Durr Dental VistaScan Perio Plus User manual

EN
9000-618-167/30
*9000-618-167/30*
2010/01/134&
VistaScan Perio Plus
Installation and Operating Instructions

EN
3
Contents
Important Information
1. General .............................. 4
1.1 Note on Conformity ................ 4
1.2 General Notes .................... 4
1.3 Disposal of appliance ............. 4
1.4 Notes concerning medical
appliances ........................ 4
1.5 Notes on EMC and medical
products ......................... 5
1.6 Correct usage ..................... 5
1.7 Incorrect usage ................... 5
1.8 Connecting peripheral appliances . . . 5
1.9 Using image plates ............... 5
1.10 Using software ................... 5
2. Safety ................................ 6
2.1 General Safety Notes .............. 6
2.2 Electrical safety instructions ........ 6
3. Warnings andsymbols ................ 7
3.1 Installation and
operating Instructions .............. 7
3.2 VistaScan Perio Plus ............... 7
4. Delivery Contents .................... 8
4.1 Special accessories ............... 8
4.2 Disposable materials . . . . . . . . . . . . . . . 9
5. System requirements ................10
5.1 Monitor ......................... 10
5.2 PC system ....................... 10
6. Technical Data ......................11
6.1 VistaScan Perio Plus ..............11
6.2 Environmental conditions ......... 11
7. Functional layout .................... 12
7.1 Function of individual
components .....................13
8. Functional Description ..............14
Mounting
9. Transport and packing ............... 15
10. Moving the VistaScan Perio Plus . . . . . 15
11. Set-up .............................. 16
11.1 Room for Set-up ................16
11.2 Set-up alternatives ...............16
12. Electrical Connections .............. 18
13. Commissioning ...................... 19
13.1 VistaScan Perio Plus ............ 19
13.2 X-ray device settings ............. 20
13.3. Commissioning and Constancy
Checks .........................20
Use of the Appliance
14. Image plate ......................... 21
14.1 General ........................ 21
14.2 Working with image plates .......22
14.3 Storing image plates ............ 22
15. Light protection covers .............. 23
16. Foil cassettes ....................... 23
17. Bite protector ........................ 23
18. Hygienic covers ...................... 24
19. Storage box with image plate
storage tray .......................... 24
20. X-ray ................................ 25
20.1 Preparing to X-ray ............... 25
20.2 X-ray exposures ................ 26
20.3 Preparing to scan image data . . . . . 27
20.4 Scanning the image data .........29
20.5 Erasing the image data ..........31
20.6 Removing the image plate from
the cassette .....................31
21. Disinfection and Cleaning ........... 32
21.1. Light protection covers ........... 32
21.2 Image plates ................... 32
21.3. Foil cassettes ................... 33
21.4. Storage box with
image plate storage tray ..........33
21.5 VistaScan Perio Plus ............ 34
22. Maintenance ......................... 35
22.1 Changing fluorescent lamps . . . . . . 35
22.2 Maintenance intervals ............ 35
Trouble-shooting
23. Tips for Operators and Technicians . . 36
23.1 VistaScan Perio Plus ............. 36
23.2 Error message on display ........40
Appendix
Image process times ....................41
File size (uncompressed) ................41

