Draytek vigorphone 300 User manual

- 1 -
V
Vi ig go or rP Ph ho on ne e 3 30 00 0
Quick Start Guide
Version: 1.0
Date: 13/02/2012
Warranty
We warrant to the original end user (purchaser) that the modem will be free from any defects in workmanship or materials
for a period of one (1) year from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as
it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have
indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective
products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent
product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified,
misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not
cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product
will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make
changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: VigorPhone 300
DrayTek Corp. declares that VigorPhone 300 is in compliance with the following essential requirements and other relevant
provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying
with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements
set forth in EN60950-1.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.

- 2 -
Package Contents
Thank you for purchasing VigorPhone 300! Please check the content of package before
you start to use this product. If any item is missing, please contact your dealer.
nIP Phone oCD pQuick Start Guide qRJ-45 Cable
(Ethernet)
r
Phone Stand /Bracket
s
Handset
t
UK-type power adapter
USA/Taiwan-type
power adapter
EU-type power adapter
AU/NZ-type Power
Adapter
Descriptions of Components
Here are the descriptions of all major components and function keys of this
phone:
Item. Name Description
1 Headset Jack Connects to an external
headset.(RJ-9)
2 Handset
Jack Connects to the phone.(RJ-9)
3 LAN/PC
Port Connects to PC. 10/100Mbps RJ-45 port for PC (downlink) connection.
Connects to LAN cable.
4 WAN/ PoE
Port 10/100Mbps RJ-45 port for LAN (uplink) connection. If you are
using Power over Ethernet (PoE),
the power to the phone is supplied
when you connect the Ethernet
cable. Draws power from either
spare line or signal line.
5 Power Jack Connects to AC power adapter. 5V
AC power port.

- 3 -
Item Name Description
1 Memory key (1-6) Users could store their commonly used number in these keys, and call for
them as speed dial.
2 Display Screen Displays calls and status information.
3 Soft key 1/2/3 Keys combination, include functions such as SMS / SDial /PBook /Answer
/Conf /Enter /Save /Quit /Edit /Redial and so on.
4 Navigation Left: Checking Incoming call / Up: Checking Missed Call
Right: Checking line status / Down: Checking IP info
OK: Enter into the phone's menu
5 Release key Skip to stand-by mode.
6 Mute Press this key in calling mode, you can hear the other side, and the other
side can not hear you.
7 Envelope LED inside, if blinks remind user have new voicemail.
8 HeadSet Button Place and receive calls through an optionally connected headset.
9 Transfer Use the key to realize blind transfer or attended transfer.
10 Hold Temporarily hold the active call during the talking.
11 Volume -/+ Turn down or turn up the volume by pressing these two keys
12 Headset Jack Allow to connect another headset optionally. (Port type: 3.5mm jack)
13 Hands-free Make the phone into hands-free mode.
14 Redial 1. In the hook off /hands-free mode, use the key to dial the last call
number.
2. In stand-by mode, it has a function to check the OUTGOING CALL.
15 Line1/2/3 Three SIP lines allow you to select any one to make the call, if it has been
registered.
16 Indicator light If the light blinking, indicate the phone has missed call

- 4 -
Setup Your IP Phone
Please follow the instructions listed below to setup your IP Phone:
Accessing Web Configurator
1. Press the down button on the Navigation to see the IP address (e.g,
192.168.1.172) displayed on the LCD screen.
2. Open your browser (such as Internet Explorer, Firefox, etc.) and type in
the web address (e.g., 192.168.1.172) of the phone.
3. The Web login page is displayed. Enter the user name (default: admin)
and the password (default: admin) and click Login.
For more detailed information about network configuration, please refer to User’s Manual.