Dreame D10s Plus User manual

For more support, contact us via [e-mail]
Website: https://global.dreametech.com
Manufactured by: Dreame Trading (Tianjin) Co., Ltd.
Made in China
"󸵦󸋀" יניסה םשה לילצ לע ססובמה קיתעת והז .Dreame Technology Co., Ltd. and its subsidiaries תיניסה הרבחה לש רצוקמה ומש וניה Dreame
.היגולגונכטה םוחתב קסופ יתלב ןפואב ףורדלו שפחל הרבחה ןוזח תא וכותב שיחממו
󸵦󸋀

󾖶󾖶󾖷󾖶 󸵦󸋀 󾖶
󽗊󾖷

 󸵦󸋀 

󽗉
󽗊
󽗉 󸵦
󸋀 

󽗉󽗊

 󸵦󸋀 

łł󽗉 󸵦󸋀 ąż
łśżęęąę󽗉ąął
EN
DE
FR
IT
ES
RU
PL
HE
SA

Auto-Empty Robot Vacuum and Mop
User Manual
D10 s



1
EN
Contents
User Manual
Benutzerhandbuch
Manuel d'utilisation
Manuale utente
Manual de usuario
Инструкция по эксплуатации
Instrukcja obsługi
1
26
52
77
102
127
153
178
202

EN
DE
FR
IT
ES
RU
PL
HE
SA
שמתשמל ךירדמ
Usage Restrictions
To avoid electric shock, fire or injury caused by improper use of the appliance, please read the user manual
carefully before using the appliance and keep it for future reference.
Safety Information
This product should not be used by children younger than 8 years old nor persons
with physical, sensory, intellectual deficiencies, or limited experience or knowledge
without the supervision of a parent or guardian to ensure safe operation and to
avoid any risks. Cleaning and maintenance shall not be performed by children
without supervision.
Children shall not play with this product. Ensure children and pets are kept at a safe
distance from the robot while it is operating.
If the power cord becomes damaged or broken, stop using it immediately and
contact after-sales service.
This product is for floor cleaning in a home environment only. Do not use it outdoors,
on non-floor surfaces, or in a commercial or industrial setting.
Do not use the robot in an area suspended above ground level without a protective
barrier.
Do not place the robot upside down. Do not use the LDS cover, robot cover, or
bumper as a handle for the robot.
Do not use the robot at an ambient temperature above 40° C or below 0° C or on a
floor with liquids or sticky substances.
Pick up any cables from the floor before using the robot to prevent it from dragging
them while cleaning.
Remove fragile or small items from the floor to prevent the robot from bumping into
and damaging them.

1
EN
Contents
User Manual
Benutzerhandbuch
Manuel d'utilisation
Manuale utente
Manual de usuario
Инструкция по эксплуатации
Instrukcja obsługi
1
26
52
77
102
127
153
178
202

EN
DE
FR
IT
ES
RU
PL
HE
SA
שמתשמל ךירדמ
Usage Restrictions
To avoid electric shock, fire or injury caused by improper use of the appliance, please read the user manual
carefully before using the appliance and keep it for future reference.
Safety Information
This product should not be used by children younger than 8 years old nor persons
with physical, sensory, intellectual deficiencies, or limited experience or knowledge
without the supervision of a parent or guardian to ensure safe operation and to
avoid any risks. Cleaning and maintenance shall not be performed by children
without supervision.
Children shall not play with this product. Ensure children and pets are kept at a safe
distance from the robot while it is operating.
If the power cord becomes damaged or broken, stop using it immediately and
contact after-sales service.
This product is for floor cleaning in a home environment only. Do not use it outdoors,
on non-floor surfaces, or in a commercial or industrial setting.
Do not use the robot in an area suspended above ground level without a protective
barrier.
Do not place the robot upside down. Do not use the LDS cover, robot cover, or
bumper as a handle for the robot.
Do not use the robot at an ambient temperature above 40° C or below 0° C or on a
floor with liquids or sticky substances.
Pick up any cables from the floor before using the robot to prevent it from dragging
them while cleaning.
Remove fragile or small items from the floor to prevent the robot from bumping into
and damaging them.

