Dynamix 201 User manual

D
Dy yn na am mi ix x D DW W P Ph ho on ne e L LP P - - 2 20 01 1
V
Vo oI IP P P Ph ho on ne e ( (S SI IP P) )
User Manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Chapter 1 Overview of the Dynamix DW-Phone LP-201 ......................................................4
1. Hardware Overview..................................................................................................5
1.Front View and Keypad function.........................................................................5
2.Back View...........................................................................................................9
3.Specification of connector...................................................................................9
2. Software Features and Specification ...................................................................... 11
3. Physical specification & Environment.....................................................................13
Chapter 2 Configuring the Dynamix DW-Phone LP-201 through LCD Phone menus.........14
1. Initialize Dynamix DW-Phone LP-201 ....................................................................14
2. LCD Menu Configuration........................................................................................16
Chapter 3 Configuring the Dynamix DW-Phone LP-201 through Web Pages....................22
Step 1. Browse the IPAddress predefined via Keypad...............................................23
Step 2. Input the login name and password................................................................24
Step 3. Enter the web interface main screen..............................................................25
Step 4. Start to configure ............................................................................................25
1. Network Interface ............................................................................................26
2. SIP Information................................................................................................29
3. System Configuration ......................................................................................31
4. PPPoE Configure ............................................................................................32
5. Voice Setting....................................................................................................33
6. Phone Book.....................................................................................................34
7. DDNS Configuration........................................................................................35
8. DSCP Configuration ........................................................................................36
9. Password.........................................................................................................38
10. Rom Configuration.........................................................................................39
11. Flash Clean....................................................................................................40
12. Reboot System..............................................................................................41
Chapter 4 Configuring the Dynamix DW-Phone LP-201 through Telnet command lines.....42
1. [help] command......................................................................................................42
2. [quit] command.......................................................................................................43
3. [debug] command...................................................................................................43
4. [reboot] command...................................................................................................43
5. [pbook] command...................................................................................................43
6. [commit] command .................................................................................................44
7. [ping] command......................................................................................................44
8. [time] command......................................................................................................45
9. [ifaddr] command....................................................................................................45
10. [pppoe] command.................................................................................................47
1

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
11. [flash] command....................................................................................................47
12. [sysconf] command...............................................................................................48
13. [sip] command ......................................................................................................49
14. [security] command...............................................................................................50
15. [voice] command...................................................................................................51
16. [tos] command......................................................................................................52
17. [ddns] command...................................................................................................54
18. [vlan] command ....................................................................................................55
19. [bureau] command................................................................................................56
20. [rom] command.....................................................................................................57
21. [passwd] command...............................................................................................58
Chapter 5 Upgrading Software on the Dynamix DW-Phone LP-201 .................................59
1.From LCD Phone Menu...........................................................................................59
2. Web Management ..................................................................................................60
3. Remote Control: Telnet...........................................................................................61
2

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Chapter 1 Overview of the Dynamix DW-Phone LP-201
SIP-Phone
Dynamix DW-Phone LP-201 is a full-featured IP-based telephone set via Ethernet base
communication. Over the office LAN connection, it provides IP-PBX solution such as
station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway.
Dynamix DW-Phone LP-201 provides two 10/100BaseT switch/hub RJ-45 ports allow
connecting to office LAN and PC simultaneously. It is compatible with ADSL or Cable
Modem provided by ITSP, ISP or Carrier Company to provide VoIP services to
residential and SOHO application. Dynamix DW-Phone LP-201 is also an integrated
Analog Phone provides IP call or PSTN call selection. When external power is down, it
can be a Plain Old Telephone set (POTs).
It provides internal high-quality speakerphone, programmable keys and feature buttons.
Dynamix DW-Phone LP-201 also embedded with a dot matrix of two lines 24 characters
LCD, which can display date and time, calling party name, calling party number, and digits
dialed and etc.
4

