Dura Trel Elmwood Trellis 11190 User manual

Model# 11190 (M)
Part # Description
1
2" sq. x 74" Left Post
2 2" sq. x 74" Right Post
3⅞ x 1½ x 22" Top/Bottom Cross Rail
4 ¼ x 1½ x 22" Horizontal Slat
5 ¼ x 1½ x 66" Vertical Slat
6 2 x 2 x 16" Ground Anchors
7 Hardware Bag (includes:)
2" sq." Post Cap
1¼" Painted Screw
1" Painted Self Tapping Screw
(for ground anchors)
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
IMPORTANT: Check boxes for Contents Listed
Check inside of parts as some parts are packaged
inside of others
In the event of missing, damaged or defective parts
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
…
Battery or Electric Drill with #2 phillips bit
…PVC, Super, or Crazy Glue
…
Hammer or Rubber Mallet (recommended)
115 Vision Parkway
P.O. Box 122
Sheboygan Falls, WI 53085
Assembly Instructions
2
Elmwood Trellis
7
2
1
2
Qty
1
4
1
2
General Information
4
www.dura-trel.com
[e-mail]
Tools Required
1-877-258-6020
1

115 Vision Parkway
P.O. Box 122
Sheboygan Falls, WI 53085
1-877-258-6020
2
www.dura-trel.com
[e-mail]
Please call manufacturer direct with questions concerning missing or defective parts at Toll Free:
877
-258-6020.
Dura
-trel,
Inc. products are warranted to be free from manufacturing defects resulting in delaminating,
peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the
PVC to change to its natural color for a period of 20 years from the date of purchase.
Normal weathering is defined as exposure to sunlight and extremes of weather and atmosphere which
will cause any colored surface to gradually fade.
CONDITIONS NOT COVERED BY THIS WARRANTY:
A. Physical abuse, misuse, neglect, or improper storage.
B. Improper installation or installation not in strict adherence to the instructions written by Dura
-Trel,
Inc.
C. This warranty does not apply if materials are painted, varnished, or coated with any substance.
D. Dura
-Trel, Inc. is not responsible for damages to product during shipping.
E. Damage attributable to atmospheric pollutants, hail, lightning, hurricane, tornado, wind borne
objects, earthquake, fire, mildew, casualty, act of God, building or ground settlement, or subjection to
stress or weight.
CLAIMS AND REMEDIES:
If a Dura
-Trel, Inc. product is determined to have a manufacturing defect which is covered by this
warranty, Dura
-Trel, Inc. will replace the material containing the defect (labor not included) F.O.B from
the point of manufacture. Dura
-trel, Inc. will not be responsible for any cost incurred in the removal or
reinstallation of the product.
Important:
An claims must be sent to the following address and should describe the defect claim.
Dura-Trel, Inc., P.O. Box 122, Sheboygan Falls, WI 53085
Dura
-Trel, Inc. reserves the right to discontinue or change its design, and or color. If the original color
or style is not available, Dura
-Trel, Inc. shall have the right to substitute a product designated by Dura-
Trel, Inc.
Dura
-
Trel, Inc. shall not be liable for any incidental, special, or consequential damages arising out of the
use of these products
Warranty Statement
20 Year Guarantee

Elmwood Trellis
3
Lay out one 74" left post (part 1). Starting at bottom, insert one 22" top/bottom cross rail (part 3) and seven 22"
horizontal slat (part 4). Insert free ends of bottom cross rail and horizontal slats into 74" right post (part 2).
Weave one 66" vertical slat (part 5) through horizontal slats. Insert end into left hole of bottom cross rail.
Weave remaining 66" vertical slat (part 5) through horizontal slats opposite of left vertical slat. Insert end into right
hole of bottom cross rail.
Separate tops of posts just enough to insert remaining 22" top/bottom cross rail (part 3) into top routed hole of
each post.
Using two 1¼" screws per post, fasten together trellis. Be sure all parts are fully inserted into posts before
fastening.
Using PVC, super or crazy glue; glue post caps onto posts.

Elmwood Trellis
4
Weave remaining 66" vertical slat (part 5) through horizontal slats opposite of left vertical slat. Insert end into right
Option 1 (soft ground)
Slide one 16 inch ground anchor into bottom of each post. Slide ground anchor up to bottom cross rail. Using
two 1 inch self
-tapping screws per post, screw the post to the ground anchor (figure 1). When fastening, use
one screw on each opposite side as shown in the drawing. Once ground anchors are attached to posts, push
trellis/arbor into ground. This method can also be used for installation into hard ground if area thourougly
drenched with water.
Option 2
(hard ground)
Measure
distances between posts and mark ground accordingly. Pound 16 inch ground anchor into ground
according to measurements and basic layout (figure 2), leaving about 4 inches of ground anchor exposed.
When pounding into ground, use a block of wood to prevent ground anchor from cracking.
Slide trellis/arbor over ground anchors.
Using two 1" self-tapping screws per post, screw the post to the
ground anchor (figure 1). When fastening, use one screw on each opposite side as shown in the drawing.
Option 3
(permanent installation)
Measure distances between posts and mark ground accordingly. Dig holes 12 inches according to
measurements and basic layout (figure 2). Fill with cement and place 16 inch ground anchor in wet cement.
Be sure that ground anchors are straight and in accordance with measurements of trellis/arbor posts. Allow
cement to dry. NOTE: There is very little room for error with this installation method.
Slide trellis/arbor over ground anchors. Using two 1" self
-tapping screws per post, screw the post to the
ground anchor (figure 1). When fastening, use one screw on each opposite side as shown in the drawing.
Figure 1
Figure 2
Trellis
Arbor