dynarex 10164 User manual

Your Dynarex product is warrantied to be free of defects
in materials and workmanship for the lifetime of the
product for the original purchaser. This item was built
to exacting standards and carefully inspected prior to
shipment. This Limited Lifetime Warranty is an
expression of our confidence in the materials and
workmanship of our products and our assurance to the
consumer of years of dependable service.
The Warranty shall not apply under the following
conditions: Problems arising from normal wear; Problems
arising from failure to adhere to the product instructions;
Problems arising from misuse, negligence, accident or
improper operation, maintenance or storage; Problems
arising from modifications or unauthorized repairs, parts
or attachments; Products where the serial number has
been removed or defaced; Problems with non-durable
components, such as rubber accessories, casters, and
grips, which are subject to normal wear and need
periodic replacement. Dynarex shall not be liable for any
consequential or incidental damages whatsoever.
Dynarex shall repair or replace defective products at its
option. The foregoing warranty is exclusive and in lieu of
other express warranties, if any, including the implied
warranties of merchantability and fitness of a particular
purpose. The remedy for any violation of the implied
warranty shall be limited to repair or replacement of the
defective product pursuant to the terms contained herein.
LIMITED LIFETIME WARRANTY Reorder No. 10164
R181205
SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Manufactured for: Dynarex Corporation
10 Glenshaw Street • Orangeburg, NY 10962
USA • www.dynarex.com
Made in China
Side Style
Walker
One Arm

PRE-ASSEMBLY ADJUSTING THE LEG EXTENSIONS
Read the following instructions before attempting
usage. If the directions are not clear, contact a
healthcare professional or technician.
To achieve the proper adjustments and usage
of the walker, consult with a therapist or other
medical professional.
1. Adjust leg extensions by depressing the snap button
through the appropriate extension and allowing it to
snap through the appropraite hole on the walker leg
frame.
NOTE: Make certain the snap buttons are fully
engaged into the adjustment hole of each leg frame
and are at the same height before using.
2. Repeat this procedure for each of the leg extensions.
WARNINGS
• Do not exceed the maximum user weight capacity
marked on the product.
• Use for stability and assistance while walking; do not
use to support full body weight.
• Make sure all snap buttons protrude all the way
through the holes.
• All leg extensions must be set at the same height.
Before using, double check that walker has been fully
opened and is level to the floor or ground.
• The walker is not designed to hold items. Hanging
objects on the walker could tip it over, potentially
causing personal injury or damage.
• Periodically inspect rubber tips for wear and tear. If
tips are damaged, replace them immediately.
OPENING / FOLDING THE WALKER
1. Grasp the Top Hand Grip of the walker. With other
hand, push the Pivot Lock Handle down towards the
Cross Brace.
NOTE: The Pivot Lock Handle MUST be directly on
top of the Cross Brace.
2. Reverse step 1 to close the walker.
CLOSE
Top Hand Grip
Pivot Lock Handle
Cross Brace
OPEN
Snap Button
Adjustment Holes
Leg Extension