Eden 95143EDAMZ User manual

MINI MISTING TOWER KIT
95143EDAMZ
Fully articulated spray heads
Bonus: Replacement misting nozzle caps and
atomizer pins included (set of two)
Filter prevents sediments and dirt
from getting into sprinkler
6 stackable 5” risers to
increase height from 5” to 30”
Flow-through design allows
for additional units to be
connected in series
Wide "H" shape platform
design for added stability
• Each misting nozzle features dual 360-degree angle adjustments to water in any direction
• Rubberized grip for comfort while changing the spray angle without straining the hand
• Easy to move and place anywhere in the yard
• Height extends from 5” to 30” with 6 stackable risers
•Flow-through base allows unit-to-unit connections so additional sprinklers can be added for expanded coverage
•No tools required to assemble! Hand tighten only
Bonus: replacement nozzle caps (x2) and atomizer pins (x2) included in case of lost parts during installation or maintenance
Features & Benets
Quick Connect Adapter ts all
standard garden hoses
Simply attach the riser
to the H shaped base
(Do not overtighten)
Add additional risers
for desired height
Attach the misting
head to the top riser
Adjust the position of
each nozzle using the
dual 360-degree angle
adjustments
Simply connect the hose
to the sprinkler
Basic Set-Up
12345
360°
360°
360°
2 soft spray misting nozzles

Follow steps 1-4 from the Basic Set-Up. Then, connect the product adapter to the base of the Misting Tower.
Attach the lockable quick connect to the end of the hose and simply snap in the hose to the Misting Tower.
Set-Up with Quick Connect
To extend, simply remove the end cap and attach another hose and connect another Misting Tower.
Cleaning and Maintenance
If you are not using a water lter and the Misting Tower has low water pressure, you may need to clean the misting nozzles. To
clean, simply use your hand to unscrew the red nozzle caps. Carefully rinse all parts with a gentle water ow. Be mindful of all
parts when cleaning. Cleaning should be done on a workbench to prevent losing parts.
The Quick Connect Adapter (2 pcs) and Hose
Connector with Water Stop (1 pc) simplify your
watering experience. Simply attach the connector
at the end of your hose. Then, connect the
adapters to your watering tools. Interchange
various tools in a snap without turning o the
water as the adapter will stop the water ow. No
more kinking or hose twisting as the adapter
allows the hose to swivel 360 degrees.
A
C
A B C D
B
D
Quick and easy connections to 5/8-inch and
1/2-inch garden hoses, sprinklers, nozzles, and/or
any other garden watering tools
UNLOCK
LOCK
UNLOCK LOCK
Twist-and-lock
mechanism prevents
accidental disconnection
 CAUTION 
-For outdoor use with cold water only
-Do not spray near electrical connections
-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
LOCK
WATER
+