DSE 8680 User manual

DEEP SEA EL ECT R O N I C S
8680
INST ALLATION INSTRUCTIONS
ACCESSING THE ‘RUNNING’ CONFIGURATION EDITOR
•The ‘running’ editor can be entered while either bus is live
. All protections remain
active if either bus is live while the running editor is entered.
•Press and hold the button to enter the running editor
EDITING A PARAMETER
•Enter the editor as described above.
•Press the up or down buttons to select the
parameter you wish to view/change
within the currently selected section.
•To edit the parameter, press
to enter edit mode. The parameter begins to
flash to indicate that you are editing the value.
•Press the up or down buttons to change the parameter to
the required value.
•Press
to save the value. The parameter ceases flashing to indicate that it has
been saved.
•To exit the editor at any time, press and hold the button.
ADJUSTABLE PARAMETERS (Running editor)
Running Editor
Section Parameter as shown on display
Factory Settings
DISPLAY
DISPLAYDISPLAY
DISPLAY
Contrast
53%
Language
English
Page Timer
5m
Scroll Timer
2
DIMENSIONS
240.0 mm x 181.1 mm x 41.7 mm (9.4 ” x 7.1
” x 1.6
PANEL CUTOUT
:
220 mm x 160 mm (8.7 ” x 6.3 ”)
Deep Sea Electronics Plc.
Tel:[phone]
Fax: [phone]
Email: [email protected]
Web: www.deepseaplc.com
Deep Sea Electronics inc.
Tel
: +1 (815) 316
Fax: [phone]
TOLL FREE (USA only) :
Telephone
: 1 866 636 9703
Email: support
@deepseausa.com
Web: www.deepseausa.com
DEE P S EA EL ECT R O N I C S
INST ALLATION INSTRUCTIONS
053-082
ISSUE 1
ACCESSING THE ‘RUNNING’ CONFIGURATION EDITOR
. All protections remain
parameter you wish to view/change
to enter edit mode. The parameter begins to
the required value.
to save the value. The parameter ceases flashing to indicate that it has
Factory Settings
53%
English
5m
2
s
” x 1.6
”)
Deep Sea Electronics inc.
: +1 (815) 316
-8706
Fax: [phone]
- 8708
TOLL FREE (USA only) :
: 1 866 636 9703
@deepseausa.com
Web: www.deepseausa.com

TYPICAL WIRING DIAGRAM
A larger version of this diagram can be found in the product manual.