EN
4
Important
Information
1. General
1.1 Note on Conformity
This product has been tested for conformity
according to the appropriate directives as laid
down by the European Union and has been
found to conform to all the required specifica-
tions.
1.2 General Notes
• These Installation and Operating Instructions
form an integral part of the unit. They must
be kept close to the unit at all times. Precise
observance of these instructions is a pre-
condition for use of the unit for the intended
purpose and for its correct operation.
New personnel must be made aware of the
contents, and they should be passed on to
future operating staff.
• Safety for the operator as well as trouble-free
operation of the unit are only ensured if use is
made of original equipment parts. In additi-
on, only those parts and accessories listed
in the Installation and Operating Instructions
or specifically approved by Dürr Dental may
be used with this appliance. In the case that
accessories, parts or disposable materials
from third party suppliers are used, then Dürr
Dental cannot guarantee the safe operation or
smooth running of the unit. No liability on the
part of the manufacturer will be accepted in
the case that damage arises through the use
of non-approved accessories.
• Dürr Dental are only responsible for the equip-
ment with regard to safety, reliability and pro-
per functioning where assembly, resettings,
changes or modifications, extensions and
repairs have been carried out by Dürr Dental
or an agency authorized by Dürr Dental and if
the equipment is used in conformity with the
Installation and Operating Instructions.
• These Installation and Operating Instructions
conform to the relevant version of the equip-
ment and the underlying safety standards
valid at the time of going to press. All circuits,
processes, names, software and appliances
quoted are protected under industrial property
rights.
• This translation of the Installation and Opera-
ting Instructions has been carried out in good
faith. The manufacturer bears no liabilities in
the case of a mistake in the translation. The
enclosed German version of the Installation
and Operating Instructions is the original; in
the case of any confusion please consult your
dealer or our hotline service.
• Any reprinting of the technical documentation,
in whole or in part, is subject to prior written
approval of Dürr Dental.
• Retain the packaging for possible return of the
product to the manufacturers. Only the origi-
nal packaging provides adequate protection
during transport of the unit.
• If the product must be returned to the ma-
nufacturer during the guarantee period, Dürr
Dental accepts no responsibility for damage
occurring during transport where the original
packaging was not used!
Ensure that the packaging is kept out of the
reach of children.
1.3 Disposal of appliance
appliance
• The EU-guidlines 2002/96/EG - WEEE
(Waste Electric and Electronic Equipment) ) of
27th January 2003 and the current integration
into national law states that dental products
come under the above-mentioned guidelines
and, within the European Union, are subject to
special disposal measures.
image plate
Observe local and regional rules and regulations
when disposing of image plates.
If you have any questions concerning disposal
of the product, please contact Dürr Dental or
your specialist dental supplier.
1.4 Notes concerning medical
appliances
• This product is a technical medical appli-
ance and, as such, may only be operated by
such persons who, as a result of training or
experience, can be confidently expected to
operate it correctly and safely for patients and
staff alike.
• Do not lie multi-socket units on the floor.
Observe standard EN60601-1-1 when using
multi-socket units.
• Other systems should not be plugged into the
same multi-socket unit.

