Eaton CRCA-00/08 Manual

1
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio

Инструкция по монтажу
Montagehandleiding

Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Kullanma Talimatı
Инструкција за монтажу
Intruksjonsblad
Монтажна інструкція
ت ا ة 
xComfort Room Controller Touch
CRCA-00/08 ... CRCA-00/13
868.3 MHz
IP20IP20
0oC
+C*40o
-25 C
o
+70 C
o
Technical Data / Technische gegevens / Tekniske data /
Technische Daten / Technická data
Power Supply
Batteries 3V via 2x LR03 (AAA)
External power supply 12-24 VDC/AC
Internal Temperature sensor
Range 0 - 40oC
Accuracy + 0.5oC
External Temperature sensor PT-1000
Humidity sensor
Relative humidity range 5 - 95%
Accuracy + 5% rH
Connections
Stripping length 6 mm
Cross section
Solid core 0.14 - 0.5 mm²
Stranded core 0.2 - 0.5 mm²
Dimensions (H x W x D) 55 x 55 x 21 mm
Controller Type Color
CRCA-00/08 Temperature, Humidity Pure white
CRCA-00/09 Temperature, Humidity Anthracite
CRCA-00/10 Temperature, Humidity Traffic white
CRCA-00/11 Temperature, Humidity Alpine white
CRCA-00/12 Temperature, Humidity Signal white
CRCA-00/13 Temperature, Humidity Jet black
Temperature
Humidity
External (Floor)
Temperature Sensor
Optional: External
Power Supply 24V
AC/DC
+
2x
LR03 AAA
Compatible
with
55x55mm
MRF Version 2.53
RM Version V41c
SHC-RF Version 2.20
ECI-RF Version 2.10
USB-RF Version 2.10
136211189_136211189 08.07.2019 11:51 Seite 1

2
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
3
1a 1b
2
4
++
Click
Click
External Power Supply
(Floor) Temperature Sensor
Power Supply
CMMZ-00/12
CMMZ-00/13
Temperature Sensor
CSEZ-01/01
CSEZ-01/36
Merten Gira Busch Jaeger Jung Berker Siemens Elko Kopp
1-M Standard 55 Carat* AS S.1 Delta line RS16 Alaska
Atelier M E2 Pur Edelstahl* A 500 B.1 Delta vita Plus
M-Smart Event Solo* A plus B.3 Delta miro
M-Arc Esprit Future* A creation B.7 Glas Delta profil**
M-Star Profil 55 Future linear*
M-Plan E22 CZ Future*
M-Plan II Busch-balance® SI
M-Plan Metall
M-Plan Glas
* only with intermediate frame Busch&Jäger
** only with intermediate frame Siemens
Mounting / Montage / Montering / Montage / Montáž
Wiring diagram/ Aansluitschema / Koblingskjemaer / Anschlussplan / Schéma zapojení
(Optional / Optioneel / Valgfri / Optional / Volitelné):
- External power supply / Externe voiding/ Ekstern strømforsyning / Externe Stromversorgung / Externí napájení
- (Floor) Temperature sensor / (Vloer) Temperatuur sensor / (Gulv) Temperatur sensor / (Boden) Temperatursensor /
(Podlahové) Teplotní čidlo
LR03 AAA-Micro 1,5V
136211189_136211189 08.07.2019 11:51 Seite 2

3
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Reference 21 C
Reference - RC = Offset
!
123
46
5
8
7910
Offset / Offset / Offset / Abgleich / Offset:
Positioning / Positionering / Plassering / Positionierung / Umístění:
136211189_136211189 08.07.2019 11:51 Seite 3

4
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Press
> 5 Sec.
Back to factory default /
Terug naar fabrieksinstellingen /
Tilbake til fabrikkinstillinger /
In Auslieferungszustand zurücksetzen /
Obnovit tovární nastavení
Assign or Remove device /
Apparaat toewijzen of verwijderen /
Tildele eller fjerne enheten /
Zuweisen oder Entfernen von Geräten /
Přiřazení nebo odebrání zařízení
Stop basic mode or cancel operation /
Stop basic mode of actie annuleren /
Stopp basic mode eller avbryte operasjonen /
Stoppe Basic mode oder Vorgang abbrechen /
Ukončit základní režim nebo zrušit operaci
Select Device / Selecteer apparaat / Velg enhet /
Gerät auswählen / Vybrat zařízení
Device; Function; Type / Apparaat; Functie; Type / Enhet; Funksjon; Type / Gerät; Funktion; Typ / Zařízení; funkce; typ
Heating; Heating Actuator / Verwarming; Verwarmingsactor / Oppvarming; Varmeaktuator /
Heizung; Heizungsaktor / Topení; Aktor topení
Heating; On/Off Actuator / Verwarming, Aan/Uit Actuator / Oppvarming; På/Av-aktuator /
Heizung; Ein/Aus Aktor / Topení; Zapnuto/Vypnuto aktor
60-59-58...
60 Sec.
>5 Sec.
Timeout > 30 Sec.
Cleaning / Reinigen / Rengjøring / Reinigung / Čištění:
Basic Mode:
Start basic mode / Start basic mode / Start Basic Mode / Starte Basic Mode /
Spustit základní režim
Stop basic mode /
Stop basic mode /
Stopp Basic Mode /
Stoppe Basic Mode /
Ukončit základní režim
136211189_136211189 08.07.2019 11:51 Seite 4