2 3
ENEN
Usage Restrictions Batteries and
Charging
Safety Information Safety Information
Batteries and
Charging
Do not use any third-party battery or auto-empty base. Use only with RCS2 supply unit.
Do not attempt to disassemble, repair, or modify the battery or auto-empty base on
your own.
Do not place the auto-empty base near a heat source.
Do not use a wet cloth or wet hands to wipe or clean the base's charging contacts.
Do not improperly dispose of old batteries. Unneeded batteries should be discarded
at an appropriate recycling facility.
If the robot will not be used for an extended period, fully charge it, then turn it off
and store in a cool, dry place. Recharge the robot at least once every 3 months to
avoid over-discharging the battery.
This product contains batteries that can only be replaced by qualified technicians or
after-sales service.
Keep hair, fingers, and other body parts away from the suction opening of the
robots.
To prevent damage or harm from dragging, clear any loose objects from the floor
and remove cables or power cords along the cleaning path before operating the
appliance.
Keep the brush cleaning tool out of reach of children.
Do not place children, pets, or any item on top of the robot regardless of whether it
is stationary or moving.
Do not use the robot to clean any burning objects. Do not use the robot to pick up
flammable or combustible liquids, corrosive gases, or undiluted acids or solvents.
Do not vacuum hard or sharp objects. Do not use the appliance to pick up objects
such as stones, large pieces of paper or any item that may clog the appliance.
Make sure the robot is turned off and the auto-empty base is unplugged before
cleaning or performing maintenance.
Do not use a wet cloth to wipe or any liquid to rinse the robot and auto-empty base.
Washable parts must be dried completely before installing and using them.
Make sure the robot is turned off when being transported and kept in its original
packaging if possible.
Please use this product in accordance with the instructions in the User Manual. Users
are responsible for any loss or damage that arise from improper use of this product.
Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLS6AD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
Laser Safety
Information
The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class 1
laser products. Please avoid direct eye contact with it during use.

2 3
ENEN
Usage Restrictions Batteries and
Charging
Safety Information Safety Information
Batteries and
Charging
Do not use any third-party battery or auto-empty base. Use only with RCS2 supply unit.
Do not attempt to disassemble, repair, or modify the battery or auto-empty base on
your own.
Do not place the auto-empty base near a heat source.
Do not use a wet cloth or wet hands to wipe or clean the base's charging contacts.
Do not improperly dispose of old batteries. Unneeded batteries should be discarded
at an appropriate recycling facility.
If the robot will not be used for an extended period, fully charge it, then turn it off
and store in a cool, dry place. Recharge the robot at least once every 3 months to
avoid over-discharging the battery.
This product contains batteries that can only be replaced by qualified technicians or
after-sales service.
Keep hair, fingers, and other body parts away from the suction opening of the
robots.
To prevent damage or harm from dragging, clear any loose objects from the floor
and remove cables or power cords along the cleaning path before operating the
appliance.
Keep the brush cleaning tool out of reach of children.
Do not place children, pets, or any item on top of the robot regardless of whether it
is stationary or moving.
Do not use the robot to clean any burning objects. Do not use the robot to pick up
flammable or combustible liquids, corrosive gases, or undiluted acids or solvents.
Do not vacuum hard or sharp objects. Do not use the appliance to pick up objects
such as stones, large pieces of paper or any item that may clog the appliance.
Make sure the robot is turned off and the auto-empty base is unplugged before
cleaning or performing maintenance.
Do not use a wet cloth to wipe or any liquid to rinse the robot and auto-empty base.
Washable parts must be dried completely before installing and using them.
Make sure the robot is turned off when being transported and kept in its original
packaging if possible.
Please use this product in accordance with the instructions in the User Manual. Users
are responsible for any loss or damage that arise from improper use of this product.
Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLS6AD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
Laser Safety
Information
The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class 1
laser products. Please avoid direct eye contact with it during use.

