Durafit SPARK DFIHB003 Instruction Manual

DURAFIT SPARK (DFIHB003)
Motorized Treadmill
OPERATING INSTRUCTION MANUAL
Special tips:
1. Before installation and operation, please read this operation manual carefully.
2. Please save this manual for future reference.

-1-
Table of Contents
1Brief Desc ription „„„„„„„„„„„„„„„„„„„„„„„„„ 2
2Main Technical F eature s „„„„„„„„„„„„„„„„„„„„„„„ 2
3T ips for safety „„„„„„„„„„„„„„„„„„„„„„„„„„ 3-4
4Installation „„„„„„„„„„„„„„„„„„„„„„„„„„„„ 4
5 Use and Op eration „„„„„„„„„„„„„„„„„„„„„„„„ 4-6
6Maintenance „„„„„„„„„„„„„„„„„„„„„„„„„„ 6-8
7Guide s for malfunction „„„„„„„„„„„„„„„„„„„„„„ 8-9
8Warranty „„„„„„„„„„„„„„„„„„„„„„„„„„„„ 9
9Error and s elf-inspection „„„„„„„„„„„„„„„„„„„„„„ 9-10
10 Installation S ketch „„„„„„„„„„„„„„„„„„„„„„„ 11-12

-2-
1. Brief Description
DFIHB003 motorized treadmill (diagram 1) can help complete your goal of keeping fit
together with unique and elegant appearance. Easily read panel parameter。Easily operated folding
system realizes space-saving. Auto speed range 1-12km/h. All makes it a hot home use fitness
equipment.
Meter accessories
Heart rate sensor
Handle
Pillar accessories
Safety key
Footplate
Power switch
Running belt
Running belt adjustor
Diagram 1: Motorized Treadmill
2. Main Technical FeaturesE
Main use: Body and beauty building
This treadmill is for home use
Panel displays speed, time, distance, heart rate, calorie etc.
Display mode: 3.5’ LCD
Input voltage: 220V
Frequency: 50/60Hz
Input current: ≤8A
Temperature for working: 0∽40℃
Speed range: 1∽12km/h

-3-
Program: Time display range:0:00∽99:59(minute : second);
Distance display range:0.1~99.99kms
Machine size (L*W*H):：1350x672x1100（mm）
N/W：35KG；
3. Tips for Safety
3.1 Insert the power plug into the socket directly. Current load should be less than 10A.
3.2 The constant running time is less than 2 hours, max weight is less than 100kgs.
3.3 Place your treadmill on the clean floor，not on the thick carpet, otherwise it will not convenient
for ventilation. Also please don’t put the treadmill in the moist place or outdoors; If there is
something wrong with the electrical wire, please replace it with the electrical wire provided by our
company. For the replacement, please contact with the local distributor.
3.4 The treadmill should be placed in the convenient position for electric socket.
3.5 The freshman should grip the handrails when jogging and running until familiarly. Pleasedon’t
stand on the running belt, after the machine is power on (the safe key is at the appointed
position).Please stand on the footplates besides the treadmill, press the “start” button, it runs at the
lowest speed, at this time you can run on the belt.
3.6 While running, you should dress properly. Don’t dress too loosely in case your clothes are
entangled by the machine .And please wear sport shoes with soft sole.
3.7 Before taking down the protecting cover of the treadmill, please keep the machine is power off.
3.8 Don’t let children and non-sporters get close to the running treadmill to avoid unnecessary
injury.
3.9 Please make sure one end of the safe key has been placed in the appointed position and the
other one has been nipped to your clothes when you are running on the machine. In this way, you
can pull the safe key for the machine’s sudden stop under the dangerous condition. Then you will
not be injured.
3.10 If you are enjoying other entertainment while running such as watching TV, reading. Please
be particularly careful. These activities will distract your attention, which may make you lose your
balance and get hurt.
3.11 Please pull the plug off from socket and keep the safe key, when the treadmill is unused.
3.12 Please don’t put anything under treadmill and don’t let your children play near it after
folding.

-4-
（3）speed-up
（2）speed-down
（9）Speed shortcut key
（8）Speed shortcut key
（4）Mode
（1）Prog
（5）start
（7）stop
3.13 Please consult your doctor at first before running, if you have one of the following diseases.
a) Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking, and other
chronic diseases, complication disease.
b) If you are over 35 years old and heavier than common weight.
c) Women in pregnant or in breasting period.
3.14 Please stop exercising immediately and consult your doctor if you’re feel giddy, surfeit,
thorax ache or other symptoms.
3.15 Please drink adequate water after taking exercises on our treadmill for more than 20 minutes.
4. Installation: See “ Installation sketch ”
5. Use and Operation
5.1 Panel Keys and Function
（6）safety key

- 10 -
（1） “PROG”(could be pressed continuously to your expected mode)
Press the “PROG” key once again to enter “12 direct selected programs” there are 12
programs, “P1-P12”.
12 programmes
BLUE = SPEED
PROGRAMME 1
PROGRAMME 7
PROGRAMME 2
PROGRAMME 8
PROGRAMME 3
PROGRAMME 9
PROGRAMME 4
PROGRAMME 10
PROGRAMME 5
PROGRAMME 11
PROGRAMME 6
PROGRAMME 12
（2） “speed down”
Under running condition, press this key, speed can be speeded down to the one you need.
（3） “speed up”
Under running condition, press this key, speed can be speeded up to the one you need.
（4） “Mode
Under ready condition, press this key to countdown running way 。The first way of countdown
is calculated by time .you could adjust the countdown time by press “speed+”or “speed-”;if you
press “mode”key again,then it goes to distance countdown way,we also could press “speed+”or
“speed-”to adjust the countdown distance ,finally if you don’t like the above two way ,you also
could press the”mode” key again,then it finally goes to the calorie countdown way. You could
press the “speed+”and “speed -” to adjust your expected calorie to start the final count down. No
matter which countdown way is your choice,after you choose one way,then press the “start/stop”
key you just could enter this way to start your running.
If you don’t use the countdown running way,you could press the “mode”key four times one by

- 10 -
one,then it will enter into the body fat evaluating way,
（5） “start”
Under ready condition, press this key, it runs at the speed of 1.0km/h.
（6） “safety key”
Under urgent condition, pull this key, machine stops immediately.
(7) “stop”
Under running condition, press this key, if it runs at speed more than 3.5km/h, it will slow
down then stop. During this stopping process, other keys are not available. If it runs at speed less
than 3km/h, then it stops immediately.
（8） “speed short cut key”
Press this key, the speed goes directly to the chosen height.
（9） “speed short cut key”
Press this key, the speed goes directly to the chosen height.
5.2 Unload operating
1. Insert power plug into the socket with earth wire, turn the switch to “1” position which is on the
frame
2. Put the safe key in the right position, then circuit is on, press “on/off”, keep it run in unload
condition. Test the condition of running belt (testing from low speed to high ones), after testing,
press “on/off”.
3. If everything is ok, then start to run.
5.3 Meter operating instruction
5.3.1
1. Insert power plug into the socket with earth wire, turn the switch to “1” position which is on the
frame. Place the safe key to the appointed position. After a few seconds, panel will show that the
machine is ready.
2. Nip another end of safe key to your clothes, and stand on the footplate on both sides.
3. Press“start/stop” key, running belt moves at the lowest speed (1.0km/h). Speed windows will
display your running speed.
4. Start to run.
5. Press speed key to adjust speed, speed window will display your speed .
6. To end your exercise in a safe way, please first press “start/stop” key to close the treadmill.
Please leave the running belt until it stops slowly. Turn off the power.
5.3.2 Heart Rate Testing
Our treadmill can test your heart rate via the heart rate sensor. The data is only for reference.

- 10 -
6. Maintenance
6.1 Identification ways for the degree of tightness of running belt and poly V-belt.
When the running belt skips, please follow the steps as follows to make sure which belt
needs to be adjusted, running belt or poly V-belt.
a) Cut off power, screw off the bolt on cover of protection. Then take down the protecting cover
from the treadmill
b) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
make the running belt stop. If running belt stops, together with the front roll, but the motor still
runs, under this condition, it means the poly V-belt needs to be adjusted.
c) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
make the running belt stop. If running belt stops, but front roll still runs, under this condition, it
means the running belt needs to be adjusted.
6.2 The adjustment steps for poly V-belt
Cut off power firstly and take down the cover of protection.
a) Loosen the four screws for the motor, adjust them in a circuit clockwise, then screw down the
loose screws.
b) Keep the power on, and adjust the poly V-belt is loose or not following the point 3.1 above, if
yes, please repeat the action same to point a) above.
6.3
Adjustment steps for running belt
a) Turn the speed to be 5.6km/h. for running
b) Turn the bolts at both right and left sides to be half a circuit or a circuit by the 8mm spanner.
( diagram1 and diagram 2)
c) After adjustment, running belt still skips, please repeat the steps above.
Tighten the running belt(diagram 1) loosen the running belt(diagram 2)
6.4 The adjustment steps for running belt deflection
The running belt will be deflected more or less under using. Then it needs to be adjusted. The
steps are as follows:
a) Place the treadmill on a horizontal floor, turn the speed to be 5.6km/h.for running.
b) If the running belt is deflected to the right, adjust the bolt on the right by turning it for half an
circle clockwise, then adjust the bolt on the left by turning it for half an circle.(see diagram 3)
c) If the running belt is deflected to the left, adjust the bolt on the left by turning it for half an
circle clockwise, then adjust the bolt on the right by turning it for half an circle.(see diagram 4

