EFG Tab S Floor User manual

EFG Tab S Floor
Assembly Instruction 039172
For more information,
please visit www.efg.info 170106 / Produced by: EFG Marketing Support
The product contains one or more of following materials:
Wood, metal, plastic.

3
Foot connections
For connecting screens at different angles, replace the large feet in the
corners with either smaller feet or an angled fittings. There are 90°, 120°, T-,
X- and straight connections.
Angled bracket fittings,
used in inner corners
instead of feet. Use the oval
holes to adjust the leveling.
Small feet replace the
larger feet on angled
combinations on the
outside.
90° connection
120° connection
"T" connection
"X" connection
4
Oval holes Washer
M6 screw
Tab S Floor - feet
Assemble the feet with the
M6 screws and washers.
Use the oval holes to adjust
the leveling to the floor.
Each screen has four feet.
= small feet
= angled bracket fittings

Top connections (optional)
Top connection, fastened with wood screws.
Top connection
Wood screw
Angled top connection
5
4
Examples, connections
= small feet
= angled bracket fittings