4 5
ENEN
Accessories
Product Overview
Robot
Product Overview
Spot Cleaning Button
· Press briefly to start spot cleaning
Power/Clean Button
· Press and hold for 3 seconds to turn on or o
· Press briefly to start cleaning after the robot is turned on
Dock Button
· Press to send the robot back to the base
· Press and hold for 3 seconds to disable Child Lock
Status Indicator
· Solid White: Cleaning or cleanup is completed
· Blinking Orange: Error
· Solid Blue: Camera monitoring enabled
Water Tank
Side BrushCleaning Tool Power Cord
Mop Pad Dust Collection Bag
(replacement)
Auto-Empty Base

4 5
ENEN
Accessories
Product Overview
Robot
Product Overview
Spot Cleaning Button
· Press briefly to start spot cleaning
Power/Clean Button
· Press and hold for 3 seconds to turn on or o
· Press briefly to start cleaning after the robot is turned on
Dock Button
· Press to send the robot back to the base
· Press and hold for 3 seconds to disable Child Lock
Status Indicator
· Solid White: Cleaning or cleanup is completed
· Blinking Orange: Error
· Solid Blue: Camera monitoring enabled
Water Tank
Side BrushCleaning Tool Power Cord
Mop Pad Dust Collection Bag
(replacement)
Auto-Empty Base

6 7
ENEN
Robot
Robot Sensors
Product Overview Product Overview
Reset Button
·
Cover
Wi-Fi Indicator
Cleaning Tool
Air Outlet/Speaker
Laser Distance Sensor (LDS)
Bumper
AI Visual Sensor
Cli Sensors
Main Wheels
Main Brush
Charging Contacts
Brush Guard Clips
Auto-empty Vents
Universal Wheel
Side Brush
Press and hold for 3 seconds
to restore the robot to factory
settings
Auto-Empty Base Open the upper cover
Bottom
Back
Dust Collection
Bag Slot
Air Duct Cover
Mounting Screw
Filter
Cord Storage Slot
Power Cord Socket
Upper Cover
Dust Cabinet
Status Indicator
•White: The base is plugged in
• Breathing White: Robot is charging
• Blinking Orange: The base has an error
Signaling Area
Charging Contacts
Auto-empty Vents

6 7
ENEN
Robot
Robot Sensors
Product Overview Product Overview
Reset Button
·
Cover
Wi-Fi Indicator
Cleaning Tool
Air Outlet/Speaker
Laser Distance Sensor (LDS)
Bumper
AI Visual Sensor
Cli Sensors
Main Wheels
Main Brush
Charging Contacts
Brush Guard Clips
Auto-empty Vents
Universal Wheel
Side Brush
Press and hold for 3 seconds
to restore the robot to factory
settings
Auto-Empty Base Open the upper cover
Bottom
Back
Dust Collection
Bag Slot
Air Duct Cover
Mounting Screw
Filter
Cord Storage Slot
Power Cord Socket
Upper Cover
Dust Cabinet
Status Indicator
•White: The base is plugged in
• Breathing White: Robot is charging
• Blinking Orange: The base has an error
Signaling Area
Charging Contacts
Auto-empty Vents

8 9
ENEN
Dust Bin Mopping Module
Dust Collection Bag
Product Overview Preparing Your Home
Tidy up items such as power cords, cloths, slippers, and toys to
improve the eciency of the robot.
Open the door of the room to be cleaned, and put the furniture in
its proper place to leave more space.
With the AI visual sensor, the robot can better recognize and
avoid obstacles such as power cords, shoes, and socks. For best
performance, make sure that all areas to be cleaned are well-lit.
Before cleaning, place a physical barrier at the edge of the stairs
and sofa to ensure smooth operation.
When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
To prevent the robot from not recognizing areas that need to be cleaned, do not stand in front of the robot, threshold, hallway, or narrow places.
Note:
Filter
Auto-empty Vents
Bin Cover Release Clip
Bin Clip
Dust Collection Bag Handle
Note: Due to the factory setting, a new dust collection bag has been installed inside
already.
Water Tank
Water Inlet
Attaching Area
Water Tank Release Clip
Mop Pad

8 9
ENEN
Dust Bin Mopping Module
Dust Collection Bag
Product Overview Preparing Your Home
Tidy up items such as power cords, cloths, slippers, and toys to
improve the eciency of the robot.
Open the door of the room to be cleaned, and put the furniture in
its proper place to leave more space.
With the AI visual sensor, the robot can better recognize and
avoid obstacles such as power cords, shoes, and socks. For best
performance, make sure that all areas to be cleaned are well-lit.
Before cleaning, place a physical barrier at the edge of the stairs
and sofa to ensure smooth operation.
When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
To prevent the robot from not recognizing areas that need to be cleaned, do not stand in front of the robot, threshold, hallway, or narrow places.
Note:
Filter
Auto-empty Vents
Bin Cover Release Clip
Bin Clip
Dust Collection Bag Handle
Note: Due to the factory setting, a new dust collection bag has been installed inside
already.
Water Tank
Water Inlet
Attaching Area
Water Tank Release Clip
Mop Pad

