eControls Comfort365 C365T11 User manual

User Manual
Model C365T11 and C365T21
365
Comfort
Rev A Jan 2016
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
HEAT
Schedule
AUTO
FANMENU MODE
Heat
Set To
SYSTEM
AM
UP/DOWN Keys.
Displays the downstairs (Inside)
or upstairs (Inside2) temperature.
Displays the Thermostat Mode
HOLD, SCHEDULE or VACANT
Displays time, day and schedule
MORNING, DAYTIME, EVENING
or NIGHT
MENU Key
Display and Set Schedule
Set Nighttime Airflow Option On or Off
Set Nighttime Airflow in Heating
Set Nighttime Airflow in Cooling
Clean Touch Screen
Displays the upstairs airflow
and downstairs airflow.
Displays the Airflow Mode
AUTOMATIC or MANUAL
Displays the heating or cooling
setpoint temperature
NEXT Key
Used to advance through options
ENTER Key
Used to save options
and return to thermostat
operation
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
HEAT
Schedule
AUTO
FANMENU MODE
Heat
Set To
SYSTEM
AM
365
Comfort
The Comfort365 is a touch screen programmable
thermostat that controls heating, cooling and airflow.
The thermostat monitors the upstairs temperature
sensor and automatically adjusts the upstairs and
downstairs airflow to provide uniform comfort.
The energy saving nighttime option uses the upstairs
temperature sensor to control heating and cooling
calls and increases the upstairs airflow.
The user can manually adjust the airflow on
occasions when more airflow is needed upstairs or
downstairs.
Quick Reference
SYSTEM MODE Key
OFF Heating/cooling systems are off.
HEAT Controls heating system only.
COOL Controls cooling system only.
AUTO Controls heating or cooling
depending on indoor temperature.
FAN MODE Key
AUTO Fan runs only when the heating
or cooling system is on.
ON Fan is continuously on.
THERMOSTAT MODE Key
SCHEDULE
Setpoint temperature changes at scheduled times
HOLD
Setpoint temperatures are set by user, not schedule.
VACANT
Setpoint temperatures are kept at the vacant
temperatures set by the installer.
Changing Batteries
Overriding Automatic Airflow
Terminating Automatic Airflow
Turning Nighttime Airflow Option On or Off
Setting the Nighttime Airflow in Heating
Setting the Nighttime Airflow In Cooling
Selecting Manual or Auto Airflow
Cleaning the Touchscreen
User Options and Settings
Quick Reference
Set Time and Day
Set System Mode
Set Fan Mode
Set Schedule
Temperature Override
Set Thermostat Mode
Changing Setpoint Temperature
Displaying Upstairs Temperature
User Options

Set Time and Day
NEXT ENTER
AM
Touch the UP/DOWN keys to change the
HOUR. Touch NEXT to save the hour and
go to change the minute.
CHANGE THE HOUR
Touch the UP/DOWN keys to change the
MINUTE. Touch NEXT to save the minute
and go to change the day of the week.
CHANGE THE MINUTE
Touch the UP/DOWN keys to change the
DAY OF THE WEEK.
Touch ENTER to save the day of the
week and return to thermostat operation.
CHANGE THE DAY OF THE WEEK
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
Touch here to change the
time and day of the week.
We
ENTER
AM
NEXT ENTER
AM
Press the touchscreen with your fingertip only, using a
firm touch. Do not use a sharp object such as a pen or
pencil.
Set System Mode
Touch the SYSTEM key to display the SYSTEM MODES - OFF, HEAT,
COOL, or AUTO. When HEAT is selected, the heating setpoint is
displayed. When COOL is selected, the cooling setpoint is displayed. In
AUTO or OFF, the setpoint for the last system call is displayed.
Inside
Tu
Day
Auto
Downstairs HEAT
Schedule
AUTO
MENU MODE
Heat
Set To
SYSTEM
AM
Upstairs
Airflow %
Touch and hold the SYSTEM key
to select:
FAN
OFF
HEAT
COOL
AUTO
Only heating calls are enabled.
Only cooling calls are enabled.
Heating or Cooling calls are
enabled.
Heating and cooling systems
are off.
Set Fan Mode
Touch the key to display the FAN MODES - AUTO or ON. AUTO is
the most commonly used setting.
FAN
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
Touch FAN key to select:
AUTO
ON
Fan is activated only during
heating or cooling calls.
Fan is continuously on.
Set Thermostat Mode
Touch the key to display the THERMOSTAT MODES -
SCHEDULE, HOLD and VACANT.
MODE
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
Touch and hold the MODE key to select:
SCHEDULE
HOLD
VACANT
Setpoint temperatures are changed
at scheduled times defined by the user.