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
1. Hardware Overview
1.Front View and Keypad function
♦ LCD: 2 lines, 24 character Dot Matrix display.
♦ C: Jump out current LCD menu.
♦  : Move to previous selection or clear previous data.
♦  : Move to right or next selection.
♦ OK: Press OK to confirm the modification.
♦ Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial
according to phone book data from 1-10 (please refer to LCD configuration-3.Phone
Book; Advanced Configurations via Telnet- 10.[pbook] command, or Web
Configuration-Phone Book chapter.
5

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
♦ Number 1 –10, * and #: The function is the same as the general phone set.
Corresponding list of keypad and symbol:
(1) Character mode:
1“1”
2“A” ; “ B” ; “C” ; “2”
3“D” ; “E” ; “F” ; “3”
4“G” ; “H” ; “I” ; “4”
5“J” ; “K” ; “L” ; “5”
6“M” ; “N” ; “O” ; “6”
7“P” ; “Q” ; “R” ; “S” ; “7”
8“T” ; “U” ; “V” ; “8”
9“W” ; “X” ; “Y” ; “Z” ; “9”
*“.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*” ; “’” ; “+” ; “$” ; “*”
0“Space” ; “0”
#“#”
(2) Digit mode:
1“1”
2“2”
3“3”
4“4”
5“5”
6“6”
7“7”
8“8”
9“9”
*“.”
0“0”
#
♦ MUTE: Mute the voice of MIC and let others can’t hear from user in communication.
♦ PSTN: Press PSTN to switch Dynamix DW-Phone LP-201 as PSTN or IP Phone Mode.
In PSTN mode,
“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as
if standard telephone set in PSTN; in IP Phone mode, “PROXY ” characters will be
displayed on LCD left bottom side.
6

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Note:
1. When Dynamix DW-Phone LP-201 is in PSTN mode, only PSTN and SPEAKER
function key can work.
2. On LCD will display ”…Incoming Call... ” to inform user when Dynamix DW-Phone LP-201
has both IP and PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side, then press PSTN
to pick up PSTN side, after that can press HOLD again to retrieve IP side.
4. If in communication with PSTN side, user must hang up PSTN side before pick up IP
side.
♦ HOLD: To hold a call, after press HOLD button, both sides will hear hold tone.
♦ SPEED:
1. Press SPEED and number (Phone book index) after off-hook can do speed dial
according to phone book data (please refer to 3.LCD configuration-6. Phone Book
or Advanced Configurations via 4.Telnet- 10. [pbook] command).
2. Switch input mode between character mode or digit mode, e.g., when user wants to
input phone number can press SPEED to switch input mode as digit mode; when
user wants to input name can also press SPEED to switch input mode as character
mode.
♦ FORWARD: Forward an incoming call to another IP device. (Please refer to LCD
configuration-Forward Type)
♦ MESSAGE and its indicated LED light: When having missed incoming calls, the
MESSAGE LED will be flashing. User can check the information of missed calls by
pressing the MESSAGE button.
♦ TRANSFER:
1. Transfer a call to the third site. When A and B are in communication, A wants to
transfer this call to C, A can press TRANSFER button, now B will hear hold tone,
and A will hear dial tone, thenA can press phone number of C, after C picks up,A
can talk with C, after A hangs up, B and C can be connected.
Note:
1. A cannot press phone number of C before hearing dial tone.
2. If Apress TRANSFER and number, press TRANSFER again can cancel
transferring and retrieve call with B.
3. If Apress TRANSFER and number of C, C is ringing, press TRANSFER
again C will return to standby mode and A can retrieve call with B.
4. Before C picks up, A cannot hangs up the phone.
7

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2. Change characters to be capital or lowercase: when pressing TRANSFER before
press letters can switch input type of letters.
♦ REDIAL: Redial the last outgoing call.
♦ + And -: Adjust the voice volume heard of communication.
♦ SPEAKER: Hand free mode. User can talk without picking up handset.
Note:
1. All function keys mentioned above (except dialing keypad) are effective only in IP
Phone mode.
2. When SIP Phone fail to register to Proxy server under Proxy mode, when user
wants to dial out, SIP Phone will play busy tone, and on LCD will display
“Register Failed.”
8

