
4
When using any electrical appliance, including this infrared heater, basic safety
precautions must be followed to reduce the risk of re, shock, or injury. Please
read all instructions before using this appliance:
• This heater becomes extremely hot when operating. To minimize the risk
of burns or injury, do not touch any part of this heater when in use. Allow
adequate time for the appliance cool down before transporting or cleaning. If
applicable, use handles to transport.
• Keep all combustible items, such as clothes, curtains, or rugs, at least 3 feet
away from all sides of the appliance.
• Be cautious of your surroundings when the heater is in use. Ensure children
and pets are at least 5 feet away from this product.
• DO NOT operate this heater if it malfunctions, has been dropped, or any cords
or plugs are damaged. Discard heater or send the product to an authorized
service facility for inspection and/or repair.
• DO NOT run the cord under any carpeting, rugs, furniture, or appliances.
Ensure the cord is neatly placed away from areas that are high-trac and may
be tripped over.
• DO NOT insert any foreign objects into the ventilation system. This may result in
a re, shock, or damage to the heater.
• To prevent res, do not block any air intakes or exhausts with any items, like
newspapers, cloths, or curtains. Do not use this appliance on top of soft
surfaces, such as beds or rugs.
• DO NOT place any open ame sources on this appliance, such as a lit candle.
• DO NOT place this appliance near any combustible materials, such as gas,
paint, or ammable liquids.
• DO NOT position this unit directly below a wall outlet.
• This heater becomes extremely hot when in use. DO NOT touch any part of
this appliance.
• Only use this heater as described in the manual. Misuse is not recommended
by the manufacturer. Be aware that misuse may result in re, shock, or injury.
• Only plug the heater directly into a grounded outlet with protective connection.
Do not use this appliance with an extension cord or power strip.
• Conrm the voltage on the appliance and outlet are compatible.
• Ensure heater is unplugged after each use.
• Connect to properly grounded outlets only.
• To disconnect the heater, turn the switch to the “OFF” position. Then, remove
the plug from the outlet. Allow the product to cool down completely.
SAFETY GUIDE