Elation Design LED 60 Strip II WA User manual

Design LED 60 Strip II WA
©Elation Professional • Elation Professional 6122 S. Eastern Ave. Los Angeles, Ca 90040
www.ElationLighting.com • Toll Free [phone]
TECHNICAL SPECIFICATIONS
• DMX Channels: 2 or 4 CH operation modes
• Control: 12 Position Binary dip switches, USITT DMX-512,
3 pin or 5 pin XLR data input & output
• Dimmer: 0 - 100% dimming
• Strobe: Strobe effect (1-18 ashes per second)
• IP Rating: IP 20
• Power Supply: Electronic switching, multi-voltage
90-240V AC, 50/60Hz / linkable
• Power Consumption: 140W
• Lamp: 60 x 1W Luxeon 1 LED’s - (40x White, 20x Amber)
• Lamp Life: 100,000 hrs. life
• Dimensions: ( L x W x H - not including hanging bracket)
68” x 8.5” x 3.25” / 1728 x 215 x 83 mm
• Weight: 24 lbs / 10.5 kg
• Rigging: Installed split yoke mounting bracket, safety
cable and 3-pin data cable included
FEATURES
• High output strip with white and amber LEDs
• 60 x 1W Luxeon LED’s - (40x White, 20x Amber)
• Seamless color changing – warm to cool white
(3200K – 5600K)
• 80º Beam Angle
• 919 lumens @ 1m
• Compact design: ts into 12-inch truss
• Silent operation, convection cooled (No fans)
• On/Off Power switch
• Built-in Power Supply and DMX 512 Control
• Electronic Switching Power Supply (90-260V, 50/60Hz)
• 4 digit LED display
• Linkable power supply up to 8 units
(In/Out power connectors)
• Long Life L.E.D. (rated at 100,000 Hours)
• Low power consumption
• Low heat emissions
• Flicker free operation for television and lm
• Master/ Slave auto program and music trigger
• 8 built-in programs with Speed control
• Strobe effect (1-18 ashed per second)
• Control each L.E.D. independently
• Sound controlled via built-in microphone
• 0-100% Dimming
The Design LED 60 Strip II WA (DLED 60 Strip II WA) by Elation Professional is a high output LED strip with white
and amber LEDs featuring seamless warm to cool white color changing using 60 long life LEDs: 40 white and
20 amber LEDs running at 1W power each. The design of the fixture is optimized providing up to 100,000 hours
estimated LED life, low power consumption and low heat emissions. The DLED 60 Strip II WA has a built-in power
supply and DMX-512 control which is designed to run in stand alone operation with master/slave function or DMX
controlled operation via 2 DMX modes: 4 channel default or user selectable 2 channel operation mode. The unit
can operate from 90 – 260v AC via the internal auto sensing electronic power supply. The DLED 60 Strip II WA
produces an 80° beam angle and also features individual control over each LED, a strobe effect with a maximum
flash rate of 1-18 fps, 0-100% dimming and flicker free operation for television and film. 3 pin data cable is
included and control data input is via 3 pin or 5 pin DMX data first in and out connections. Rigging for the DLED
60 Strip II WA includes installed split yoke mounting bracket which can be used to hang the fixture or set on the
floor and safety I-hook.
Design LED 60 Strip II WA Dimensions

Design LED 60 Strip II WA
©Elation Professional • Elation Professional 6122 S. Eastern Ave. Los Angeles, Ca 90040
www.ElationLighting.com • Toll Free [phone]
COLORS
• 60 x 1W Luxeon LED’s - (40x White, 20x Amber)
• Seamless color changing – warm to cool white (3200K – 5600K)
DMX TRAITS
4 Channel Mode (default):
Channel Value Function
1 0 - 255 White ( 0 - black, 255 - 100% white
)
2 0 - 255 Amber ( 0 - black, 255 - 100% amber
)
3 0 - 255 Strobe
4 0 - 255 Master dim
2 Channel Mode:
Channel Value Function
1 0 - 255 White ( 0 - black, 255 - 100% white
)
2 0 - 255 Amber ( 0 - black, 255 - 100% amber
)
PHOTOMETRICS
Design LED 60 Strip II WA
Photometric Beam Angle Data
Beam Angle 80°
LUX x0.0929 = FC
80°
Beam Angle
85 FC
918.6 LUX
51 FC
549.7 LUX
31 FC
332.6 LUX
0 m
0 ft
1 m
3.28 ft
3 m
9.8 ft
2 m
6.6 ft
Ø 2.10 m
Ø 6.89 ft
Ø 4.20 m
Ø 13.78 ft
Ø 6.30 m
Ø 20.67ft
Beam Diameter
Ø 2.1m / Ø 6.89ft
Ø 4.2m / Ø 13.78ft
Ø 6.3m / Ø 20.67ft