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2.Back View
♦ DC 9V: DC 9V power input outlet
♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5
cable.
♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
♦ Line: RJ-11 connector, connected directly to the PSTN analog line.
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is regular, LED of LINK/ACT will light on; when Dynamix DW-
Phone LP-201 is transmitting or receiving data, LED will be flashing; when transmit rate
is in 10 mbps or 100mbps, LED of 10/100 will light off or light on.
3.Specification of connector
1Ethernet Port：
Ethernet port is for connecting Dynamix DW-Phone LP-201 to network, transmit rate
supports 10/100 Base-T.
Ethernet connector（LAN）
9

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2RJ-11connector：
RJ-11 connector is for connecting Dynamix DW-Phone LP-201 with PSTN.
RJ11connector
10

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2. Software Features and Specification
Application:
 ISP/ITSP (Internet Telephony Service Provider)
 IP-PBX with office telephony services
 Multi-nation enterprise communication
 SOHO Telephony
Calling Features
 Call Hold
 Call Transfer
 Call Forward
 10 sets last number Redial
 Ten configurable speed dials
Network Supported
 Fixed IP
 Dynamic Host Configuration Protocol (DHCP)
 PPPoE connection (When PPPoE disconnect, SIP-Phone can automatically
re-connect)
 Behind NAT IP Sharing Device
 Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP
packet
 Support 802.1p1q (VLAN)
Audio Features
 G.711 a/µ-Law, G.723.1, G.729, G.729a
 VAD, CNG
 G.165/G.168 compliant echo cancellation
 Programmable Dynamic Jitter Buffer
 Bad Frame Interpolation
 Gain/Attenuation Settings
11

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Provisioning and Configuration
 SIP (RFC3261) compliance
 LCD configuration password protection
 Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection
 Ring tone, Speaker and Handset volume adjustable
 Dial path selection (PSTN or IP mode)
 Support DNS server inquiry
Management Features:
 Software Upgrade: TFTP/FTP download
 Three easy ways for system configuration
- LCD Front Panel
- Web Browser
- TELNET
Certification
 CE, 3C
12

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
3. Physical specification & Environment
Dimension:
 215mm(W) x 71mm(H) x 198mm(D)
Weight:
 834 grams (unit)
Power Supply:
 DC 9V output adaptor,AC 120Vac input
Operation Environment:
 Humidity: 10 to 90 % (Non-condensing)
 Operational Temperature: 0 to +40 °C
Storage Environment:
 Humidity: 10 to 90 % (Non-condensing)
 Storage Temperature: -10 to +50 °C
Analog Specification:
 2 wires (RJ-11) *1 (Voltage: -48V)
 AC Impedance 600 Ω
13

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Chapter 2 Configuring the Dynamix DW-Phone LP-201
through
LCD Phone menus
Note:
1. After any configuration is made for the SIP-Phone, user has to do Reboot in the
selection 7 “Reboot”.
2. We suggest user to set IP address via LCD menu 5 → 2.3.4.5 first, then go to
chapter 3 to do other detail configurations via web browser.
1. Initialize SIP-Phone
1. When power on the SIP-Phone, the LCD screen shows as below. Now Dynamix DW-
Phone LP-201 is running Boot sector program.
IP-Phone
Board Start Booting
2. When Dynamix DW-Phone LP-201 finishes boot program initialization. User can see
flashing greeting as below:
System Initializing…………..
3. Then Dynamix DW-Phone LP-201 get into standby mode:
SIP-Phone
Proxy 10:10:10 AM
The main LCD screen would be shown as similar as above. “Proxy” means the
Dynamix DW-Phone LP-201 is in Proxy Mode, and when Dynamix DW-Phone LP-201
is connected to SNTP server, on LCD will show current time captured from SNTP
server.
4. When Dynamix DW-Phone LP-201 is under peer-to-peer mode, on LCD will show
“P2P” instead of “Proxy”.
SIP-Phone
P2P 10:10:10 AM
14

