as prescribed
in the Safety information checklist or at any
other time for any reason, do not attempt to
repair or adjust the CS  MAGNEO operator
system!
Call your local authorized dormakaba USA, Inc.
distributor for repair. The distributor's AAADM certified
technicians are trained to service the CS  MAGNEO
sliding door operator using the dormakaba USA, Inc.
Installation and Troubleshooting Instructions, and in
accordance with ANSI/BHMA safety standards.
. Service availability.
dormakaba USA, Inc. has a nationwide network of
authorized distributors for sales, installation and service
of its products.
. Compliance with industry standards for safety.
Your CS  MAGNEO sliding door operator was
designed to the latest ANSI/BHMA operating and
safety standards.
In order to insure the continued safe operation of the
door, it is important that:
• Proper decals and labels be applied and maintained
on your doors (Chapter ).
• If decals and labels have been removed, or cannot be
read, contact your local authorized
dormakaba USA, Inc. distributor for replacement
decals or labels.

6 CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 3
 What you should know
.. dormakaba USA, Inc. distributor information.
Be sure that the dormakaba USA, Inc. distributor has
provided the following information for each door
installation:
. dormakaba CS  MAGNEO Owner's Manual
DL-,
. Review of the daily Safety information checklist
(Chapter ).
. Instructions on how to conduct the daily Safety
Information checklist by walk through example.
. Annual compliance inspection label completion
(Chapter ).
. Circuit breaker or disconnect location for
 Vac power to the CS  MAGNEO operator.
. CS  MAGNEO mode switch (optional) location and
instructions in its use. (Para. .).
. Discussion of problems that could result from
operator being allowed to operate after a
malfunction is observed.
. Number to call for service or questions about your
system if you are uncertain of any condition or
situation.
WARNING
If there are any problems, discontinue door
operation immediately and secure the door in
a safe manner.
Call your local dormakaba USA, Inc.
distributor for repair.
. Distributor information
.. Knowing act definition (ANSI/BHMA A.).
Any conscious action with the expected result of
opening a door. This includes but is not limited to:
• Wall or jamb mounted contact or non contact
switches such as pushplates.
• The action of of manually opening (pushing, pulling
or sliding) a door.
• Controlled access devices such as keypads, card
readers, wireless transmitters and key switches.
. Low energy power operated
sliding and folding doors
ANSI/BHMA A.
.. Low energy power operator door definition
(ANSI/BHMAA.).
A door with a power mechanism that opens the door
upon receipt of a knowing act activating signal
(Para. ..), does not generate more kinetic energy
than specified in this standard, and is closed by a power
mechanism or other means.
. Standard for Power Operated
Pedestrian Doors
ANSI/BHMA A.
.. Power operated door definition
(ANSI/BHMA A.).
The combination of door, operator, controls and sensors
constituting the system. (Also called automatic door.)
. CS  MAGNEO power
configuration
CS  MAGNEO can be configured for:
• Low energy power operated sliding door (Para. .).
• Power operated (full energy) sliding door (Para. .).

7CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 3
. Mode switch (option)
.. Mode switch position descriptions.
Auto
. Door opens automatically when one of the
activators is actuated or triggered.
Door closes on expiration of adjustable hold open
time with no activators or actuators triggered.
. With knowing act device actuation (Para. ..).
Door will remain at full open position for not less
than  seconds before starting the door closing
cycle.
Close
. Door will remain closed, or if door is open door will
close.
Open
1. Door opens automatically and remains open.
Auto
Fig. 3.5.1 Auto
.. Mode switch positions.
Close
Fig. 3.5.2 Close
Fig. 3.5.3 Open
Open

8 CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 4
. Safety information label, full energy automatic sliding doors
ANSI/BHMA A.
.. Automatic sliding door safety information label.
This AAADM label outlines safety checks that should be
performed daily on automatic sliding door controlled by
a CS  MAGNEO sliding door operator configured for
full energy.
.. Safety information label location.
Place label in a protected, visible location on door frame,
near operator power switch if possible.
.. Annual compliance section of label.
This section of label is only completed on automatic
sliding doors that comply with the ANSI/BHMA A.
standard and pass inspection by a AAADM certified
dormakaba USA, Inc. technician.
.. Annual compliance inspection labels.
Place additional labels over annual compliance
inspection section of safety information label.
Fig. 4.1.1 Safety information label DD1269-010
ANNUAL COMPLIANCE
INSPECTION
INSPECT FOR AND
COMPLIES WITH ANSI
A156.10 ON:
DATE: _____________
by AAADM Certified
Inspector
Number: ____________
Fig. 4.1.2 Annual compliance inspection labels
 AAADM Safety information label
These minimum safety checks,
in addition to those in the
Owner’s Manual, should be
made each day and after any
loss of electrical power:
SAFETY INFORMATION
Automatic Sliding Doors
Walk toward the door at a
normal pace. The door
should open when you are
about 4 feet from the door.
Stand motionless on
threshold for at least 10
seconds. The door should not
close.
Move clear of the area. The
door should remain open for
at least 1.5 seconds and
should close slowly and
smoothly.
Repeat steps 1 through 3
from other direction if door
is used for two way traffic.
Inspect the floor area. It
should be clean with no
loose parts that might cause
user to trip or fall. Keep
traffic path clear.
Inspect door’s overall
condition. The appropriate
signage should be present.
Have door inspected by an
AAADM certified inspector
at least annually.
1.
2.
3.
4.
5.
6.
7.
DO NOT USE DOOR if it fails
any of these safety checks or if
it malfunctions in any way. Call
a qualified automatic door
service company to have door
repaired or serviced.
See Owner’s Manual or
instructions for details on
each of these and other
safety items. If you need
a copy of the manual,
contact the manufacturer.
PLACE COMPLETED ANNUAL
COMPLIANCE INSPECTION LABEL
HERE.
AAADM
American Association of Automatic
Door Manufacturers
AAADM - 2495

9CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Chapter 5
 CS  MAGNEO door signage
Signage and warnings are specified in
ANSI /BHMA A., American National Standard for
Power Operated Pedestrian Doors, paragraph .
.. AUTOMATIC DOOR decal.
All swinging, sliding and folding doors shall be equipped
with signage visible from both sides reading
"AUTOMATIC DOOR" with letters /" high minimum.
.. STAND CLEAR decal.
Sliding doors that slide alongside an adjacent sidelite or
wall shall be equipped with a sign that instructs users
to stand clear of the sliding door travel path. The letters
shall be " high minimum and located at " to "
from the floor.
.. Knowing act door - ACTIVATE SWITCH TO
OPERATE decal.
Knowing act doors shall have signage stating
"ACTIVATE SWITCH TO OPERATE" on side of door
having knowing act switch. Each sign in minimum /"
high letters.
.. Overview Fig. 5.1.1 AUTOMATIC DOOR decal
. CS  MAGNEO operator configured as full energy,
ANSI/BHMA A.
Fig. 5.1.2 STAND CLEAR decal
Fig. 5.1.3 ACTIVATE SWITCH TO OPERATE decal
. CS  MAGNEO operator configured as low energy, ANSI/BHMA A.
.. Overview
Signage and warnings are specified in
ANSI /BHMA A., American National Standard for
Low Energy Power Operated Sliding and Folding Doors.
.. Automatic door.
Doors shall be equipped with signage visible from both
sides reading "AUTOMATIC DOOR" with letters
/" [ mm] high.
.. Knowing act door - ACTIVATE SWITCH TO
OPERATE decal.
Knowing act doors shall have signage stating
"ACTIVATE SWITCH TO OPERATE" on side of door
having knowing act switch."
• When knowing act switch is used, it shall be installed in
a location within view of the door, have an installation
height of a minimum of " and a maximum of ", or
as specified in local building codes; shall remain
accessible when the door is opened; and shall not be
located in a position where the user would be in the path
of the moving door. If located seven feet or more from
the center of the door, there shall be an additional time
delay of two seconds for each additional foot.
Fig. 5.2.1 AUTOMATIC DOOR decal
DD-
AUTOMATIC DOOR
DD0757-010
DD-
STAND CLEAR
DD2632-010
DD-
DD0758-010
ACTIVATE SWITCH
TO OPERATE
DD-
Fig. 5.2.2 ACTIVATE SWITCH TO OPERATE decal
DD0758-010
ACTIVATE SWITCH
TO OPERATE
DD-
AUTOMATIC DOOR
DD0757-010
DD-

10 CS 80 MAGNEO 10-2022DL4616-006
CS 80 MAGNEO Owner's Manual Chapter 6
 Maintenance
. CS  MAGNEO and glass door environment and maintenance
.. Areas around door(s) and door sliding area.
Areas around door and door sliding area must be kept
clean and clear of all obstacles.
.. Cleaning
WARNING
Cleaning of CS80 MAGNEO operator cover
must be done with Mode switch (Para. 3.6) in
Close position!
External surfaces (covers) of the CS  MAGNEO can
be cleaned with a damp cloth and commercial cleaning
agents.
TIPS AND RECOMMENDATIONS
Abrasive (scouring) agents should not be used
as they may damage external surfaces.
.. Water and other liquids.
CAUTION
No water or other liquids must be sprayed or
spilled on CS 80 MAGNEO operator!
Fig. 6.1.1 CS 80 MAGNEO operator examples

11CS 80 MAGNEO 10-2022DL3316-020
CS 80 MAGNEO Owner's Manual Blank page
This page left intentionally blank.

dormakaba USA, Inc.
1 Dorma Drive, Drawer AC
Reamstown, PA 17567
USA
T: 717-336-3881
F: 717-336-2106
www.dormakaba.us