Draper 82460 User manual

These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
82460, 82583
Stock No.82583Stock No.82460

10/15L EPDM
PRESSURE
SPRAYERS

1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: 10/15L EPDM Pressure Sprayers
Stock No’s: 82460, 82583
Part No’s: EWS-10-EPDM/B, EWS-12-EPDM
As our user manuals are continually updated, users should make sure that they
use the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: [phone]
General Fax: [phone]
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the
product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational
use only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in
any other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.2 REVISIONS:
Date first published June 2017.

2.1 CONTENTS
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION ................................................................................................................. 1
1.2 REVISION HISTORY ..........................................................................................................2
1.3 UNDERSTANDING THIS MANUAL..................................................................................... 2
1.4 COPYRIGHT NOTICE......................................................................................................... 2
2. CONTENTS
2.1 CONTENTS......................................................................................................................... 3
3. GUARANTEE
3.1 GUARANTEE ...................................................................................................................... 4
4. INTRODUCTION
4.1 SCOPE ................................................................................................................................ 5
4.2 SPECIFICATION ................................................................................................................. 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS................................................................................. 6
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ................................................................................................................ 7
7. UNPACKING AND CHECKING
7.1 PACKAGING ....................................................................................................................... 8
7.2 WHAT’S IN THE BOX..........................................................................................................8
8. ASSEMBLY
8.1 WHEEL ASSEMBLY ...........................................................................................................9
8.2 HANDLE ASSEMBLY........................................................................................................ 10
8.3 LANCE ASSEMBLY .......................................................................................................... 11
8.4 NOZZLE ASSEMBLY......................................................................................................... 11
8.5 ATTACHING THE HOSE .................................................................................................. 11
9. OPERATION AND USE
9.1 FILLING THE SPRAY BOTTLE ......................................................................................... 12
9.2 PRESSURISATION ........................................................................................................... 12
9.3 SAFETY PRESSURE VALVE............................................................................................ 13
9.4 SPRAY OPERATION ......................................................................................................... 13
9.5 FLOW RATE ......................................................................................................................13
9.6 VARIABLE SPRAY PATTERN ........................................................................................... 13
10. MAINTENANCE
10.1 MAINTENANCE ..............................................................................................................14
10.2 TROUBLESHOOTING..................................................................................................... 14
11. DISPOSAL
11.1 DISPOSAL ....................................................................................................................... 15
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
- 3 -

3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: [phone] or:
Product Helpline [phone].
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -

4. INTRODUCTION
4.1 SCOPE
Special EPDM seals and gaskets material allows for use with high temperature water, glycol,
detergents, acid, organic and inorganic bleaching agents and hydraulic oils.
4.2 SPECIFICATION
Stock No’s ....................................................... 82460 .............................................................. 82583
Part No’s.................................................EWS-10-EPDM/B...................................... EWS-12-EPDM
Bottle capacity................................................... 10L .................................................................... 15L
Working capacity ................................................ 8L ..................................................................... 12L
Max working pressure ......................................40psi................................................................ 40psi
Weight (empty sprayer only)...........................1.181kg.......................................................... 3.960kg
- 5 -

5.1 GENERAL SAFETY INSTRUCTIONS
WARNING: READ and UNDERSTAND this instruction booklet completely before using these
sprayers.
The user must always ask the dealer for the safety card of the chemical product to be
used, also for disposal of the residual liquid. The use of substances not in conformity with
the current regulations is at the user’s risk and peril.
Note: After use, rinse the container then operate the pump with clean water to completely empty
the container and piston.
5. HEALTH AND SAFETY INFORMATION
- 6 -
Never open the pump when under
pressure.
Do not leave the sprayer exposed to
heat sources or intense cold.
Do not use for spraying food products
(wine, milk, etc.).
Variable spray nozzle.
Use suitable protective clothing
during use.
Use suitable face mask and eye
protection.
Do not eat, drink or smoke during use.
Do not spray on windy days.
Wash hands and face after use.
Keep out of the reach of children.
Keep bystanders away whilst
using the sprayer.
Seek medical attention if spray
gets in eyes, or if other symptoms
develop during spraying.
Never abandon potentially hazardous
chemicals in the environment,
drainage or sewerage systems.
Do not spray toxic or harmful liquids
on persons, animals or foodstuffs.

- 7 -
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
 Pump handle.
 Safety valve.
 Wheel.*
 Wheel cover.*
 Spray bottle.
 Nozzle.
 Lance.
 Fill inlet.
 Trigger assembly.
 Hose.
 Foam handle grip.*
 Handle.*
 Lance holder.*
 Carry strap.Ɨ





















*Applicable to Stock No.82583 only.
ƗApplicable to Stock No.82460 only.
Stock No.82583
Stock No.82460

7. UNPACKING AND CHECKING
7.1 PACKAGING
Carefully remove the product from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the product.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHAT’S IN THE BOX?
There are a number of parts in the box which need to be assembled.
- 8 -
 Pump handle.
 Wheel.*
 Wheel cover.*
 Spray bottle.
 Nozzle.
 Lance.
 Trigger assembly.
 Hose.
 Foam handle grip.*
 Handle.*
 Lance holder.*
 Carry strap.Ɨ
 Wheel axle.*
 Wheel washers.*
 Wheel locking pins.*
 Suction tubing.
 Pump assembly.

Handle fixings.*










   
 

 
*Applicable to Stock No.82583 only.
ƗApplicable to Stock No.82460 only.