Setpoint temperatures are set by
the user. No schedule is used.
Setpoint temperatures are kept at the
vacant temperatures set by the installer.
Displays the Mode.
Changing the Setpoint Temperature
The UP/DOWN keys are used to change the setpoint temperature.
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
Touch the UP key to raise setpoint
temperature.
Touch the DOWN key to lower setpoint
temperature.
To display the opposing system setpoint, touch the area shown below.
An active heating call is indicated by
HEAT blinking. An active cooling call
is indicated by COOL blinking.
Upstairs
Touch here to display and change
the opposing setpoint temperature.
Heat
Airflow %
Set To
Auto Schedule
Downstairs
Inside COOL
Day
Tu
SYSTEM
AM
AUTO
FANMENU MODE
Touch the UP/DOWN keys to change the
setpoint temperature for the opposing
system. The thermostat will return to
displaying the active setpoint after about
30 seconds.
Temperature Override
If the thermostat is in SCHEDULE MODE, the setpoint temperature can
be overridden using the UP/DOWN keys. The setpoint temperature will
be held for 3 hours. After 3 hours the thermostat returns to normal
operation.
Inside
Tu
Day
Upstairs
Auto
Downstairs
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
Touch the UP/DOWN keys to adjust the
setpoint temperature.
After 3 hours, the thermostat returns
to normal thermostat operation.
The thermostat displays the downstairs temperature and is indicated
by INSIDE. The upstairs temperature will be indicated by INSIDE2. In
Night Mode, the thermostat displays the upstairs temperature,
indicated by INSIDE2.
Displaying the Upstairs Temperature
Auto
MENU
Downstairs
Airflow %
We
Day
Upstairs
Inside2 COOL
Schedule
AUTO
FANMODE
Cool
Set To
SYSTEM
AM
To display the upstairs temperature,
touch the INSIDE temperature as
indicated. The thermostat will now
display the upstairs temperature,
indicated by INSIDE2.
After about 30 seconds, the
thermostat will return to displaying
the downstairs temperature.

Overriding Automatic Airflow
Terminating Airflow Override
In AUTOMATIC AIRFLOW MODE, the user can override the airflow to
the upstairs and downstairs by pressing AIRFLOW % in the area
shown and then use the UP/DOWN keys to adjust the airflow. After 3
hours, the thermostat returns to automatic operation. UPSTAIRS,
AIRFLOW% and DOWNSTAIRS blink when in airflow override.
AIRFLOW OVERRIDE can terminated by pressing in the
area shown and then pressing the Mode key. The thermostat returns
to automatic airflow control. The AIRFLOW % returns to the airflow
prior to the override.
AIRFLOW %
Touch AIRFLOW% as shown.
Touch the UP key to increase the
upstairs airflow (the downstairs airflow
will automatically decrease). Touch the
DOWN key to increase downstairs airflow
(the upstairs airflow will automatically
decrease).
The override range is defined by the
installer during set up.
Touch AIRFLOW% as shown.
Touch the MODE key to terminate airflow
override.
The thermostat returns to automatic
airflow control. The AIRFLOW % returns
to the airflow prior to the override.
Inside
Inside
We
We
Eve
Eve
Upstairs
Upstairs
Auto
Downstairs
Downstairs
Airflow %
Airflow %
COOL
COOL
Hold
Hold
AUTO
AUTO
FAN
FAN
MENU
MENU
MODE
MODE
SYSTEM
SYSTEM
PM
PM
This area will blink when
in airflow override.
User Options
Selecting Manual or Auto Airflow
Turning Nighttime Airflow Option On or Off
Setting Nighttime Airflow in Heating
Setting Nighttime Airflow in Cooling
Cleaning the Touchscreen
Set Schedule
Factory Set Schedule
Morn
Day
Even
Nite
Monday through Friday
The thermostat comes pre-set with the following energy-saving
schedule for weekdays (Monday-Friday) and weekends
(Saturday-Sunday).Using these settings can reduce your
heating/cooling expenses.
6:00 AM
8:00 AM
6:00 PM
10:00 PM
70
62
70
62
Time Heat Cool
Morn
Day
Even
Nite
Saturday and Sunday
6:00 AM
8:00 AM
6:00 PM
10:00 PM
70
62
70
62
75
75
83
83
75
75
78
78
Time Heat Cool
Change Factory Set Schedule
Touch the key to display SCHEDULE. Here you will select either
the weekday or weekend schedule to display or change. If no key is
touched, the thermostat returns to normal operation after about 30
seconds.
MENU
WeTuMo ThFr
Schedule
MENU NEXT ENTER
Touch the UP key to select the weekday
schedule (MoTuWeThFr) or touch the
DOWN key to select the weekend
schedule (SaSu) and then touch NEXT.