EN
5
1.5 Notes on EMC and medical
products
Medical products should be treated with respect
when it comes to electro-magnetic compatibility
and special safety measures must be taken.
Special instructions concerning electro-ma-
gnetic compatibility for medical products can
be found in our special leaflet, order number
9000-606-67/30, or the information can be
found on the internet (www.duerr.de) in the
Technical Documentation download pages.
• Portable and mobile HF-communication
appliances can interfere with the effectiveness
of electrical medical appliances.
• VistaScan Perio Plus should not be used in
the vicinity of other appliances or stored or
used on top or underneath other appliances.
Where VistaScan Perio Plus will be used or
stored in the vicinity of other appliances, then
the unit in its configuration as used should
be very carefully monitored in order to ensure
normal and trouble-free operation.
1.6 Correct usage
• VistaScan Perio Plus has been solely desi-
gned for the optical scanning and editing of
image data using image plates.
• This appliance is not suitable for monitoring
patients over longer periods of time.
• VistaScan Perio Plus is intended to be set
up in a central location. The device must be
installed away from patients (1.5 m) according
to IEC 60601-1-1 (EN 60601-1-1).
• Correct Usage of the appliance also invol-
ves observing the Installation and Operating
Instructions and adhering to those instructions
concerning set-up, operating and mainte-
nance.
Every usage which is not in accordance with the
Correct Usage above will lead to the guaran-
tees and warranties of Dürr Dental becoming
null and void.
The operator is liable for any damage arising
through incorrect usage.
• Correct Usage also involves observing all local
and national regulations concerning health
and safety at work and radiation prevention.
1.7 Incorrect usage
Any usage above and beyond that described
here is to be considered as incorrect usage of
the appliance. The manufacturer is not liable for
any damages arising from incorrect usage. The
operator bears all risks and liabilities.
This appliance must not be used in
operating theatres or similar rooms,
or any room where dangers such as
combustion of flammable materials
could result.
1.8 Connecting peripheral
appliances
• Only peripheral devices (computer, monitor,
printer) may be connected to this appliance
which conform to standard IEC 60950-1 (EN
60950/1).
The computer must be out of the vicinity of
the patients according to IEC 60601-1-1
(EN 60601-1-1). If for any reason this is not
possible then the computer set up must be
installed according to the IEC 60601-1 -1 (EN
60601-1).
• Appliances may only be connected together
or connected to any other assemblies where
complete and utter safety of the patients,
operators and staff and of the environment will
not be affected in any way.
Where any doubts remain concerning the
safety when connecting to other units then
the operator is obliged to ascertain that such
connection can in no way affect the safety
of operator, patient or other staff by referring
to the manufacturer or a fully qualified and
competent expert.
1.9 Using image plates
VistaScan Perio Plus may only be used in com-
bination with Dürr Dental image plates PLUS.
See also the section on image plates.
1.10 Using software
Only use x-ray software, e.g. DBSWIN from ver-
sion 5.0.2, which has been specifically approved
by Dürr Dental. Further information can be found
on the internet under www.duerr.de.
Please refer to the leaflet on minimum
PC system requirements, order number
9000-618-148/01, or under www.duerr.
de.

EN
6
2. Safety
2.1 General Safety Notes
This appliance has been designed and
constructed by Dürr Dental so that correct
usage of the appliance is virtually free of any
possible injury or danger. In spite of this, we
feel it is our duty to mention the following safety
measures in order to prevent any possible
danger.
• When using this appliance all local and rele-
vant regulations must be observed!
Converting or modifying the appliance in
any way is strictly prohibited. In such cases,
any and all guarantees immediately become
invalid. The operation of modified appliances
can be punishable by law. In the interests of
trouble-free operation the operator is respon-
sible for observing these regulations.
• Installation must be carried out by a qualified
technician.
• Before every use the operator must check
the functional safety and the condition of the
appliance.
• The operator must be knowledgeable in the
operation of the appliance.
• The product is not designed to be used in
medical treatment areas where there exists
the danger of explosion. Areas where explo-
sions could occur are those where flammable
anesthetic material, skin cleansers, oxygen
and skin disinfectants are present. This
appliance is not to be used in areas where the
atmosphere could cause fire.
2.2 Electrical safety instructions
• The appliance may only be connected to a
correctly installed earthed safety socket.
• Before connecting to the electricity supply
the appliance must be inspected and che-
cked that the supply voltage and the supply
frequency correspond to that of the local
electrical supply.
• Before initial use and start-up the appliance
and all supply lines must be checked for any
signs of damage. Damaged supply lines and
connections must be replaced immediately.
• Never come into contact with patients and
open plug-in connections on the appliance at
the same time.
• When using the appliance observe all the
relevant electrical safety procedures.
Before opening the unit
unplug at the mains and remove all power!

EN
7
3. Warnings andsymbols
3.1 Installation and
operating Instructions
In the operating instructions the following war-
nings and symbols have been used:
Information and/or mandatory regu-
lations or prohibitions for the preven-
tion of personal injury or substantial
property damage
Special instructions concerning econo-
mic usage of the appliance and other
notes.
Unplug at the mains and remove all
power!
ON / OFF key
Operational LED, green
Standby
Operational LED, blue
Data transmission
Only use once (disposable)
Wear protective gloves
3.2 VistaScan Perio Plus
The model identification plate can be found on
the rear side of the VistaScan Perio Plus.
The following terminology and/or symbols are
applied on this appliance, in this appliance, the
model identification plate and the power unit:
Warning Laser
Warning dangerous voltage.
Laser beam class 3B
Protection class 2
Date of manufacturer
Observe notes in accompanying docu-
mentation!
Dispose of correctly according to EU
directive (2002/96/EG-WEE)
IP20 Fuse type
REF Order No. / Model No.
SN Serial No.
CE-label without
Notified Body number

