Eaton PXS24 Series User manual

1
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Technical Manual age 3
XS24… Standard
Technisches Handbuch Seite 9
XS24… Standard
Manuale Tecnico agina 16
XS24… Standard
Manuel technique age 22
XS24… Standard
en
de
www.eaton.com/recycling
it
fr

2
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Technical Manual
XS24… Standard
CONTENTS (EN)
Technical Manual ................................................................................................................................................................... 4
Hazard warnings ................................................................................................................................................................ 4
The XS24 system .............................................................................................................................................................. 4
The “ XS24E… Standard“ series ......................................................................................................................................... 5
Input terminals ................................................................................................................................................................... 5
Stand-alone operation ....................................................................................................................................................... 5
Temperature rise ............................................................................................................................................................... 5
Communication .................................................................................................................................................................. 6
Group error messages ........................................................................................................................................................ 6
Technical data .................................................................................................................................................................... 7
INHALT (DE)
Technisches Handbuch ........................................................................................................................................................ 11
Warnhinweise .................................................................................................................................................................. 11
Das System XS24 ............................................................................................................................................................ 11
Die Serie „ XS24S… Standard“ ......................................................................................................................................... 12
Eingangsklemmen ............................................................................................................................................................ 12
Stand alone ...................................................................................................................................................................... 12
Erwärmung ....................................................................................................................................................................... 12
Kommunikation ................................................................................................................................................................ 13
Summen-Fehlermeldung ................................................................................................................................................. 13
Technische Daten ............................................................................................................................................................. 14

3
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
CONTENUTO (IT)
Manuale Tecnico .................................................................................................................................................................. 18
Avvertenze di pericolo .................................................................................................................................... 18
Il sistema XS24 .............................................................................................................................................. 18
La serie “ XS24…Standard”............................................................................................................................. 19
Morsetti di alimentazione ............................................................................................................................... 19
Funzionamento indipendente ......................................................................................................................... 19
Riscaldamento ................................................................................................................................................. 19
Comunicazione ................................................................................................................................................ 20
Messaggi di errore di gruppo .......................................................................................................................... 20
Dati tecnici ...................................................................................................................................................... 21
CONTENT (FR)
Manuel technique ............................................................................................................................................................... 25
Attention ......................................................................................................................................................... 25
Le système XS24 ............................................................................................................................................ 25
Série « XS24... Standard » ............................................................................................................................. 26
Bornes d’entrée .............................................................................................................................................. 26
Utilisation séparée .......................................................................................................................................... 26
Échauffement .................................................................................................................................................. 26
Communication ............................................................................................................................................... 27
Messages d’erreur groupés par module ......................................................................................................... 27
Données techniques ....................................................................................................................................... 28

4
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Technical Manual (EN)
XS24… Standard
This manual describes the functioning of the Standard-series XS24 and the “stand-alone” operation. The XS24 system
allows for many possible combinations, which are described in detail in the “ XS24 system” manual.
Up-to-date information and the most recent version of this document are available at:
Eaton.com/ XS24
We recommend downloading the latest versions of all relevant documents prior to planning.
HAZARD
WARNINGS
The XS24 series has been developed specifically for overload-protected and short-circuit proof 24 V
power supply units, of the type commonly used in automation applications.
Whenever the modules are switched on (i.e. when operating voltage is applied) they are live (provid-
ed that the slide switch at the front is set to “I”)! If the unit has tripped (following an overload or
short circuit), switching it off and back on again will reset the trip.
lease refer to the technical data of the individual components, particularly the operating voltage and
the rated current.
THE XS24
SYSTEM
There are many different options for combining the various components of the XS24 series. To avoid
restricting this flexibility, two separate series with different functionalities are available.
1.) Economy: XS24E-…
2.) Standard: XS24S-…
Feature Economy Standard
Rated current 0-10A 0-16A
overload protection x x
Modular design x x
3 load outputs x x
ush-in terminals x x
Busbar (+/-) x x
Local status LED x x
Local control (on/off/reset) x x
Subsequent control x
Digital output (OK/tripped) x
Digital input (on/off/reset) x

5
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
THE “ XS24E…
STANDARD“ SE-
RIES
This manual describes the following models:
XS24S-e2/F/ORT-IT 2A fix with input terminals XS24S02A001
XS24S-e4/F/ORT-IT 4A fix with input terminals XS24S04A001
XS24S-e6/F/ORT-IT 6A fix with input terminals XS24S06A001
XS24S-e8/F/ORT-IT 8A fix with input terminals XS24S08A001
XS24S-e10/F/ORT-IT 10A fix with input terminals XS24S10A001
XS24S-e13/F/ORT-IT 13A fix with input terminals XS24S13A001
XS24S-e16/F/ORT-IT 16A fix with input terminals XS24S16A001
XS24S-e2/F/ORT 2A fix without input terminals XS24S02A002
XS24S-e4/F/ORT 4A fix without input terminals XS24S04A002
XS24S-e6/F/ORT 6A fix without input terminals XS24S06A002
XS24S-e8/F/ORT 8A fix without input terminals XS24S08A002
XS24S-e10/F/ORT 10A fix without input terminals XS24S10A002
XS24S-e13/F/ORT 13A fix without input terminals XS24S13A002
XS24S-e16/F/ORT 16A fix without input terminals XS24S16A002
IN UT
TERMINALS
Articles marked “IT” (= “input terminal”) can be used individually (> see section on “stand-alone op-
eration”) or in combination with other articles. Should you wish to combine several components
(including for mixed operation), please consult the XS24 system manual.
STAND-ALONE
O ERATION
An individual XS24S-…/IT element can be used on its own to protect a channel. This requires the
selection of a model with input terminals (“IT”), as models without input terminals are supplied via
the busbar only.
TEM ERATURE
RISE
To ensure thermal protection, modules with high amperage should not be placed directly next to one
another, wherever possible. lease also refer to the technical data of the individual components.
De-rating: If three or more 16A modules are placed directly next to each other (in the specified tem-
perature range), these must be de-rated to 13A. For this type of application, we therefore recom-
mend using 13A modules instead. If 16A modules are to be used, please leave 1H (18 mm) between
each of the modules for cooling purposes.