10 11
ENEN
1. Remove the protective strips
2. Install the side brush
Click
Before Use

Connecting with the Dreamehome App
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the
device again.
Note: Install the side brush until it clicks into place.
1.Download the Dreamehome App 3. Reset Wi-Fi
Scan the QR code on the robot, or search "Dreamehome" in the
app store to download and install the app based on your needs.
Simultaneously press and hold the buttons and until you
hear a voice say, “Waiting for the network configuration.” Once the
Wi-Fi indicator is blinking slowly, the Wi-Fi has been successfully
reset.
Wi-Fi Indicator
·
·
·
Under the
Cover
2.Add Device
Open the Dreamehome app, tap " " in the upper right, and then
scan the QR code above again to add "DreameBot D10s Plus".
Please follow the prompts to finish the Wi-Fi connection.
Only 2.4 GHz Wi-Fi networks are supported.
Due to upgrades in the app software, the actual operations may be dierent from the
statements in this manual. Please follow the instructions based on the current app
version.
Note:
3. Connect to a power outlet and start charging




Note:
Keep the immediate area 1.5 m in front of the base and 0.5 m to its both
sides clear of objects.
Make sure that no objects might block the signaling area.
Place the base on level ground against the wall and connect it to
a power outlet. Place the robot onto the base to charge. The robot
will turn on automatically and begin charging. It is recommended
to fully charge your robot before first-time use.
About the Auto-Empty Base





> 0.3 m
> 0.5 m
> 0.5 m
> 1.5 m

10 11
ENEN
1. Remove the protective strips
2. Install the side brush
Click
Before Use

Connecting with the Dreamehome App
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the
device again.
Note: Install the side brush until it clicks into place.
1.Download the Dreamehome App 3. Reset Wi-Fi
Scan the QR code on the robot, or search "Dreamehome" in the
app store to download and install the app based on your needs.
Simultaneously press and hold the buttons and until you
hear a voice say, “Waiting for the network configuration.” Once the
Wi-Fi indicator is blinking slowly, the Wi-Fi has been successfully
reset.
Wi-Fi Indicator
·
·
·
Under the
Cover
2.Add Device
Open the Dreamehome app, tap " " in the upper right, and then
scan the QR code above again to add "DreameBot D10s Plus".
Please follow the prompts to finish the Wi-Fi connection.
Only 2.4 GHz Wi-Fi networks are supported.
Due to upgrades in the app software, the actual operations may be dierent from the
statements in this manual. Please follow the instructions based on the current app
version.
Note:
3. Connect to a power outlet and start charging




Note:
Keep the immediate area 1.5 m in front of the base and 0.5 m to its both
sides clear of objects.
Make sure that no objects might block the signaling area.
Place the base on level ground against the wall and connect it to
a power outlet. Place the robot onto the base to charge. The robot
will turn on automatically and begin charging. It is recommended
to fully charge your robot before first-time use.
About the Auto-Empty Base