SELECTING THE WEEKDAY OR
WEEKEND SCHEDULE
WeTuMo
Morn
ThFr
Schedule
MENU NEXT ENTER
AM
WeTuMo
Morn
ThFr
Schedule
MENU NEXT ENTER
Heat
Set To
AM
WeTuMo
Morn
ThFr
Schedule
MENU NEXT ENTER
Cool
Set To
AM
Touch the UP/DOWN keys to change the
Morning Schedule Start Time and then
touch NEXT.
SETTING THE MORNING SCHEDULE
START TIME.
Touch the UP/DOWN keys to change the
Morning Schedule Heating Setpoint and
then touch NEXT.
SETTING THE MORNING SCHEDULE
HEATING TEMPERATURE.
Touch the UP/DOWN keys to change
Morning Schedule Cooling Setpoint and
then touch NEXT.
SETTING THE MORNING SCHEDULE
COOLING TEMPERATURE.
Continue setting the start times, heating setpoints, cooling setpoints for
the Day, Evening and Night schedules.
Touch ENTER to save the schedules to the weekdays or the weekend.
Selecting Manual or Auto Airflow
This option is only displayed if your installer enabled Manual Airflow
Control during installation. AUTOMATIC AIRFLOW is the default. In
AUTOMATIC AIRFLOW CONTROL, the airflow is adjusted by the
thermostat. In MANUAL AIRFLOW CONTROL, the user must adjust
the airflow. The airflow range is defined by the installer during set up.
Upstairs
Downstairs
Airflow %
MENU NEXT ENTER
Touch the MENU key until the following
thermostat screen is displayed.
Touch the UP key to select AUTO. Touch
the DOWN key to select MANUAL.
Touch the key to save and go to
next option or touch the ENTER key to
save the options and return to normal
thermostat operation.
MENU
Auto

Cleaning the Touch Screen
This option disables the touch screen for 30 seconds to enable the
user to clean the touch screen by wiping down with a soft, damp cloth.
Touch the MENU key to display the CLEAN DISPLAY option indicated
by CL. The timer will count down and return to normal thermostat
operation after 30 seconds. The remaining time is displayed on the
screen.
NEXT ENTER
Touch the MENU key to display CLEAN
DISPLAY option indicated by CL.
Press ENTER to start the 30 second
count down. The touch screen is disabled
during this time.
Or, press NEXT to return to normal
thermostat operation
Install Two AA Batteries
The batteries power the clock when 24VAC power is lost. Slide
the battery cover downward and install the two AA batteries as
shown.
- + - +
Warranty
This thermostat is warranted to be free of defects due to workmanship or
materials under normal use and service for a period of 5 years from date of
installation and not longer than 6 years from manufacturing date code.
949-916-0945 www.eControlsUSA.com
eControls, 26072 Merit Circle #110, / Laguna Hills, CA 92653
eControlseControls
Turning Nighttime Airflow Option On or Off
When bedrooms are located upstairs, the NIGHTTIME AIRFLOW
option can be used to save energy. The thermostat uses the upstairs
temperature sensor for controlling heating and cooling calls, as if the
thermostat has been moved upstairs. The airflow downstairs is reduced
and the upstairs airflow is increased.
Night
Upstairs
Downstairs
Airflow %
MENU NEXT ENTER
Touch the MENU key to display
NIGHTTIME AIRFLOW option indicated
by nAF On or Off.
Touch the UP key to turn the option ON.
Touch the DOWN key to turn the option
OFF.
Touch the key to save and go to
next option or touch the ENTER key to
save the options.
MENU
Setting the Nighttime Airflow in Heating
This option enables the user to set the maximum allowable upstairs
airflow in heating DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in heating.
Night
Upstairs
Downstairs
Airflow %
MENU ENTER
Heat
Touch the key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
HEATING indicated by nAF Heat.
Touch the UP/DOWN keys to adjust the
airflow.
Touch the MENU key to save and go to
next option or touch the ENTER key to
save the option.
MENU
Setting the Nighttime Airflow in Cooling
This option enables the user to set the maximum allowable upstairs
airflow in cooling DURING NIGHTTIME OPERATION, not to exceed
the installer set maximum allowable upstairs airflow in cooling.
Night
Upstairs
Downstairs
Airflow %
MENU ENTER
Cool
Touch the MENU key to display
NIGHTTIME, UPSTAIRS AIRFLOW IN
COOLING indicated by nAF Cool.
Touch the UP/DOWN keys to adjust the
airflow.
Touch the MENU key to save and go to
next option or touch the ENTER key to
save the options.
NEXT
NEXT
Learn more about your
Comfort365 Thermostat
by watching the Consumer
How-To Video available at
Comfort365USA.com