Draper 82468 User manual

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
6.25L
PRESSURE
SPRAYER
82468

- 1 -
1. SPECIFICATION
1.1 SCOPE
For use with water, herbicides, pesticides and solvent-free preservative treatments.
1.2 SPECIFICATION
Stock no. ............................................................................................................................ 82468
Part no. .......................................................................................................................... PS6.25/B
Bottle capacity ..................................................................................................................... 6.25L
Working capacity ...................................................................................................................... 5L
2. HEALTH & SAFETY INFORMATION
2.1 GENERAL SAFETY WARNINGS
WARNING: READ and UNDERSTAND the instructions completely before using these sprayers.
The user must always ask the dealer for the safety card of the chemical product to be used, also
for disposal of the residual liquid. The use of substances not in conformity with the current
regulations is at the user’s risk and peril.
Never open the pump when
under pressure.
Do not leave the sprayer
exposed to heat sources or
intense cold.
Do not use for spraying food
products (wine, milk, etc.).
Do not spray toxic or harmful
liquids on persons, animals or
foodstuffs.
Use suitable protection
equipment during use.

- 2 -
3. OPERATION AND USE
4. MAINTENANCE
1. Unscrew the pump handle in
an anticlockwise direction.
2. Fill with the desired liquid
to the Max fill line as
shown on bottle.
3. Screw the pump handle back
down in a clockwise direction.
4. Pump the sprayer about
30 times.
5. The safety valve will leak if
the air pressure is too high.
Do not overfill with air or
liquid .
6. The sprayer will work
when the trigger on the
nozzle handle is
depressed.
7. To spray continuously, slide
the trigger forward into lock
position after depressing.
To unlock, slide the trigger
back.
8. Adjustable nozzle control,
from mist to jet.
9. Always release pressure when
task is complete.
10. Empty, then rinse bottle
with clean water.
< 25ºC
MAX.
MAX
Max.30
Max.30
ON
LOCK
• After use, rinse the container then operate the pump with clean water to completely empty the
container and piston.
• At least once a year clean pump thoroughly, re-grease or lubricate all moving parts.
WARNING:
When assembling and servicing, carefully insert the pump piston without forcing, so as not to
damage the gasket.

CONTACTS
- DRAPER TOOLS LIMITED,
Hursley Road, Chandler's Ford,
Eastleigh, Hampshire. SO53 1YF. U.K.
- Helpline: [phone]
- Sales Desk: [phone]
- Internet: www.drapertools.com
- E-mail: [email protected]
- Sales Fax: [phone]
- General Enquiries: [phone]
- Service/Warranty Repair Agent
For aftersales servicing or warranty repairs, please
contact the Draper Tools Helpline for details of an
agent in your local area.
YOUR DRAPER STOCKIST
TACH1216
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means, electronic, mechanical photocopying,
recording or otherwise without prior permission in writing from Draper Tools Ltd.