EN
8
4. Delivery Contents
VistaScan Perio Plus 2140-21
VistaScan Perio Plus . . . . . . . . . . 2140-000-80
Mains cable (EUR) . . . . . . . . . . . . 9000-118-71
Mains cable (GB) . . . . . . . . . . . . 9000-119-065
Power unit . . . . . . . . . . . . . . . . . 2140-470-00
Data cable (USB 3m) . . . . . . . . 9000-119-067
Data cable (RJ 45 3m) . . . . . . . 9000-119-071
software DBSWIN Standard . . . . 2100-725-02
2 Dürr image plates
-Size 0- 2x3 (22x35 mm) . . . . . . . 2130-040-50
4 Dürr image plates
-Size 2- 3x4 (31x41 mm) . . . . . . . 2130-042-50
1 foil cassettes
-Size 0- 2x3 . . . . . . . . . . . . . . . . 2140-010-00
2 foil cassettes
-Size 2- 3x4 . . . . . . . . . . . . . . . . 2140-012-00
Light protection covers
-Size 0- 2x3 (100 pieces) . . . . . . 2130-070-00
Light protection covers
-Size 2- 3x4 (300 pieces) . . . . . . 2130-072-00
Cleaning wipes for
image plates . . . . . . . . . . . . . . . CCB351B1001
Foil pad . . . . . . . . . . . . . . . . . . . 2140-002-01
Fluorescent lamp . . . . . . . . . . . 9000-109-75E
Installation and
Operating Instructions . . . . . 9000-618-167/30
4.1 Special accessories
The following parts are not supplied with the
contents of delivery.
Please order as required!
Wall mounting bracket. . . . . . . . . 2141-001-00
Test body Intra - Extra . . . . . . . . 2121-060-54
Hygienic cover
-Size 0- 2x3 (100 pieces) . . . . . . 2130-070-60
Hygienic cover
-Size 2- 3x4 (300 pieces) . . . . . . 2130-072-60
2 Dürr image plates
-Size 0- 2x3 (22x35 mm) . . . . . . . 2130-040-50
2 Dürr image plates
-Size 1- 2x4 (24x40 mm) . . . . . . . 2130-041-50
4 Dürr image plates
-Size 2- 3x4 (31x41 mm) . . . . . . . 2130-042-50
2 Dürr image plates
-Size 3- 2.7x5.4 . . . . . . . . . . . . . 2130-043-50
1 Dürr image plate
-Size 4- 5.7x7.6 . . . . . . . . . . . . . 2130-044-50
Data cable (USB 5m) . . . . . . . . 9000-119-027
Data cable (RJ 45 5m) . . . . . . . 9000-118-036
Storage box
with image plate storage tray . . . 2141-002-00
The usage of other components, trans-
formers and cables as those specifically
listed under accessories, can lead to
either increased signal output or reduce
the resistance to interference of the
system.

EN
9
4.2 Disposable materials
FD 350 Disinfectant wipes . . . . . CDF350C0140
FD 333 Quick-acting
disinfectant . . . . . . . . . . . . . . . . CDF333C6150
FD 322 Quick-acting
disinfectant . . . . . . . . . . . . . . . . CDF333C6150
Light protection covers
-Size 0- 2x3 (100 pieces) . . . . . . 2130-070-00
Light protection covers
-Size 1- 2x4 (100 pieces) . . . . . . 2130-071-00
Light protection covers
-Size 2- 3x4 (300 pieces) . . . . . . 2130-072-00
Light protection covers
-Size 3- 4 2.7x5.4 (100 pieces) . . 2130-073-00
Light protection covers
-Size 4- 5.7x7.6 (100 pieces) . . . 2140-074-00
Light protection covers Plus
-Size 0- 2x3 (100 pieces) . . . . . . 2130-070-50
Light protection covers Plus
-Size 2- 3x4 (300 pieces) . . . . . . 2130-072-50
Bite protectors
-Size 4- (100 pieces) . . . . . . . . . . 2130-074-03
Cleaning wipes for
image plates . . . . . . . . . . . . . . . CCB351B1001

