Dunlop Authentic Hendrix 68 Shrine Series User manual

This special edition of the Band of Gypsys Fuzz
pays tribute to the legendary Jimi Hendrix with a
custom nish that remixes prolic and celebrated
rock artist John Van Hamserveld’s famous 1968
Shrine Auditorium concert poster art. Packed into
an MXR mini housing, this pedal is based on a
mysterious Fuzz Face Distortion that Jimi Hendrix
used at several iconic shows between 1969 and
1970, most notably the historic Band of Gypsys
performance. Red with white knobs, this particular
fuzz sounded like a completely different animal
from any of the other Fuzz Face pedals in his
arsenal, snarling with an aggressive, biting tone.
JHMS4
jimdunlop.com/jhms4
Authentic Hendrix
‘68 Shrine Series
Band of Gypsys
Fuzz Face Distortion
™
™
®

JHMS4 | AUTHENTIC HENDRIX™’68 SHRINE SERIES BAND OF GYPSYS® FUZZ 2
1OUTPUT knob controls overall volume of effect
2TONE knob shapes EQ of effect
3FUZZ knob controls intensity of fuzz effect
4FOOTSWITCH toggles effect on/bypass (blue LED indicates on)
13
2
4
External Controls

JHMS4 | AUTHENTIC HENDRIX™’68 SHRINE SERIES BAND OF GYPSYS® FUZZ 3
Authentic Hendrix™’68 Shrine Series Band of Gypsys®
Fuzz is powered by the Dunlop ECB003 9-volt adapter
or an MXR®Brick™Series power supply (each sold
separately). This pedal cannot be powered by a battery.
Power
1 Run a cable from your guitar to JHMS4’s INPUT jack and
another cable from JHMS4’s OUTPUT jack to your amplifier.
2 Start with OUTPUT, TONE, and FUZZ controls at 12 o’clock.
3 Turn effect on by depressing the footswitch.
4 Rotate VOLUME knob clockwise to increase overall volume
or counterclockwise to decrease it.
5 Rotate TONE knob clockwise to for a brighter sound or
counterclockwise for a warmer sound.
6 Rotate FUZZ knob clockwise to increase the amount of
fuzz or counterclockwise to decrease it.
Directions
Basic Operation

JHMS4 | AUTHENTIC HENDRIX™’68 SHRINE SERIES BAND OF GYPSYS® FUZZ 4
Specifications
Input Impedance 30 kΩ
Output Impedance
Max Volume 33 kΩ
Mid Volume 80 kΩ
Noise Floor* -83 dBV
Bypass True Hardwire
Current Draw 4.3 mA
Power Supply 9 volts DC