Doyon D20 User manual

1. HYDRAULIC DIVIDER
D20
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS
SECTION « A » DESCRIPTION PAGE
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
For more information, please call our office: . . . . . . . . . . . . . . . . . . . . . . . A4
SECTION « B » DIMENSIONS
D20- FRONT & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1
D20- BACK & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2
SECTION « E » COMPONENT PARTS
D20- COMPONENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1
SECTION « G » ELECTRIC SCHEMATIC
D20- 208-240V/3PH/50/60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D20-A.DOC Rev. 12-2007

A 1
CAUTION
The manufacturer suggests to read this manual carefully.
INTRODUCTION
This equipment is manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.
A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.
Drawings, electrical diagram and replacement parts numbers are included in this manual.
ATTENTION
DOYON is not responsible for damages to the property or the equipment caused
by personnel who is not certified by known organisations.

A 2
SHIPPING
For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.
IMPORTANT
RECEPTION OF THE MERCHANDISE
Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order that they do their inspection.
We do not assume the responsibility for damages or losses that may occur during transportation.
IN GENERAL
Take off the packaging material with care. Take off all the material used for packing and
accessories.
This equipment can be plugged on any network offering a protection of 15 amps.
INSTALLATION WARNINGS
INSTALLATION AND SERVICE
This equipment must be connected to the utility and electrically grounded in conformity to the
effective local regulations. If these are not established, this equipment must be connected according
to the National Electrical Code (NFPA 70-XX). This equipment has a male plug that meets those
requirements.

A 4
FOR MORE INFORMATION,
PLEASE CONTACT OUR OFFICE:
DOYON EQUIPMENT INC.
1255, rue Principale
Linière, Qc, Canada G0M 1J0
Tel. : [phone]
Canada : 1 [phone]
U.S. : 1 [phone]
FAX : [phone]
Internet: http://www.doyon.qc.ca
E-Mail : [email protected]

SECTION
B
DIMENSIONS

SECTION
E
COMPONENT PARTS

E-4
List of spare part
Number Designation Quantity
8 Lever handle 2
20 Hydraulic jack 1
25 Black push button 1
26 Stop button 1
27 Contactor switch 1
28 Revolving wheels 4
29 Distributor 1
56 Distributor pump hose 1
57 Distributor tank hose 1
58 Distributor jack hose 1
59 Distributor jack hose 1
60 Tank jack hose 1
66 Thermal relay T25 DU4 1
67 Contact NO 1
68 Contact NF 1
103 Oil Condat hydrolub S46 18 liters
104 Motor 1.5 Kw 208V 60 Hz 1
105 Pump 1
106 Oil sump filter 1
112 Coupling 1
217 Cover spring 1

SECTION
G
ELECTRIC SCHEMATICS

LIMITED WARRANTY
(Continental United States Of America And Canada only)
Doyon Equipment Inc. guarantees to the original purchaser only that its product
are free of defects in material and workmanship, under normal use.
This warranty does not cover any light bulbs, thermostat calibration or defects due
to or resulting from handling, abuse, misuse, nor shall it extend to any unit from
which the serial number has been removed or altered, or modifications made by
unauthorized service personnel or damage by flood, fire or other acts of God. Nor
will this warranty apply as regards to the immersion element damaged by hard
water.
The extent of the manufacturer’s obligation under this warranty shall be limited to
the replacement or repair of defective parts within the warranty period. The
decision of the acceptance of the warranty will be made by Doyon Equipment
service department, which decision will be final.
The purchaser is responsible for having the equipment properly installed, operated
under normal conditions with proper supervision and to perform periodic
preventive maintenance.
If any parts are proven defective during the period of one year from date of
purchase, Doyon Equipment Inc. hereby guarantees to replace, without charge,
F.O.B. Linière, Quebec, Canada, such part or parts.
Doyon Equipment Inc will pay the reasonable labor charges in connection with
the replacement parts occurring within one year from purchase date. Travel over
50 miles, holiday or overtime charges are not covered. After one year from
purchase date, all labor and transportation charges in connection with replacement
parts will be the purchaser’s responsibility.
Doyon Equipment Inc. does hereby exclude and shall not be liable to purchaser
for any consequential or incidental damages including, but not limited to, damages
to property, damages for loss of use, loss of time, loss of profits or income,
resulting from any breach or warranty.
In no case, shall this warranty apply outside Canada and continental United States
unless the purchaser has a written agreement from Doyon Equipment Inc.