- 10 -
d) After the adjustment, the running belt still keeps deflecting , please repeat the steps above.
running belt deflected to right running belt deflected to left
The adjustment for right deflection ( diagram 3) The adjustment for left deflection
( diagram 4)
6.5 Running board lubrication
The treadmill is equipped with lubricated running board, which needs constant maintenance.
The friction between running board and running belt has a great effect on the treadmills’ e life. So
please lubricate your machine termly. The steps are as follows:
a) Cut off the power
b) Wipe out the dust between running board and running belt with a clean cloth.
c) Daubing the Silicon oil on the running board and running belt equably.
d) While adding lubrication oil, please keep your clothes away from the machine for avoiding the
injury.
6.6 Cleaning
a) Please power off and pull the plug cap out before cleaning.
b) Wipe out the dust stuck on the surface and running board frequently.
c) Please clean the surface of frame and running belt with a soft cloth dipped with suds, don’t use
things like eradicator and naphtha.(After cleaning, please dry it for use)
d) Please take the protecting cover off every two month, use vacuum dust-collector to suck the dust
remaining inside of the protecting cover.(The dust will make the components of circuitry board
short circuit )
6.7 Cautions, folding, depositing
6.7.1 Cautions
Please make sure that the plug cap has been pulled out before cleaning or maintenance.
6.7.2 Depositng
The treadmill should be deposited indoor in case of being damp. Water can’t be spattered and
nothing can be laid and inserted on the treadmill.
Please keep the air a little humid in winter. And please void the big static electricity, it may
disturb the operation of meters or even damage them.

- 10 -
7. Guides for malfunction
7.1 Analyzing and eliminating malfunction
Item.
Malfunction
Reasons
Solution
1
Treadmill can’t be started
The safe key isn’t in the
right position
Put the safe key in the right
position
The electrical switch is
placed to “0”
Turn the electrical switch to “1”
creepage switch is not
right
Replace creepage switch
2
Meter can’t display
The meter control line
and control panel are
unconnected
Pull the bolt out and open the
motor cover and reconnect it
Turn on the meter and reconnect
3
Heart rate can’t be displayed
The pole of heart rate
sensor is not wet enough
Wet the pole with water or liquor
for hard contact lenses
Disturbed by
electromagnetism
Stay away from
electromagnetism
4
Incline doesn’t work
The motor wire is not
well connected
Open the motor cover and
reconnect it
5
Running belt runs faster or
slower than what has been
displayed
Unadjusted
Readjust it
6
Running belt slips
Running belt is not tight
enough
Please read point 3.3 Adjustment
steps for tightening running belt
for reference
7
Running belt is deflected
The running belt is
unadjusted.
Please read point 3.4 The steps
for adjusting the deflected
running belt for reference
If you still can’t solve the problems after taking the solutions above, please contact our
Customer Care @ [email protected] or 6383151885/7806811343 to resolve the issue through
our Pan- India Service Network.
8. Warranty
8.1 We have assigned well-trained professionals at the dealers’. They are ready to serve for you at
any time. You can purchase any spare parts you need.
8.2 Condition beyond Manufacturer’s warranty:
If the product you purchase has the problems as follows, the manufacturer’s warranty is not
effective:
a) Improper operating, negligence, accident
b) Wrong adjustment of running belt and poly V-belt

- 10 -
c) Unauthorized take-down
d) Improper maintenance
9. Error and self-inspection
9.1 Error：Treadmill gives the following error code if anything wrong，please contact the
professional service people soon if it happens.

-11 -

-12 -

-13 -
Proofreading has been carefully done to the manual, if there are printing mistakes, please kindly understand. If
pictures and the real product doesn’t match, please take the product as the final and correct one.
If any improvement on function and specification, please kindly understand if you are not informed.