EN
10
5. System requirements
To operate VistaScan Perio Plus, the compo-
nents listed under sections 5.1 and 5.2 will
be required. These are not included within the
standard scope of delivery with the VistaScan
Perio Plus.
5.1 Monitor
Monitors designed for digital x-ray processes
with a higher light intensity and broad con-
trast range should be used. Strong room
lighting, direct sunlight and reflections all
serve to reduce the diagnostic capabilities of
the X-ray exposures. See also the supplied
system explanation in No.: 9501-21-016
supplied.
5.2 PC system
Please refer to the leaflet on mini-
mum PC system requirements, order
number 9000-618-148/01, or under
www.duerr.de.

EN
11
6. Technical Data
6.1 VistaScan Perio Plus
Electrical Details
power unit
Voltage (V) . . . . . . . . . . . . . . . . . . . . . .100 - 240
Maximum
fluctuation in rated current (%) . . . . . . . . . . +/- 10
Frequency (Hz) . . . . . . . . . . . . . . . . . . . . 50 - 60
Current (A) . . . . . . . . . . . . . . . . . . . . . . max. 1,5
Current consumption (W) . . . . . . . . . . . . . . . <70
Fuse type ...........................IP20
Protection class ........................ II
Overvoltage category . . . . . . . . . . . . . . . . . . . . II
Electrical ratings and connection data
VistaScan Perio Plus
Voltage (V, DC) ........................24
Maximum
fluctuation in rated current (%) . . . . . . . . . . +/- 10
Current (A) . . . . . . . . . . . . . . . . . . . . . . max. 2,5
Current consumption (W) . . . . . . . . . . . . . . . <60
Dimensions
W = 310 mm, H = 523 mm, D = 293 mm
Weight
VistaScan Perio Plus (kg) . . . . . . . . . . . . ca. 12.5
Noise levels
Stand-by (db(A)) . . . . . . . . . . . . . . . . . approx. 42
at scanning (db(A)) . . . . . . . . . . . . . . . approx. 45
General values
Laser protection class . . . . . . . . . 1 (EN60825-1)
Wave length λ 635 nm
10 mW
EN 60825-1:2006-04
Heat radiation (W) . . . . . . . . . . . . . . . . . . . . . <70
Pixel size
can be selected from range (µm) . . . . . 12.5 to 50
Resolution (depending on image
plate)
line pairs/mm (Lp/mm) . . . . . . . . . . . max. ca. 40
Conformity Acceptance Procedure
Medical device . . . . . . . . . . . . . . . .93/42/EWG
Medical device classification
VistaScan Perio Plus . . . . . . . . . . . . . . . . . . . . . .I
Light protection cover . . . . . . . . . . . . . . . . . . . . .I
Hygienic covers .........................I
Image plate ........................... IIa
EMC
Conducted HF-disturbance V1
according to IEC 61000-4-6 (Veff) ............3
Radiated HF-disturbance V1
according to IEC 61000-4-3 (Veff) . . . . . . . . . . . 4
6.2 Environmental conditions
VistaScan Perio Plus
Temperature ranges
Appliance in operation (°C) . . . . . . . . .+10 to +35
Storage and transport (°C) . . . . . . . . . -20 to +60
Ambient air pressure
Appliance in operation (%) . . . . . . . . . .750 - 1060
Operational altitude (m) . . . . . . . . . . . . . . . <2000
Storage and transport (%) . . . . . . . . . .750 - 1060
Operational altitude (m) . . . . . . . . . . . . . . <16000
Relative humidity
Appliance in operation (%) . . . . . . . . . . . . 20 - 80
Storage and transport (%) . . . . . . . . . . . . 10 - 95
image plate
Storage and transport
Temperature (°C) . . . . . . . . . . . . . . . . . . . . . . <33
Relative humidity (%) . . . . . . . . . . . . . . . . . . . <80
Use of the Appliance
Temperature (°C) . . . . . . . . . . . . . . . . . . . . <4518
Relative humidity (%) . . . . . . . . . . . . . . . . . . . <80

