dynarex 12960 User manual

Manufactured for:
Dynarex Corporation
10 Glenshaw Street
Orangeburg, NY 10962
USA • www.dynarex.com
Made in China
Reorder No. 12960
Universal
Q Assist Bar
User Manual

LIMITED LIFETIME WARRANTY
Your Dynarex Product is warrantied to be free of defects in
materials and workmanship for the lifetime of the product
for the original purchaser. This item was built to exacting
standards and carefully inspected prior to shipment. This
Limited Lifetime Warranty is an expression of our condence
in the materials and workmanship of our products and our
assurance to the consumer of years of dependable service.
The Warranty shall not apply under the following conditions:
• Problems arising from normal wear
• Problems arising from failure to adhere to the product
instructions
• Problems arising from misuse, negligence, accident or
improper operation, maintenance or storage
• Problems arising from modications or unauthorized
repairs, parts or attachments
• Products where the serial number has been removed or
defaced
• Problems with non-durable components, such as rubber
accessories, casters, and grips, which are subject to
normal wear and need periodic replacement
Dynarex shall not be liable for any consequential or inciden-
tal damages whatsoever. Dynarex shall repair or replace
defective products at its option. The foregoing warranty is
exclusive and in lieu of other express warranties, if any, in-
cluding the implied warranties of merchantability and tness
of a particular purpose. The remedy for any violation of the
implied warranty shall be limited to repair or replacement
of the defective product pursuant to the terms contained
herein.
If you have a question about your Dynarex device or this
warranty, please contact an authorized Dynarex dealer.
SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php
4 Universal Q Assist Bar (Reorder No. 12960)
R200601

2 Universal Q Assist Bar (Reorder No. 12960) Universal Q Assist Bar (Reorder No. 12960) 3
• Read the instructions carefully before installing.
• Before operating, ensure that the bed rails are assembled
and installed correctly as instructed. Ensure that all the
attaching hardware are tightened and that the bed rails
are securely in place. Inspect the hardware frequently to
make sure all the components are tightened securely.
• DO NOT use the bed rails as a handle for getting into or
out of the bed. This could result in personal injury and
damage to the bed rails.
• DO NOT apply side pressure to the bed rails. This could
deform or even break the bed rails.
• DO NOT use the bed rails as a push handle for moving
the bed. This could deform or even break the bed rails.
• DO NOT use the bed rails if proper installation cannot be
achieved. Contact your dealer or manufacturer.
RAIL OPERATION
PARALLEL RAIL ALIGNMENT: Lift up and rotate the bed
rail until it is parallel to the bed edge and release the bed rail.
Ensure it is securely locked in place.
PERPENDICULAR RAIL ALIGNMENT: Lift up and rotate
the bed rail until it is perpendicular to the bed edge, then
release the bed rail. Ensure it is securely locked in place.
MOUNTING INSTRUCTIONS
1.Beforeinstallingtherails,thebedshouldbeintheat
position. The carton should include 2 bed rails as shown:
2. Clamp the rail bracket over the edge of the bed deck with
the vertical sliding steel plate positioned on the inside of
the bed frame. Tighten the two Allen screws and rotate
the turn knob underneath the bracket clockwise until the
rail is secured in place. Repeat the procedure to install the
bed rail on the other side.
The rails can be positioned at the head or foot section.
WARNINGS