dynarex 10350 User manual

Reorder No. 10350
R181102
SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php
LIMITED LIFETIME
WARRANTY
Your Dynarex Product is warrantied to be free of
defects in materials and workmanship for the lifetime of
the product for the original purchaser. This item was
built to exacting standards and carefully inspected prior
to shipment. This Limited Lifetime Warranty is an
expression of our confidence in the materials and
workmanship of our products and our assurance to the
consumer of years of dependable service.
The Warranty shall not apply under the following
conditions: Problems arising from normal wear;
Problems arising from failure to adhere to the product
instructions; Problems arising from misuse, negligence,
accident or improper operation, maintenance or
storage; Problems arising from modifications or
unauthorized repairs, parts or attachments; Products
where the serial number has been removed or defaced;
Problems with non-durable components, such as rubber
accessories, casters, and grips, which are subject to
normal wear and need periodic replacement. Dynarex
shall not be liable for any consequential or incidental
damages whatsoever. Dynarex shall repair or replace
defective products at its option. The foregoing warranty
is exclusive and in lieu of other express warranties, if
any, including the implied warranties of merchantability
and fitness of a particular purpose. The remedy for any
violation of the implied warranty shall be limited to repair
or replacement of the defective product pursuant to the
terms contained herein.
If you have a question about your Dynarex device or
this warranty, please contact an authorized
Dynarex dealer.
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Freestanding
Toilet Rail
Manufactured for: Dynarex Corporation
10 Glenshaw Street • Orangeburg, NY 10962
USA • www.dynarex.com
Made in China

1. Stand the side frame (A) upright. Attach one
of the U-shaped support frames (B) in the
horizontal position to the bottom of base using
two thumb screws (C).
2. Attach the second U-shaped support frame (B)
to the side frame in vertical position using two
more thumb screws (C).
3. Repeat steps 3 and 4 for second side frame (A).
4. Hang magazine basket (D) on desired side
of frame.
Note: Check thumb screws periodically for tightness.
Tighten as necessary.
A. Side Frame
B. U-Shaped Support Frame
C. Thumb Screws
D. Basket
PARTS LIST ASSEMBLY INSTRUCTIONS
Weight Capacity: 300 lbs (135 kg)
B
B
C
C
A
D