EN
12
7. Functional layout
1
2
3a 3b
4
5b
6
7
7a
7b
7 c
8
9
9a
9 c
10
12
9b
5a
11

EN
13
7.1 Function of individual
components
1. Image plate
The image plate serves as the exposure medium
for X-rays and stores the image data.
2. Light protection covers
• Light protection covers protect the patient
from infection by contaminated image plates.
• Reduces the risk of damage to the image
plate in the patient's mouth.
• Protects the image plate from contamination
and dirt.
• Prevent image data on the image plate from
being erased.
3 a. and 3 b. Input unit:
The foil cassettes are positioned on the input
unit and run to the transport slot.
4. Control LED:
Green LED:
VistaScan Perio Plus is ready for operation.
Blue LED "illuminated":
VistaScan Perio Plus is switched on but is not
yet initialised or there is no active data connec-
tion to the PC.
5. Status LED´s
Transport slot 1 (5 a) and 2 (5 b) :
Green LED:
Cassette can be pushed into the respective
transport slot.
Yellow LED:
1 or 2 cassettes in the respective transport slot.
Read LED:
Fault in respective transport slot.
6. On / Off key:
To switch on or off, press the key for 2 seconds.
7. Transport slot:
The foil cassette runs through the transport
slot of the input buffer, the scanner unit and the
erasure unit.
7 a. Input buffer:
When inserting two cassettes, they are fed into
the scanner unit one after the other.
7 b. Scanner unit:
Here, the image data is read from the image
plates and digitalised.
7 c. Erasure unit:
The remaining image data on the image plate is
erased automatically after reading.
8. Output unit with output buffer:
After erasing, the foil cassette is transported into
the output unit. Up to 3 foil cassettes can be
put there in a row.
9. Foil cassette:
The foil cassette consists of a cover, a cassette
and a cassette cover:
9 a. Cover:
Half open (Cover locked in):
• Image plates can be inserted.
Open:
• Cassette can be cleaned.
• Image plates can be removed from the cas-
sette
9 b. Cassette:
• Image plates are pushed into the cassette.
• The image plate is transported through
the transport slot and are scanned with no
contact.
9 c. Cassette cover:
• Protects the image plate from light in the
cassette.
• Positions the cassette on the input unit.
• Feeds the cassette into the transport slot.
10. Foil pad:
After removing the cassette from the output
unit, the image plates are tipped onto the foil
pad.
11. Display
This display module presents, depending on
the software used, various information on the
appliance status, e.g. in combination with DBS-
WIN the patient name, room used or the tooth
number.
In the case that an error message is
displayed, see section on Tips for Ope-
rators and Service Technician.
12. Wall mounting bracket:
The VistaScan Perio Plus can be inserted into
the wall mounting bracket when not in use.