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
5. After pressing the PSTN button, the “Proxy” or “P2P” will be replaced by “PSTN”.
Please notice that user must plug PSTN line in RJ-11 port when Dynamix DW-
Phone LP-201 is in PSTN mode. SIP Phone will always stay in IP mode, after a
PSTN call is finished, SIP Phone will automatically return to IP mode..
IP-Phone
PSTN 10:10:10 AM
6. Press
 or  to enter configuration mode then press OK button to enter sub
menus; press C can jump out current menu to previous level.
1. Call List
2. Forward Type
3. Phone Book
4. Ringer Settings
5. Network
6. Advanced Settings (protected by password)
7. Reboot
15

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2. LCD Menu Configuration
User can set the following configurations by LCD keypad.
Note: 1. Press TRANSFER before input data can switch characters to be capital or
lowercase.
2. Press SPEED before input data can switch input mode as character mode or
di
g
it mode; fo
r
e
x
ample, use
r
wan
t
stoen
t
e
r
IP add
r
ess, af
t
e
r
p
r
essin
g
SPEED
can enter digits directly.
3. When user is inputting data, press C will jump out to menu list, press  will
clear previous input data.
1. Call List
If there is an unanswered IP call, it will be kept in message box. MESSAGE LED will
be flashing until user press MESSAGE to check miss call and re-press MESSAGE
to return to main screen.
(1) Missed Calls：to see all missed calls in message box.
(2) Received Calls：to see all received calls in message box.
(3) Dialed Numbers: to see all dialed calls in message box.
2. Forward Type
There are 3 selections in Forward type, user must select under which condition to
forward calls.
(1) Busy
When Dynamix DW-Phone LP-201 is in busy status, the
incoming call will be forwarded to the assigned phone number.
A. Activate
Enter a forwarded phone number to activate busy forward function.
B. Deactivate
Deactivate Busy Forward function.
(2) No Response
When Dynamix DW-Phone LP-201 hasn’t been picked up for around
10 seconds, the incoming call will be forwarded to the assigned phone
number.
A. Activate
Enter a forwarded phone number to activate no response forward
function.
16

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
B. Deactivate
Deactivate No Response Forward function.
(3) Unconditional
It is included the above two types. Whether the Dynamix DW-
Phone LP-201 is in which status, calls will be automatically
forwarded to the assigned phone number.
A. Activate
Enter a forwarded phone number to activate Unconditional Forward
function.
B. Deactivate
Deactivate Unconditional Forward function.
3. Phone Book
1. List
List all records of name, telephone number, and IP address in the phone
address book.
2. Edit/Delete
Edit or delete a record of name, telephone number, and IP address of the
phone address book.
3. New
Add a new record of name, telephone number, and IP address of the phone
address book.
4. Ringer Settings
1. Volume
User can adjust ring volume by press
 or  on the keypad to decrease
or increase ringer volume.
2. Style
There are three tone styles for SIP-Phone. Move the “>” symbol by press

or  on the keypad to select the tone style preferred, then press OK
to confirm it.
17

