E-Bench KH 2255 User manual

Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
www.kompernass.com
ID No.: KH 2255-09/06-V1
UK
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 1

CD Clock Radio KH 2255
Operating instructions
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 2

KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 3

j
2)
;
2@
wq
r
e
s
t
d
g
h
k
f
y
u
i
o
2!
a
l
2#
e-bench KH 2255
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 4

CD Clock Radio
Safety information 4
Delivery Contents 5
Intended Usage 5
Technical Data 5
Operating elements 6
Commissioning 6
Battery Back-up System in Case of Power Failures 6
Setting the Time 7
Radio operation 7
Use of the CD Player 7
Further Functions of the CD Player 8
Setting the Alarm Time and Alarm Type 8
Sleep timer 9
Cleaning 10
Disposal 10
Warranty & customer service 10
Read the operating instructions carefully before using the appliance for the first
time and preserve this booklet for later reference. Pass the manual on to whom-
soever might acquire the appliance at a later date.

KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 3

- 4 -

CD Clock Radio
Safety information
Important!
This clock radio employs a laser
beam. In order to avoid any risk
of injury or accident due to this
laser beam, the appliance may only
be opened by qualified specialists.
The appliances complies with the
international safety regulations
and the Directives of the European
Community. It also complies with
the currently applicable standards
on electrical safety and electro-
magnetic compatibility (EMC).
Caution:
In order to avoid the risk of electric
shock, the cover of the appliance
must not be removed. There are no
parts that can be serviced inside the
appliance. Always contact qualified
specialists in the event of problems
or faults.
This symbol warns the user of
hazardous voltages inside the
appliance.
This symbol is intended as a warning
that personal injury can occur if the
information given in the operating
instructions for the device is not
strictly observed.
Danger - Laser Beams!
The appliance is fitted with a
„Class 1 Laser“.
• Never open the device.
• Never attempt to repair the device.
There is invisible laser radiation
inside the device.
• Avoid all direct optical contact
with the laser beam, it could lead
to serious eye injuries.
Warning:
In order to avoid the risks of fire
and electric shock, the appliance
must not be exposed to rain or
moisture. The ventilation openings
must not be blocked or covered.
Important:
• Do not throw batteries into the fire.
• Do not immerse the device in water
and avoid splashes and droplets of
water entering the appliance. Do not
place any water/filled vessels (such as
e.g. flower vases) on the appliance.
Electrical Fast Transient (Burst)
Remark:
In case of misfunction due to
electrical fast transient (Burst),
just reset the product (reconnect
of power source may be required)
to resume normal operation.
ESD Remark:
In case of misfunction due to
electrostatic discharge just reset
the product (reconnect of power
source may be required) to resume
normal operation.
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 4

- 5 - 
A case of electrostatic discharge
occurs, for example, should someone
wearing shoes with plastic soles
walk over a carpet that also contains
plastic elements. Through the friction
of the shoe soles on the carpet a
charge is created in the body which
discharges itself as soon as one touches
an electricity conducting object, such
as for example a door knob or the
bodywork of a motor vehicle. Direct
contact is not required to effect a
discharge. It is sufficient to approach
the conducting item to within a few
centimetres. The charge can the dis-
charge itself over an electric arc. A
discharge is thus also possible through
plastic housing components.
Delivery Contents
CD Clock Radio
Operating Instructions
Warranty card
Intended Usage
• This device is suitable for the recep-
tion of radio stations and the playing
of audio CDs and is equipped with
individually variable alarm functions.
• Any other use or modification of the
appliance is considered improper use
and may present significant risks of
accidents.
• The manufacturer accepts no liability
for improper use.
Technical Data
Power supply: 230-240 V ~ 50 Hz
Backup battery: 2x 1.5 V Type AA bat-
tery (not included in
the scope of supply)
CD player: Frequency range
(+/- 3dB) 100 Hz to
16 kHz
Laser: = 760 nm
Pmax = 0.4 mW
Radio: FM 87,5 - 108 MHz
AM (MW)
530 - 1600 kHz
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 5

- 6 -

Operating elements
qButton STOP/TIME
wCD compartment
eButton Skip/Fast Search
forwards / Hour
rButton PLAY MODE
tIndicator light Repeat
yButtons ALARM I and ALARM II
uIndicator light Sleep
iButton SLEEP
oIndicator light Random
aButton SNOOZE
sTuning display
dVolume display
fButton ON/OFF
gIndicator light ON/OFF
1% Indicator light Program
jButton PROGRAM: Preprogramming
of CD titles
1& Button Skip/Fast Search backwards
/ Minute
lButton PLAY/PAUSE: Start of the CD
playback or brief interruption in the
CD playback
1( Volume controller
2) Tuning knob: for selecting the radio
station
2! Band selector switch: AM (MW) - FM
2@ Function selector switch:
CD - TUNER - BUZZER
2# FM antenna
Commissioning
This CD clock radio is operated with
230 - 240 Volt alternating current (AC),
50 Hz. It is additionally equipped with
a back-up system for the event of power
failures, for which two 1,5 V block batte-
ries (not included in the scope of supply)
have to be inserted.
➩Insert the plug of the power lead into
a suitable plug socket (AC voltage).
➩Place the batteries into the battery
compartment on the underside of
the appliance.
The use of an alkaline battery is
recommended. In order to ensure
optimum functioning, the battery
should be changed every 6 months.
Batteries are not charged in the
battery compartment!
Battery Back-up System in Case of
Power Failures
The batteries ensure that the clock conti-
nues to function even in the event of a
power failure. In order to prolong the
battery life, however, the time is not
shown on the display. If no battery has
been inserted, 12:00 appears on the dis-
play. This means that you have to carry
out the time and alarm settings again.
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 6

