Eartec EVADE User manual

Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to
the instruction.
Recycle your products: The WEEE logo appears on the product to indicate that this product
must not be disposed of or dumped with your other household wastes. You are liable to
dispose of all your electronic or electrical waste equipment by transporting to an appropriate
collection point for recycling of such hazardous waste.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning: This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-
located or operating in conjunction with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Warranty
Eartec items are warranted against defects in material and/or factory workmanship
for a set period from the date of purchase. Standard repairs due to misuse or wear
and tear, as well as replacement parts including but not limited to batteries, padding,
USB cable, etc. are excluded. Shipping to Eartec is at customer’s expense, Eartec will
pay for return ground shipping if the product warranty applies to the repair. Call for
details.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA
(return authorization) number: 1.800.399.5994.
General Service
All repair work will be performed for the cost of replacement parts and return
shipping from the Eartec factory.
Service / Eartec www.eartec.com
145 Dean Knauss Drive 1.800.399.5994
Narragansett, RI. 02882
The EVADE
Full Duplex Wireless Systems

IMPORTANT
Systems include one Headset labeled “MAIN”.
This MAIN headset must be
Turned “ON” to link the corresponding Remote headsets.
Battery
Boom swivels over the top
270º Mic can be worn on
left or right.
Microphone mutes
automatically when boom
is set to “UP” position.
AutoMute
Operation
Charging
1) Batteries are charged via the
multi-charger.
2) Insert the batteries making sure
the contacts are properly
aligned.
3) RED: Charging, GREEN: Fully
charged.
Each new EVADE series system arrives pre-programmed. Should you need to add to
your system please visit eartec.com/EVADE-programming.
ON/OFF Power Button
1) Click the power button on the MAIN headset.
Flashing green LED indicates power is ON.
2) Press the power button on the REMOTE
headset(s).
3) The LED on all headsets will flash & then turn
solid green indicating headsets have linked.
Note: to turn off, press and hold the power button
for 4-5 seconds. When LED blinks red, release.
Set Volume
EVADE feature five volume settings. Click UP or
DOWN buttons to adjust. Audible tone indicates low
or max volume.
Microphone Placement
Position the microphone one finger-width distance
from your mouth. Speak into the front of the
microphone, indicated by painted arrow and “Talk”.
ON / OFF Power
Volume UP / DOWN
Installation
1) To eject battery from headset,
press the release button located
at the top of the compartment.
2) To insert battery into headset,
snap into place.
Low Indicator
1) A repetitive beep (20 sec.
intervals) indicates low power.
Battery should be charged or
replaced.
Battery Care
1) To preserve optimum charge level remove battery from
compartment when not in use.

Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to
the instruction.
Recycle your products: The WEEE logo appears on the product to indicate that this product
must not be disposed of or dumped with your other household wastes. You are liable to
dispose of all your electronic or electrical waste equipment by transporting to an appropriate
collection point for recycling of such hazardous waste.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning: This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-
located or operating in conjunction with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Warranty
Eartec items are warranted against defects in material and/or factory workmanship
for a set period from the date of purchase. Standard repairs due to misuse or wear
and tear, as well as replacement parts including but not limited to batteries, padding,
USB cable, etc. are excluded. Shipping to Eartec is at customer’s expense, Eartec will
pay for return ground shipping if the product warranty applies to the repair. Call for
details.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA
(return authorization) number: 1.800.399.5994.
General Service
All repair work will be performed for the cost of replacement parts and return
shipping from the Eartec factory.
Service / Eartec www.eartec.com
145 Dean Knauss Drive 1.800.399.5994
Narragansett, RI. 02882
The EVADE
XTreme
Full Duplex Wireless Systems

IMPORTANT
Systems include one Headset labeled “MAIN”.
This MAIN headset must be
Turned “ON” to link the corresponding Remote headsets.
Battery
oThe microphone mute feature is controlled by
the button located on the earcup, labelled MIC.
oPressing the Mic button illuminates the nearby
power button to red, indicating the microphone
signal is muted.
oPressing the button again reactivates the mic gain
and the red LED off.
AutoMute
Operation
oBatteries are charged via the multi-charger.
oInsert the batteries making sure the contacts are properly aligned.
oRED: Charging, GREEN: Fully charged.
Each new EVADE series system arrives pre-programmed. Should you need to add to
your system please visit eartec.com/EVADE-programming.
oClick the power button on the MAIN headset. Flashing green
LED indicates power is ON.
oPress the power button on the REMOTE headset(s).
oThe LED on all headsets will flash & then turn solid green
indicating headsets have linked.
Note: to turn off, press and hold the power button for 4-5
seconds. When LED blinks red, release.
ON / OFF Power
Volume UP / DOWN
oTo eject battery from headset, press and slide
door down to open battery compartment.
oInsert battery as shown, close battery
compartment and latch to secure door.
oA repetitive beep (20 sec. intervals) indicates low
power. Battery should be charged or replaced.
oTo preserve optimum charge level remove battery
from compartment when not in use.
Charging
Installation
Low Indicator
Battery Care
ON/OFF Power
Button
Set Volume
Microphone
Placement
oPosition the microphone one finger-width distance from your
mouth. Speak into the front of the microphone, indicated by
painted arrow and “Talk”.
oEVADE Xtreme feature four volume settings. Click UP or DOWN
buttons to adjust. Audible tone indicates low or max volume.