> 0.3 m
> 0.5 m
> 0.5 m
> 1.5 m

12 13
ENEN
1. Fast Mapping
How to Use
After configuring the network for the first time, follow the
instructions on the app to quickly create a map. The robot will
start mapping without cleaning. When the robot returns to the
base, the mapping process has been completed and the map will
be saved automatically.
2. Turn On/Of
Press and hold the button for 3 seconds to turn on the robot.
The power indicator should be illuminated. Place the robot onto
the base. The robot should turn on automatically and begin
charging. To turn o the robot, move the robot away from the
base and press and hold the button for 3 seconds.
4. Pause/Sleep
When the robot is running, press any button to pause it. If the
robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn o. Press any
button on the robot, or use the app to wake up the robot.
The robot will turn o automatically if left in Sleep Mode for more than 12 hours.
If the robot is paused and placed onto the base, the current cleaning task will end.
Note:
3. Start Cleaning
Press the button briefly to start cleaning after the robot is
turned on. The robot will accurately map out a route, methodically
clean along the edges and walls, then finish by cleaning each
room in an S-shaped pattern to ensure a thorough job.
5. Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot
will be prevented from resuming cleaning and the power indicator
goes out. The DND mode is disabled by default at the factory.
You can use the app to enable the DND mode or modify the DND
period. The DND period is 22:00-8:00 by default.
The scheduled cleaning tasks will be performed on time during the DND period.
The robot will resume cleanup where it left o after the DND period expires.
Note:
6. Spot Cleaning
When the robot is on standby, press briefly the button to enable
the spot cleaning mode. In this mode, the robot cleans a square-
shaped area of 1.5 × 1.5 meters around it and returns to its starting
point once the spot cleaning is completed.
7. Scheduled Cleaning
How to Use
You can schedule cleaning time in the Dreamehome app. The robot
will automatically start cleaning at the designated time and then
return to the base to recharge when the cleaning is done.
8. Additional App Functions
Follow the instructions on the app interface to use more functions.
The version of the app might have been updated. Please follow
the instructions based on the current app version.
9. Use the Mopping Function
It is recommended that all floors are vacuumed at least three
times before the first mopping session to achieve a better cleaning
eect.
1) Dampen the mop pad and wring out excess water. Install the
mop pad as shown in the diagram.
2) Fill the tank with water.
Do not use detergent or disinfectant.
Do not fill the water tank with hot water as this may cause the water tank to warp.
Note:
It is not recommended to use the mopping function on carpets.
Use the app to adjust the water flow as required.
Note:
3) Align the mopping module as indicated by the arrow, then
slide it into the back of the robot until it clicks into place. Press the
button or use the Dreamehome app to start cleaning.
Click
Click

12 13
ENEN
1. Fast Mapping
How to Use
After configuring the network for the first time, follow the
instructions on the app to quickly create a map. The robot will
start mapping without cleaning. When the robot returns to the
base, the mapping process has been completed and the map will
be saved automatically.
2. Turn On/Of
Press and hold the button for 3 seconds to turn on the robot.
The power indicator should be illuminated. Place the robot onto
the base. The robot should turn on automatically and begin
charging. To turn o the robot, move the robot away from the
base and press and hold the button for 3 seconds.
4. Pause/Sleep
When the robot is running, press any button to pause it. If the
robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn o. Press any
button on the robot, or use the app to wake up the robot.
The robot will turn o automatically if left in Sleep Mode for more than 12 hours.
If the robot is paused and placed onto the base, the current cleaning task will end.
Note:
3. Start Cleaning
Press the button briefly to start cleaning after the robot is
turned on. The robot will accurately map out a route, methodically
clean along the edges and walls, then finish by cleaning each
room in an S-shaped pattern to ensure a thorough job.
5. Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot
will be prevented from resuming cleaning and the power indicator
goes out. The DND mode is disabled by default at the factory.
You can use the app to enable the DND mode or modify the DND
period. The DND period is 22:00-8:00 by default.
The scheduled cleaning tasks will be performed on time during the DND period.
The robot will resume cleanup where it left o after the DND period expires.
Note:
6. Spot Cleaning
When the robot is on standby, press briefly the button to enable
the spot cleaning mode. In this mode, the robot cleans a square-
shaped area of 1.5 × 1.5 meters around it and returns to its starting
point once the spot cleaning is completed.
7. Scheduled Cleaning
How to Use
You can schedule cleaning time in the Dreamehome app. The robot
will automatically start cleaning at the designated time and then
return to the base to recharge when the cleaning is done.
8. Additional App Functions
Follow the instructions on the app interface to use more functions.
The version of the app might have been updated. Please follow
the instructions based on the current app version.
9. Use the Mopping Function
It is recommended that all floors are vacuumed at least three
times before the first mopping session to achieve a better cleaning
eect.
1) Dampen the mop pad and wring out excess water. Install the
mop pad as shown in the diagram.
2) Fill the tank with water.
Do not use detergent or disinfectant.
Do not fill the water tank with hot water as this may cause the water tank to warp.
Note:
It is not recommended to use the mopping function on carpets.
Use the app to adjust the water flow as required.
Note:
3) Align the mopping module as indicated by the arrow, then
slide it into the back of the robot until it clicks into place. Press the
button or use the Dreamehome app to start cleaning.
Click
Click