- 7 - 
Setting the Time
Setting the time when switching on the
first time:
➩Hold the button TIME qdepressed
to switch between the 12 hour and
24 hour modes.
➩The time flashes. Set the desired time
using the buttons MINUTE 1& and
HOUR e.
➩As soon as you press the button TIME
q, the setting is saved. The displayed
time no longer flashes.
Setting the time at some later point:
➩Hold the button TIME qdepressed
to switch between the 12 hour and
24 hour modes.
➩Press the button TIME q.The time
flashes. Set the desired time using
the buttons MINUTE 1& and HOUR e.
➩As soon as you press the button
TIME qagain, the setting is saved.
The displayed time no longer flashes.
Radio operation
1. Push the function selector switch 2@
to position TUNER.
2. Push the band selector switch 2! to
position FM (UKW) or AM (MW).
3. In order to achieve optimum recep-
tion, extend the FM antenna 2# to
its full length. For the AM waveband,
the appliance needs to be turned to
achieve optimum reception.
4. Switch on the appliance with the
ON/OFF button 1#. The indicator
light gcomes on when the appliance
is switched on. The volume display d
and frequency display 1! light up.
5. Set the desired volume with the
volume controller 1(.
6. Select the desired radio station
using the TUNING knob 2).
7. To switch off the radio, press the
button ON/OFF 1#. The indicator
light ON/OFF ggoes out.
Use of the CD Player
1. Open the CD compartment wby
hand and insert the CD (with the
label facing to the rear) into the
CD compartment and close the
CD compartment.
2. Push the function selector switch 2@
to position CD.
3. When the ON/OFF button 1# is pres-
sed, the total number of CD tracks
appears on the display. After a few
seconds, the time is displayed again.
4. Press the button PLAY/PAUSE lto
start the playback of the first track.
appears first on the display,
followed shortly thereafter by the
time again.
Use the button PLAY/PAUSE lalso
to briefly interrupt the playing of a
track. The playback can be resumed
by pressing button PLAY/PAUSE l
again.
5. Set the desired volume with the
volume controller 1(.
6. The playback can be stopped by
pressing button STOP q.
01
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 7

- 8 -

Further Functions of the CD Player
SKIP/FAST SEARCH 
➩Press e,to skip to the next track,
or press button eseveral times to
skip several tracks. Press 1& to jump
to the start of a track, or press button
1& several times to go back several
tracks. If 1& or eare held de-
pressed, certain points of a track can
be found quickly.
REPEAT t– Repeat playback /
RANDOM o – Random playback
➩Press the button Play Mode ronce
to repeat the playback of a particular
track. The REPEAT display tflashes.
➩Press the button Play Mode ronce
again to repeat the playback of the
whole CD. The REPEAT display t
lights up.
➩Pressing button Play Mode ragain
cancels this function. The REPEAT
display tgoes out.
➩The indicator light RANDOM o
lights up. The CD tracks are played
in random order.
➩Pressing button Play Mode ragain
cancels this function. The indicator
light RANDOM ogoes out.
PROGRAM 1^: For preprogramming
tracks in any order
1. Insert the CD.
2. Press button ON/OFF 1#. The total
number of tracks appears briefly
on the display.
3. Pressing the button PROGRAM j
again displays . The indicator
light PROGRAM hflashes.
p01
4. Select your track with the buttons
Skip/Fast Search e/k. Then press
the button PROGRAM jto save the
track. Proceed as described above to
program further tracks. A total of
20 tracks can be programmed.
5. Press the button PLAY/PAUSE 1*
to start the playback.
6. Press the button STOP qto stop
the playback.
If you wish to repeat the programming
later:
1. Press the button PROGRAM 1^ again
to activate the programming. The in-
dicator light PROGRAM hlights up.
2. Press the button PLAY/PAUSE 1*
to play the programmed tracks.
➩To cancel the programming, open
the CD compartment.
Setting the Alarm Time and
Alarm Type
With this appliance you can set two
different wake-up times that can be
used individually or simultaneously:
• AL 1 or AL 2
• or AL 1 and AL 2
Setting the alarm time
• Alarm (AL 1):
Press the button ALARM I y. Press
the buttons Minute 1& and Hour eto
set the desired alarm time. The wake-
up time is stored as soon as you press
the button ALARM I y. The indicator
for Alarm I appears on the display.
If you wish to switch off the alarm,
press the button ALARM I y.
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 8