Echo Bear Cat CH500H(74500) User manual

MOBILE WORKSTATION!
5" & 8" Skid Steer Chippers!
Model Hydraulics Feed Opening Chipper Feed Chipper Operating
Size Capacity System Disc Weight
CH500H Standard or 5.5"x7" 3"* hydraulic 20" x 1.25" 1145
(74500) high-ow**      140lbs 
CH800H High-ow*** 9"x9" 5"*  hydraulic  30"x1.25" 1525 
(74800)       275lbs
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-ow requires a mimimum of 15 gallons per minute (GPM) hydraulic oil ow
***High-ow requires a mimimum of 25 GPM hydraulic oil ow
Model CH500H (74500)
The four-position valve easily controls
the hydraulic feed roller
The chipper has two mounts, so it can be
set to feed in front or to the curb side
Built-in hydraulic jack makes feed roller
maintenacnce quick and easy.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O.Box849,WestFargo,ND58078
Email:[email protected]
Fax:701.282.9522

5" & 8" Skid Steer Specs
Models CH500H (74500), CH800H (74800)
SKID-STEER MOUNT
•CH500H(74500)tsskidsteerswithstan-
dardorhigh-owhydraulics
•CH800H(74800)tsskidsteerswithhigh-owhydraulics
•Twomounts,sochippercanbemountedwithfeed
tablefacingforwardortothecurbside
•EasytoattachjustconnectchippertotheSAEJ2513Quick-
Tach,attachthehydraulichoses,andyouarereadytogo
HYDRAULIC FEED
•Four-positionmanualvalvecontrol(Re-
verse-Neutral-Forward-Reverse).
•Innitespeedsettingswithturnofahandle
•Automaticfeedcontrol,whichslowsthefeed
rollerifthediscstartstoslowdown
CHIPPER DISC
•CH500H(74500)hasa20"x1.25"[51cmx
3.175cm]140lb.[63.5kg]disc.Machined.
•CH800H(74800)hasa30"x1.25"[76cmx3.175cm]
275lb.[125kg]disc.Machined&Balanced.
FOUR CHIPPING BLADES
•Reversibleheat-treatedchippersteelblades,withchromecontent.
•Bladesaremounted90degreestoeachother
forsmootheroperationandlessvibration.
FOUR EDGE ADJUSTABLE ANVIL/CUTTER BAR
Toinsuregoodchippingability.
CONTINUOUS CHIPPING SIZE
•CH500H(74500)hasa5.5"x7"[14cmx18cm]chipperopen-
ingforsidelimbs,andwilchipupto3"limbscontinuously.
•CH800H(74800)hasa9"x9"[23cmx23cm]chipperopen-
ingforsidelimbs,andwillchipupto5"limbscontinuously.
EASY ACCESS DISC
Thediscisaccessiblethroughthehingeddisccov-
er,whichexposesonehalfofthediscforeasyaccess
tothechipppingbladesandforeasycleanout.
INTEGRATED BLOWER
Putthechipswhereyouwantthemwiththededicatedblower.
360°rotating,6"[15cm](74500)or8"[20cm](74800)di-
ametersteeltubingwithadjustabledeectorcapallowsyou
toputthechipswhereyouwantthemthersttime.
HEAVY-DUTY CONSTRUCTION
OTHER FEATURES:
•Slip-resistantsteppadsforentryorexitfromskid-steer
•Weatherproofowner'smanualbox
Weight
•ModelCH500H(74500)–1145lbs[520kg]
•ModelCH800H(74800)–1525lbs[693kg.]
Safety
•Safetychainsstandard
•MeetsallapplicableISOandCEsafetystandards.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O.Box849,WestFargo,ND58078
Email:[email protected]
Fax:701.282.9522