5
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Assign or remove device / Apparaat toewijzen of verwijderen / Tildele eller fjerne enheten /
Zuweisen oder Entfernen von Geräten / Přiřazení nebo odebrání zařízení
Select
Device
Assign or
Remove
Actor in
Program
mode
Confirm
Stop
Actuator
Program
mode
Back to factory default / Terug naar fabrieksinstellingen / Tilbake til fabrikkinstillinger / In
Auslieferungszustand zurücksetzen / Obnovení továrního nastavení
Select
Confirm
Cancel
Selected device is blinking /
Geselecteerde apparaat knippert /
Valgt enhet blinker / Ausgewähltes
Gerätsymbol blinkt / Vybrané
zařízení bliká
CON: Assign device / Apparaat toewijzen /
Tildele enheten / Gerät zuweisen /
Přiřazení zařízení
DEL: Remove device / Apparaat verwijderen /
Fjerne enheten / Gerät entfernen /
Odebrání zařízení
1
1
2
3
4
5
2a
2b
136211189_136211189 08.07.2019 11:51 Seite 5

6
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Week program active
Floor regulation active
Low battery
Status info
Frost protection
Night / Standby
Economy
Day / Comfort
Active operation mode
Frost protection
Night / Standby
Economy
Day / Comfort
Select operation mode
Temperature
Humidity
Clock
Outdoor temperature
Select view
Heating mode
Cooling mode
Off
Select
Enter edit mode
Heating
Cooling
Ventilation
Request status
2 virtual pushbutton
Optional
Program ON
Program OFF
Select week program
Temporaty adjust temperature
Enter operation mode - menu
Quick User Guide / Quick User Guide / Hurtigveiledning /
Schnellanleitung / Stručný návod k obsluze
Main menu
Hoofdmenu / Hovedmeny /
Hauptmenü / Hlavní menu
Operation mode - menu
Operation mode -menu / Driftsmodus - menyen /
Betriebsart - Menü / Provozní režim - nabídka
136211189_136211189 08.07.2019 11:51 Seite 6

7
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Frost protection
Night / Standby
Economy
Day / Comfort
Edit operation mode
Edit week program
Leave edit mode
Change set-point
Edit mode - menu
Edit mode - menu /Redigeringsmodus - menyen /
Edit-Modus - Menü / Editační režim – nabídka
EN: For the extended user guide and other detailed information about xComfort visit
www.eaton.eu/xcomfort or www.xcomfort.com or use the QR-code
DE: Für das erweiterte Benutzerhandbuch und detaillierte Informationen zum xComfort System
besuchen Sie www.eaton.eu/xcomfort oder www.xcomfort.de oder verwenden Sie den QR-code
AT: Für das erweiterte Benutzerhandbuch und detaillierte Informationen zum xComfort System
besuchen Sie www.eaton.eu/xcomfort oder www.xcomfort.at oder verwenden Sie den QR-code
NO: For en mer omfattende brukerveiledning og mer informasjon om xComfort, besøk
www.xcomfort.no eller ww.eaton.eu/xcomfort, eller bruk QR-koden
NL: Voor de uitgebreide gebruikershandleiding en meer gedetailleerde informatie over xComfort ga
naar www.eaton.nl/xcomfort of www.xcomfort.nl of maak gebruik van de QR-code
CZ: Pro podrobnější návod k obsluze a další podrobné informace o xComfort návštěvy
www.eaton.eu/xcomfort nebo www.xcomfort.cz nebo použijte QR kód
136211189_136211189 08.07.2019 11:51 Seite 7

8
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-crca-00-08/09.qxd/07.2019j / IL019122ZU / 136211189
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2016
Doc.Id.:
CRCA-00xx_020818
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility as the manufacturer that the product (family)
Eaton - Room Controller Touch,
CRCA-00/xx (contains RF-Modul CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010, EN
50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +
A2:2013, EN 62479:2010, EN 50581:2012
02.08.2018
136211189_136211189 08.07.2019 11:51 Seite 8