14 15
ENEN Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Part Maintenance
Frequency Replacement Period
Mop pad After each use Every 3 to 6 months
Main brush
Once every 2 weeks
Every 6 to 12 months
Dust bin filter
Every 3 to 6 months
Side brush
Auto-empty base's
signaling area
Once every month /
Charging contacts
Auto-empty vent
Universal wheel
Laser Distance
Sensor (LDS)
AI visual sensor
Cli sensors
Water tank
Clean it as needed /
Dust bin
Dust collection bag / 8-10 weeks
Note: The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
3. Clean the auto-empty vent.
Routine Maintenance
4. Remove the filter and tap its basket gently.
5. Rinse the dust bin and filter with water and dry them completely
before reinstalling.
Note: Do not attempt to clean the filter with a brush, finger, or any sharp objects so as to
avoid damaging it.
Rinse the dust bin and filter with clean water only. Do not use any detergent.
Use the dust bin and filter only when they are completely dry.
Note:
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove
the mopping module, and then pull the mop pad o the mopping
module.
2. Pour out the water in the tank. Clean with water only and leave
to air dry before re-installing.
Note: Do not directly expose the water tank to sunlight.
12
6
111
57
210
48
39 24 hrs

14 15
ENEN Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Part Maintenance
Frequency Replacement Period
Mop pad After each use Every 3 to 6 months
Main brush
Once every 2 weeks
Every 6 to 12 months
Dust bin filter
Every 3 to 6 months
Side brush
Auto-empty base's
signaling area
Once every month /
Charging contacts
Auto-empty vent
Universal wheel
Laser Distance
Sensor (LDS)
AI visual sensor
Cli sensors
Water tank
Clean it as needed /
Dust bin
Dust collection bag / 8-10 weeks
Note: The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
3. Clean the auto-empty vent.
Routine Maintenance
4. Remove the filter and tap its basket gently.
5. Rinse the dust bin and filter with water and dry them completely
before reinstalling.
Note: Do not attempt to clean the filter with a brush, finger, or any sharp objects so as to
avoid damaging it.
Rinse the dust bin and filter with clean water only. Do not use any detergent.
Use the dust bin and filter only when they are completely dry.
Note:
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove
the mopping module, and then pull the mop pad o the mopping
module.
2. Pour out the water in the tank. Clean with water only and leave
to air dry before re-installing.
Note: Do not directly expose the water tank to sunlight.
12
6
111
57
210
48
39 24 hrs

16 17
ENEN Routine Maintenance
3. Clean the mop pad with water only and leave it to air dry before
re-installing.
4. If the water flows too slowly or the outflow is not well-distributed,
please clean the air hole on the cover of the water tank.
Remove the pad from the mopping module before cleaning it. Make sure dirty water
does not flow back into the water outlet to avoid clogging.
Note:
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush guard
and lift the brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush too vigorously. Doing so may
damage the brush.
12
6
111
57
210
48
39 24 hrs
Clean the Side Brush
Clean the Main Wheel / Universal Wheel
Routine Maintenance


Note: Use a tool such as a small screwdriver to separate the axle and tire of the universal
wheel.

16 17
ENEN Routine Maintenance
3. Clean the mop pad with water only and leave it to air dry before
re-installing.
4. If the water flows too slowly or the outflow is not well-distributed,
please clean the air hole on the cover of the water tank.
Remove the pad from the mopping module before cleaning it. Make sure dirty water
does not flow back into the water outlet to avoid clogging.
Note:
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush guard
and lift the brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush too vigorously. Doing so may
damage the brush.
12
6
111
57
210
48
39 24 hrs
Clean the Side Brush
Clean the Main Wheel / Universal Wheel
Routine Maintenance


Note: Use a tool such as a small screwdriver to separate the axle and tire of the universal
wheel.

18 19
ENEN
Clean the Charging Contacts and Auto-empty Vents
Routine Maintenance
Replace the Dust Collection Bag
Routine Maintenance
According to the status indicator (blinking orange) and app prompts, replace the dust collection bag with a new one when it is full.
1. Discard the dust collection bag. 3. Install a new dust collection bag.
2. Wipe the filter with a dry cloth.
4. Close the upper cover of auto-empty base.
Note: When taking out the collection bag, close the bag handle to avoid dust
leaking out.
Note: Do not close the base forcefully if the upper cover cannot be closed or
the dust collection bag is not installed.
Clean the LDS Laser
Sensor
Clean the AI Visual Sensor
Clean the Cli Sensor
Note: Wet cloths can damage sensitive elements within the robot and base. Please use dry rags for cleaning.