FIG.1
FIG.2
FIG.3
FIG.4
8. ASSEMBLY
8.1 WHEEL ASSEMBLY (82583 only)
– FIGS. 1 – 4
– Slide the wheel axle through both of the
axle mounting brackets located on the
bottom of the spray bottle .
– Slide one of the wheels onto the axle.
– Thread a wheel washer over the end of
the axle.
– Using a pair of long nose pliers (not
supplied) insert a locking pin into the
hole at the end of the axle to lock the wheel
in place.
– Place a wheel cover onto the wheel and
press fit in place.
– Repeat the above steps for the other wheel.
- 9 -










8. ASSEMBLY
- 10 -
FIG.5
FIG.6
FIG.7
FIG.8
8.2 HANDLE ASSEMBLY
(82583 only) – FIGS. 5 – 8
– Slide the 2 handle fixings over the
handle section .
– Slide the 2 shafts of the handle over
the handle mounting sections moulded into
the spray bottle  .
– Turn the 2 handle fixings clockwise to
secure the handle in place .
– Position the lance holder onto the
handle , locating it with the hole in the
shaft.
– Press fit the lance holder into place on the
shaft.










- 11 -
8. ASSEMBLY
FIG.9
FIG.10
FIG.11
FIG.12
8.3 LANCE ASSEMBLY – FIGS. 9 – 10
– If not already in place, make sure the rubber
gasket $and compression fittings %
and &are arranged onto the lance in
the correct order, as shown in FIG.9.
– Slide the the end of the lance into the trigger
assembly .
– Screw the compression fitting &to secure
the trigger and lance.
8.4 NOZZLE ASSEMBLY – FIG. 11
– If not already in place, make sure the rubber
gasket 'and compression fitting (are
in place on the end of the lance.
– Slide the nozzle  onto the end of the
lance.
– Tighten the compression fitting to secure the
nozzle in place.
8.5 ATTACHING THE HOSE – FIG. 12
– If not already in place, make sure the rubber
seal )is in situated on the hose inlet
.
– Insert the suction tubing of the hose
into the spray bottle through the hose
inlet .
– Screw the compression fitting *to secure
the hose in place.



)
*
 


$%&
&
' (


- 12 -
9. OPERATION AND USE
FIG.13
FIG.14
FIG.15
FIG.16
9.1 FILLING THE SPRAY BOTTLE –
FIGS. 13 – 15
– Unscrew the pump handle  anti-clockwise
to loosen and remove from the pump
handle/assembly from the fill inlet .
– Fill the spray bottle with your chosen liquid
to the desired level through the fill inlet .
Note: Whilst the fill inlet incorporates a flanged
rim to help avoid spillages, the additional use of
a large funnel +may be adviseable,
especially when using potentially hazardous
liquids.
– Replace the pump handle/assembly and
screw anti-clockwise to close.
9.2 PRESSURISATION – FIG. 16
Working spraying pressure is achieved by
pumping the handle approximately 30 times.
Note: Try to avoid overfill with either air or
liquid. Air will bleed from the safety pressure
valve if the pressure exceeds 2.5bar. (see the
following section for more information).




+



×30

- 13 -
9. OPERATION AND USE
FIG.17
FIG.18
FIG.19
FIG.20
9.3 SAFETY PRESSURE VALVE
– FIG. 17
The safety pressure valve will open when
the pressure exceeds 2.5bar. It can also be
opened manually to vent remaining pressure
prior to opening.
– To open the valve manually, pull up on the
valve to release pressure.
9.4 SPRAY OPERATION – FIG. 18
The sprayer is operated by depressing the
trigger .
– For continuous spraying pull the metal
locking catch  forward and locate onto
the plastic lug, locking the trigger in the
open position.
Note: Stock No.82460 incorporates a slightly
different mechanism in it’s trigger assembly.
9.5 FLOW RATE – FIG. 19
The force of the spray can be regulated using
the flow adjustment dial located on the
trigger assembly.
– Turn the dial anti-clockwise for increased
flow rate and clockwise to decrease the flow
rate.
9.6 VARIABLE SPRAY PATTERN –
FIG. 20
The spray pattern can be varied by rotating the
nozzle .
– The sequence of spray patterns varies from
fine jet, through to wide fan.






10. MAINTENANCE AND TROUBLESHOOTING
- 14 -
10.1 MAINTENANCE
– After use, rinse the container then operate the pump with clean water to completely empty the
container and piston.
– At least once a year clean pump thoroughly, re-grease or lubricate all moving parts.
Warning: When assembling and servicing, carefully insert the pump piston without forcing, so as
not to damage the gasket.
10.2 TROUBLESHOOTING
Fault
Weak or no spray.
Distorted spray.
Non-pressurisation.
Loss of pressure.
Obstruction.
Obstruction.
Check and tighten
connections, if necessary.
Check gaskets are lubricated
and show no signs of wear –
replace if necessary.
Check for possible blockage
in nozzle, trigger or outlet
hose.
Check for possible debris
partially obstructing nozzle.
Leakage. Possible sediment
accumulation on sealing
surfaces.
Check sealing rings are free
from debris and sediment –
clean or replace if necessary.
Problem Solution

11. DISPOSAL
- 15 -
11.1 DISPOSAL
– At the end of the product’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
– Contact your local authority for details of collection schemes in your area.
In all circumstances:
• Do not incinerate.
• Do not abandon in the environment.
•
When using chemical products, consult the corresponding documentation for the correct
method of disposal of any excess materials. If in any doubt, seek advise from your local
authority or a certified disposal contractor.
•Do not dispose of excess chemicals into drainage/sewerage systems or into the natural
environment.

Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: [phone]
Sales Desk: [phone]
Internet: drapertools.com
E-mail: [email protected]
General Enquiries: [phone]
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
CONTACTS
YOUR DRAPER STOCKIST
TACH0617