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
5. Network
1. Information
User can press  or  to check current network status:
(1) Mode: Display current network connection mode of Dynamix DW-
Phone LP-201 to be Static (Fixed IP), DHCP, or PPPoE.
Note:
When Dynamix DW-Phone LP-201 is under DHCP mode, then
change to Static mode, the following items: IP address, Subnet
Mask, Default Gateway, will display empty, after reboot, user can see
information again.
(2) IP, Mask, Gateway: display current IP information.
2. Network Mode
Set network mode of Dynamix DW-Phone LP-201 to be Static (Fixed IP),
DHCP, or PPPoE.
3. IP address
Set IP address of SIP-Phone.
4. Subnet Mask:
Set subnet mask address of SIP-Phone.
5. Default Gateway
Set default gateway address of SIP-Phone.
6. Domain Name Server
Set IP address of Domain Name Server. Once Dynamix DW-Phone LP-
201 can connect to DNS server, user can set URL address for Proxy
server or Phone book instead of IP address.
7. PPPoE Configuration
(1) User Name
Set PPPoE connection authentication user name.
(2) Password
Set PPPoE connection authentication password.
(3) Auto Re-connect
Choose ON or OFF to enable or disable this function. If user enables this
function, after PPPoE disconnected, Dynamix DW-Phone LP-201 will
automatically reboot
to re-connect, and after reboot, if Dynamix DW-Phone LP-201 still can’t
connect with server, Dynamix DW-Phone LP-201 will keep trying to
connect. On the other hand, if user disables this function, Dynamix DW-
Phone LP-201 won’t reboot and keep trying to connect.
18

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
8. SNTP Configuration
(1) SNTP Mode:
User can set SNTP function to be on or off, which means Dynamix DW-
Phone LP-201 will capture current time from SNTP server or not.
(2) SNTP Server:
User can specify a SNTP server for Dynamix DW-Phone LP-201 to capture
current time.
(3) Time Zone:
User can set time zone via pressing  or  according to the
location Dynamix DW-Phone LP-201 is. For example, in Taiwan the
time zone should be set as GMT+8:00.
9. Behind IP-Sharing
(1) If Dynamix DW-Phone LP-201 is behind IP sharing or NAT device, on
IP sharing must enable “DMZ” function or set “Virtual Server” to open
ports (UDP port: 5060 and 16384).
(2) User must enter public IP address of IP sharing.
6. Advanced Settings (protected by password)
 Please Enter Password:
User must key in password to enter this menu, selections under this
command are all important ones, which can only be configured by advanced
users.
Note:
1. Default Password is empty, user can enter this sub-menu directly, once
password has been set in 3.LCD Menu password, user must input
password before enter this sub-menu.
2. If user forget password, please contact with the distributor, we will
generate a specific password according to your MAC address of
SIP-Phone.
3. User can also try to configure Dynamix DW-Phone LP-201 via Telnet or
Web browser with default IP address: 10.1.1.3. (This only works when
default IP address hasn’t been changed.)
1. SIP Settings
(1) Connect Mode
Select SIP connection mode to be peer-to-peer mode or Proxy mode.
19

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
(2) Proxy
A. Proxy
Set Proxy IP address or Domain Name.
B. Outbound proxy
Set Outbound Proxy IP address or Domain Name.
C. Proxy port
Set Proxy port for Dynamix DW-Phone LP-201 to send messages.
D. Expire (in seconds)
Set expire time of registration, in the duration of 2/3 expire time,
Dynamix DW-Phone LP-201 will re-register to Proxy Server again.
(3) User Info
A. User Name
Set User Name of Dynamix DW-Phone LP-201 to register to
Proxy Server. If Proxy server doesn’t request specific User
name, please enter Line number here.
B. Line Number
Set Line Number of Dynamix DW-Phone LP-201 to register to
Proxy Server.
C. Password
Set User Password of Dynamix DW-Phone LP-201 to register
to Proxy Server. This configuration is not necessary, if
Proxy server doesn’t request client to set password, user only
has to set User Name the same as Line Number.
2. Firmware Update
(1) Download method
There are two methods to download new version file, please move the “>“ symbol
by press  or  on the keypad to select TFTP or FTP method, then press
OK to confirm it.
(2) FTP/TFTP Sever
User has to offer one TFTP/FTP server IP Address and set this IP Address via
keypad.The IPAddressis necessaryforupgrading VoIP new application rom file.
(3) FTP Account
User has to input user name for FTP serverlogin .It is necessary for upgrading
Dynamix DW-Phone LP-201 new application rom file via FTP method.
(4) FTP Password
User has to input password for FTP server login .It is necessary for upgrading
Dynamix DW-Phone LP-201 new application rom file via FTP method.
20