Dunlop GCB95F Cry Baby User manual

THE ORIGINAL SINCE 1967
92503002657REVC
®

POWER
The Cry Baby®Classic Wah Wah is
powered by one 9-volt battery (accessed
via the bottom of the pedal), an AC
adapter such as the Dunlop ECB003/
ECB003E, or a DC Brick™power supply.
SETUP INSTRUCTIONS
•Runaninstrumentcablefromyourguitar
totheGCB95F’sINSTRUMENTjackand
run another instrument cable from the
GCB95F’sAMPLIFIERjacktoyouramp.
•Toturnthepedalon/off,pushthetoeof
the pedal down until you feel a “click.”
•Byrockingyourfootbackandforth
onthepedal,youcanchangethe
effect that the Classic Cry Baby Wah
Wah has on the tone of your instrument
instantaneously.
SPECIFICATIONS
Impedance
Input 1MΩ
Output 1 kΩ
Noise Floor* -102 dBV
Bypass Hardwire
Current Draw 2.5 mA
PowerSupply 9voltsDC
*A-weighted
GCB95F CRy BABy® CLASSIC WAH WAH