6
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
COMMUNICATI-
ON
“In” (Connection 7 and 8 /+24VDC) is used for control purposes:
Low: Module is live
High: No voltage at output
Note: The input is equipped with an internal pull-up resistor, so that the module is live without any
external connection.
Reset (remotely): Low > High
Note: An “off” signal always takes precedence (irrespective of whether it originates at the selector
switch at the front or at the “In” input), meaning the module will remain inactive until both signals
have switched to “on”!
“Out” (Connection 5 and 6 / +24VDC) trip signal:
Low: Module is live, no error
High: Module has tripped or was switched off manually
The GND (Connection 9 / -24VDC) connection at the communication port is intended for communica-
tion purposes only and shall therefore not be loaded with currents over 200mA!
The communication port inputs and outputs conform to IEC/EN61131-2. It is therefore possible to
connect the module directly to a LC, or to use it to control loads.
Note: The communication link is implemented via a dedicated port that is not available in the “Econ-
omy” series.
For more information and examples ow to communicate read tec nical manual PXS24…System.
GROU ERROR
MESSAGES
If individual error messages are not required, the trip outputs (“Out”) of several XS24 modules can
be connected. A total of at most 30 modules can be connected in this way.
Note: This feature cannot be used simultaneously with the subsequent control.

7
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
TECHNICAL DATA Marking CE
Certification UL508 + UL2367 (section 10 and 12)
roduct standard Applicable sequences of:
EN60947-1, EN60947-5-1, EN61009-1,
EN61131-2 and EN61000-4-2
Details see In-House Standard WN 1008
Electrical:
Operating voltage U
B
24V DC (16….30 V DC)
Rated current I
N
Fix; 2, 4, 6, 8, 10, 13, 16A
Current switch-off
(in case of overload or short circuit)
Typically 1.3 x I
N
with active current limitation to
1,25 x l
N
Switch-off times for
electronic switch-off see time / current table
Capacitive loads Up to 20,000 μF
Inductive loads I
n
≤ 6A … τ
max
≤ 60ms
6A < I
n
≤ 10A … τ
max
≤ 12ms
10A < I
n
≤ 16A … τ
max
≤ 7,5ms
Service life when used as a relay see time / current table
Mechanical:
Number of channels 1
Width 17.5 (1 H )
Height 92.5mm
Depth 119.2mm
Input terminals (optional) 3 x LINE (+) and 3 x GND (-)
Output terminals 3 x LOAD (+) and 3 x GND (-)
Terminal type ush-in terminals
Terminal capacity 2.5mm² (flexible with ferrule)
4mm² (rigid)
Communication port 2 x remote signaling output (internally linked)
2 x remote signaling input (internally linked)
1x GND
Terminal type ush-in terminals
Terminal capacity 1 mm² (flexible with ferrule)
1.5mm² (rigid)
Busbar LINE (+) and GND (-); max. 80A
In different lengths up to 1m
Assembly Snap-fit onto the TH35 mounting rail (EN 60715)
Status LED Two-colored; Green = OK; Red = Tripped
Off = channel not in operation
Slide switch On/Off/Reset

8
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Remote signaling output Tripped; via communication port
(in accordance with IEC 61131-2), class: 0.1A;
Type1/Type2 and Type3 digital inputs
Max. 30 XS24V units can be connected simultane-
ously.
External signal sources up to 0.2A at 24V. (EATON
RMQ series,…)
Remote signaling input On/Off/Reset; via communication port
(in accordance with IEC 61131-2) Type 1/Type 3; max.
30 XS24V units can be connected simultaneously.
Subsequent control Via communication port
Text field 17.5 x 6mm
Degree of protection I 20
Ambient temperature -30°C to 55°C
Storage temperature -40°C to 100°C :
Humidity 96h/95% rel. At 40°C acc. to IEC 600068-2-78 non-
condensing
Switch-off times:
Rated Current Switc -off time
(typically)
active current
limitation
Service life w en used as a relay
t
on
= 0.05 s / t
off
= 10 s
I
N
2A 470ms 1.25 x I
N
>10,000,000
4A 280ms 1.25 x I
N
>10,000,000
6A 170ms 1.25 x I
N
>10,000,000
8A 110ms 1.25 x I
N
400,000
10A 90ms 1.25 x I
N
10,000
13A 80ms 1.25 x I
N
no usage as relay - only protection
16A 70ms 1.25 x I
N
no usage as relay - only protection

9
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Circuit diagram and terminal assignment (for models with input terminals):
1) Load +24VDC
2) Line +24VDC
3) Load -24VDC
4) Line -24VDC

10
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA- XS24_Standard.docx/10.2018e/150501507/IL019188ZU
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / rinted in Austria
Circuit diagram for models without input terminals: