dosatron IPK34-14 GPM User manual

Dosatron unit sold separately.
ASSEMBLY INSTRUCTIONS
IPK34 - 14 GPM
Industrial Plumbing Kit
2090 Sunnydale Blvd. Clearwater, FL 33765
727-443-5404 800-523-8499 
For units: D14MZ2, D14MZ5, D14MZ10, D14MZ3000
2015-02 LA 2011-140-GEN23_14 GPM
For quick priming (helpful at low water flows):
Shut off outlet ball valve
Insert injection hose into the chemical container
Turn on the stainless steel ball valve (collect discharged
solution or send it to drain)
Observe the injection hose. When full, count 10 clicks
Shut off stainless steel ball valve
Turn outlet ball valve on
For sample collection:
Make sure the unit is primed
Shut off outlet ball valve
Turn stainless steel ball valve on
In a clean container, collect 2.5 gallons of diluted solution
Shut off stainless steel ball valve
Collect sample out of the 2.5 gallons and check
concentration
Turn on the outlet valve

Customer Service and Technical Support
1 - 8 0 0 - 5 2 3 - 8 4 9 9
Attach instruction card to injector with zip tie provided.
2 3/4” polypropylene Banjo single union ball valve
1 3/4” polypropylene 200 mesh tee filter
1 3/4” brass pressure regulator w/gauge
1 3/4” 14 GPM flow restrictor
1 3/4” polypropylene check valve
2 3/4” union schedule 80 PVC
7 3/4” x 2” Banjo polypropylene fittings
1 1/2” x 1/2” Banjo barb fitting
1 3/4” Banjo T
3 3/4” Banjo street elbows
1 Roll of Teflon tape
1 Instruction card
1 Zip tie
IPK34 - 14 GPM includes:
1 1/2” x 2” Banjo polypropylene fittings
1 1/2” stainless steel ball valve
1 3/4” male to 1/2” female Banjo reducer bushing
Wrap all male fittings with eight (8) turns of Teflon tape
if white, only four (4) turns if thicker pink tape.
Install the following with their arrows pointing in the
same direction as the flow:
Check valve
Filter
Pressure regulator

Inlet
ball
valve
Street
elbow Street
elbow
Check
valve
Stainless
steel ball
valve
Filter
Pressure
regulator
w/gauge
Union
Union
Street
elbow
Inlet
Outlet

Flow
restrictor

Instruction
card
When connecting a DOSATRON either to the public water supply or to its own water source, you
must respect the regulations in force concerning protection of the source i.e. backflow prevention, etc.
Reducer
bushing
Outlet
ball
valve
T
Barb
fitting
3/4”
fitting
1/2”
fitting
Teflon tape
(Use 8 turns of Teflon
tape if white, only 4 turns
for thicker pink tape)