Dynamix UM-A User manual

D
DY YN NA AM MI IX X U UM M- -A A A AD DS SL L R Ro ou ut te er r
Q
QU UI IC CK K S ST TA AR RT T G GU UI ID DE E

Contents
I. PANEL DESCRIPTION----- 1 PORT ADSL ROUTER
II. CONNECTING YOUR ADSL ROUTER----- 1 PORT
III. SET UP TCP/IP IN WINDOWS
OPTION-A WINDOWS ME / 98
OPTION-B WINDOWS 2000
OPTION-C WINDOWS XP
IV. SET UP ADSL ROUTER
Dynamix UM-A

II. Panel Description - Dynamix UM-A ADSL Router
1. Front Panel
PWR
Steady Green light indicates the Dynamix UM-A ADSL Router is powered on.
LINK/ACT
Blinking when Dynamix UM-A ADSL Router is actively sending/receiving data.
RxD
Blinking when data communication is active.
ADSL
Lit when a successful ADSL connection is established.
RDY
System status indicator. Blinking indicate system is alive.
2. Back Panel
ADSL
Connect to ADSL Line.
RESET
Restore the Dynamix UM-A ADSL Router’s factory default setting.
LAN
Connect to network device. Support auto crossover functionality.
AC JACK
Connect to AC Power Adaptor.
ON/OFF
Power ON/OFF Switch.
Dynamix UM-A

IV. Connecting y our Dynamix UM-A ADSL Router-
1. Wired connection mechanism :
2. Wired Connection :
A. Make sure all your network hardware and PCs are powered off.
B. Connect one end of your Ethernet network cable (RJ45) to one of the LAN ports
on the 1 Port ADSL Router, and plug in the other end to an Ethernet port on
your PC.
C. Connect your ADSL Line from the Splitter or Microfilter to the ADSL port of the
Dynamix UM-A ADSL Router.
D. Connect theAC Power Adaptor to the Dynamix UM-AADSL Router and the other
end of the adaptor to the wallet.
E. Power on your Notebook/PCs and the Dynamix UM-AADSL Router.
Dynamix UM-A

V. Set Up TCP/IP In Windows
Option-A Windows ME / 98
Dynamix UM-A

Option-B Windows 2000
Dynamix UM-A

Option-C Windows XP
Dynamix UM-A

VI. Set Up ADSL Router
1.
Launch your web browser, and enter the ADSL Router’s IP Address :
“10.0.0.2” in the address field then press the Enter key to login.
2. Enter the default User Name “admin” and Password “epicrouter”. Then press
“OK” to login.
3. Click “Automatic Setup” and follow the following steps to help you install the
ADSL Router quickly and easily.
Dynamix UM-A

STEP 1. Select the presetting country form the list.
m IP Mode : Click “Dynamic IP” or “Static IP” for the connection
mode. Check your ISP for the connection/setting details.
m If “Static IP” mode is chosen, more terms need to be filled before
any Internet access is available. Check your ISP for the
setting/configuration details.
m For some specific Encapsulation, you might need to fill in your “User
Name” and “Password”. Check your ISP for the
setting/configuration details.
m Click and select “Manual Setup” if you can’t find any available
parameters from the country list. Check your ISP immediately for the
setting/configuration details.
Dynamix UM-A

STEP 2. Click “Save Setting” after your choice.
Dynamix UM-A ADSL Router system will reboot and activate your setting. Click
“Back To Home” after the reboot process. Connection to the Internet is
available after the above process.
Dynamix UM-A