EN
14
8. Functional Description
VistaScan Perio Plus transforms the image data
stored on an intraoral image plate into a digital
X-ray. This image can then be viewed and edi-
ted using the connected PC system.
VistaScan Perio Plus is a multi-slot scanner with
input and output buffer. Image data can be read
and erased simultaneously from 4 foil cassettes
with up to 8 installed image plates via the two
transport slots.
X-ray:
The intraoral image plate (1) is placed inside the
disinfected light protection cover (2), placed into
the patient's mouth and exposed.
After exposure the light protection cover is disin-
fected and the image plate is removed and slid
into a foil cassette (9) of the appropriate size.
The foil cassettes can take up to two image
plates with formats size 0 to size 3 and one
image plate with format size 4.
Scanning the image data
Pressing the on/off button (6) switches on the
VistaScan Perio Plus. The image data editing
and the archive software, e.g. DBSWIN from V
5, of the scanning mode is then activated.
If the status LEDs (5) are illuminated in green,
the foil cassette (9) can be installed on one of
the two input units (3).
The cassette (9b) is then pushed out of the
cassette cover (9c) into the transport slot (7)
with the fingers. The cassette cover (9c) remains
locked in the input unit and can be removed
afterward. It is possible to push in up to 2
cassettes into the transport slots, one after the
other, through the input buffer (7a). (Observe
status LED´s (5)!)
Inside the transport slot (7), the cassette runs
through the scanner unit (7b). Here the image
data on the image plate is scanned and trans-
mitted to the PC. A window on the monitor
shows the progress of this procedure. If more
than one image plate is being scanned simul-
taneously then this will take place at the same
resolution.
After scanning, the cassette (9b) runs through
the erasure unit (7c), where remaining image
data is erased on the image plate. The cassette
is then transported into the output unit (8). Up to
3 cassettes can then be put in a row there and
can then be picked up.
Further X-ray images
After removing the cassette from the output unit
(8), the cover (9a) of the cassette is opened and
the image plates are tipped onto the foil pad
(10). The image plates can then be pushed into
the light protection cover again and used for
new X-rays.
If used carefully it is possible to reuse the image
plates several hundred times. Before reuse the
image plates should be checked for signs of dirt
or damage. Damaged image plates must not be
reused.
image plate
Parabolic mirror
Photomultiplier
laser source
reflection layer
Pentaprism
Rotating disc

EN
15
Mounting
Only suitably qualified personnel are
permitted to set up, to install or to
operate the appliance.
9. Transport and packing
• Check that the delivery contents are complete
and check for any signs of transport damage.
• Completely empty the packaging.
• Do not expose the VistaScan Perio Plus to
any strong shocks which could damage the
appliance.
Damage throughshock.
During operation and the switching
off process (blue and green operatio-
nal LEDs blinking alternately) ensure
that the appliance is not moved in
any way whatsoever, as the moving
parts must be allowed to stop mo-
ving completely.
10. Moving the
VistaScan Perio Plus
Always carry the VistaScan Perio
Plus by the underside of the housing
(Fig. 1).
Never carry the VistaScan Perio Plus
with the output slot or the cover,
since this can damage sensitive
components of the VistaScan Perio
Plus. (Figs. 2 and 3)
2
1
3

EN
16
11. Set-up
11.1 Room for Set-up
• The VistaScan Perio Plus should be set up in
a closed, dry and well-ventilated room.
• The room temperature should not fall below +
10°C or exceed + 35°C.
Danger of short circuit due to
build up of condensation.
The system can only be put into
operation once the appliance has
warmed up to room temperature and
it is dry.
• Installation in a purpose-built room, e.g. in a
boiler room or in a wet room is not permitted.
• Do not expose the VistaScan Perio Plus to
direct sunlight. It may be necessary to reduce
the amount of light within the room. The maxi-
mum light intensity is 1000 Lux.
• There must be no source of interference in the
room for set-up (e.g. strong magnetic field).
Any such disturbances can interfere with the
operation of the VistaScan Perio Plus.
11.2 Set-up alternatives
Wall mounting
• Choose the installation location (Fig. 4) so that
VistaScan Perio Plus is accessible for mainte-
nance.
• VistaScan Perio Plus can be mounted on
a wall with a wall mounting bracket (Fig. 5)
(Order number 2140-001-00).
The wall mounting bracket (Fig. 5) is
supplied without any fastening materi-
als. Safe fixing should be carried out by
a qualified person. The mounting fixture
used must be able to support a weight
4-times higher than the actual weight of
the VistaScan Perio Plus.
The 4 bore holes in the wall mounting
bracket have a diameter of Ø 7 mm.
• Fasten wall mounting bracket part 1 (11b) on
the rear of the VistaScan Perio Plus.
• Mount the wall mounting bracket part 2 (11c)
on the wall.
12a
12b
12b
12 c
12d
4
5
6

