Echo CH6614 (71620) User manual

GETS THE JOB DONE!
6" Chippers!
Model Engine Size Chipper Feed Feed Start Weight Tires
(LxWxH) Capacity System Opening (Lbs.) Base
CH6614 Honda 76"x80"x90" 6" Manual feed 9"x9" Electric 1445 5.30" x 12"
(71620) 614cc pneumatic
CH6614H Honda 93"x80"x90" 6" Hydraulic 9"x9" Electric 1865 5.30" x 12"
(72620) 614cc pneumatic
Option:
73244 Digital Programmable Feed Sensor and Hour Meter for Model 72620
Model CH6614H (72620)
Chipper is pre-wired for the optional
(73244) digital programmable feed
sensor and hour meter. This option
is available only on the CH6614H
(72620).
“We've always been very satised
with ECHO Bear Cat equip-
ment. It is very durable and we
would recommend it to anyone.”
Ron Williams Orangeville, Ontario
Has a 360-degree rotating bed, you
can feed the hopper from any direc-
tion. These towable chippers come
standard with a torsion axle suspen-
sion.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
237 12th St. NW • P.O. Box 849, West Fargo, ND 58078
Email: [email protected]
Fax: [phone]

6" Chipper Specs
76cm [30"] DIAMETER DISC
1.25" [76cm] diameter by 1.25" [3.2cm] thick rotor disc
that weighs 275 lbs. [125kg]. Machined to balance. Disc
turns at 1500 RPM. .75" [4.45cm] diameter rotor shaft.
FOUR CHIPPING BLADES
All have the same reversible chipper blades, heat
treated chipper steel with a chrome content
ENGINE
Honda 20 hp engine with electric start
6.6 gallon [25 liters] fuel tank
Fuel consumption is 1.92 gal. [7.27 liters] pH at full load
MANUAL BELT ENGAGEMENT LEVER
ON TOWABLE MODELS
FEED SYSTEM
45-Degree chipping blade edge angle pulls the logs and
limbs into the 71620. The Hydraulic feed helps guide
wood into the chipping mechanism on model 72620.
EASY ACCESS DISC
The rotor is accessible through the hinged disc cov-
er, which exposes one half of the disc for easy access
to the chipping blades and for easy clean out.
HEAVY-DUTY CONSTRUCTION
.375" [9.5mm] thick steel face plate on the disc housing
.25" [6.35mm] thick steel on the wrap
around with welded construction
INTEGRATED DISCHARGE BLOWER
Put the chips where you want them with the dedicated blower.
360° rotatable, 8" [20cm] diameter steel tubing with adjust-
able spout cap allows you to put the chips where you want
them the rst time. Discharge chute is 95" [2.41m] high.
FEED CHUTE
Has an opening size of 30.25" x 30.75" [76.8cm x 78.1cm], tray 28.31"
[71.9cm] off the ground. Feed table is 38" [96.5cm] long.
MAXIMUM FEED SIZE - 6"
ADJUSTABLE JACK (Towable Models Only)
Roller wheel with 850 lbs. [372 kg] rating. Adjustable jack alows one
person to easily maneuver the chipper around and hook up to a ve-
hicle.
HIGHWAY TOWABLE
68" [172cm] tread width (center to center), 5.30" x 12" [13.5cm
x 30.5 cm] tires, coupled with torsion axle suspension en-
ables the chipper to be easily towed down the highway. Light
kit, and safety chains are standard, with 2,250 lb. axle.
DIMENSIONS:
• CH6614 (71620) - Length 76" • Width 80" • Height 90"
• CH6614H (72620) - Length 93" • Width 80" • Height 90"
Weight
• CH6614 (71620) – 1445 lbs
• CH6614H (72620) – 1865 lbs
Safety
• Meets all ANSI safety standards.
• 12 Volt Safety and Directional Lighting
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
237 12th St. NW • P.O. Box 849, West Fargo, ND 58078
Email: [email protected]
Fax: [phone]