EN
17
• Place the spacer screw (11a) into the thread
on the rear.
• Hang the VistaScan Perio Plus in the wall
mounting bracket.
• Align the VistaScan Perio Plus using the
spacer screws (11a).
12a
7
8
Table Set-up
VistaScan Perio Plus can also be mounted on
a table.
In order to avoid problems when
scanning the image data, the VistaScan
Perio Plus should be set up so that will
not be subject to knocks, vibration or
similar.

EN
18
12. Electrical Connections
Before initial start-up compare the operating
voltage of 24 V DC and the supply voltage
100 V - 240 V are consistent with the information
on the model identification plate.
The connection ports are in the recesses on the
rear side of the appliance.
• Connect the mains cable to the appliance
power unit and to the mains supply.
• Connect the power cable to the socket on the
VistaScan Perio Plus.
• Fasten the cable with the cable clip.
• Place the power cable into the power outlet
socket.

EN
19
13. Commissioning
13.1 VistaScan Perio Plus
Installation and configuration may only
be carried out by a Dürr Dental trained
and certified person or one of our own
service technicians.
VistaScan Perio Plus is equipped with four con-
nection ports which are located under the cover
on the rear side of the unit:
13. USB-connection
VistaScan Perio Plus can be operated using
USB connections.
Where VistaScan Perio Plus is con-
nected to both USB and a network, the
network takes priority.
14. 24 V - Connection
The 24 V -connection provides the power to
operate the VistaScan Perio Plus.
15. Network connection status LEDs
The status LEDs for networking show whether
connection to a network has been established
and whether data can be transmitted.
16. AUX-connection
The AUX-connection is used for diagnosis
purposes by our Service Technician. The AUX-
connection can be used to connect auxiliary
devices for testing and for trouble-shooting.
Only use auxiliary devices specifically
approved or manufactured by Dürr
Dental.
17. Network connection
VistaScan Perio Plus can be operated on a
network as well.
18. Reset button
Pressing and holding the Reset button for
15 - 20 seconds while switching on returns all
network settings of the unit to the original facto-
ry settings. Reset is confirmed and the Vista-
Scan Perio Plus display shows "Factory Reset".
13
16
17
14
9
18
15

EN
20
13.2 X-ray device settings
Check the following appliance-specific standard values and adapt as required.
Reference conditions:
• Adult patient
13.3. Commissioning and Constancy Checks
Before the appliance can be used the first time a handover test (commissioning test) of the
X-ray system must be carried out according to national and local regulations. The test body for
Intra / Extra (order number 2121-060-54) will be required.
The Constancy Check of the X-ray system must be carried out by surgery staff at frequent
intervals. The Constancy Check is based on those results obtained during the handover test.
* observe all rules and regulations!
Parameter DC-emitter, 7 mA,
tube length 20 cm
DC-emitter, 7 mA,
tube length 30 cm
recommended
exposure time (s)
recommended
exposure time (s)
upper jaw 60kV 70kV 60kV 70kV
incisors 0.1 0.08 0.2 0.16
pre-molars 0,125 0.1 0.25 0.2
molars 0.16 0,125 0.32 0.25
lower jaw 60kV 70kV 60kV 70kV
incisors 0.1 0.08 0.2 0.16
pre-molars 0,125 0.1 0.25 0.2
molars 0,125 0.1 0.25 0.2
Bitewing 0.16 0,125 0.32 0.25
Where it is possible to the set x-ray tube to 60 kV, this setting should be selected.
The usual exposure values for F-Film (e.g. Kodak Insight) can be used.