Elba EWMF-E1646RC User manual

For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Owner’s Manual
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number
of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
WALL FAN
MODEL: EWMF-E1646RC(BK)

REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT.
THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE
ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED
BEFORE INSTALLING.
Please read this instruction carefully. It is advisable to keep this instruction manual in
a safe place for future reference.
SAFETY PRECAUTIONS
1. Keep electrical appliances out of reach from children. Do not let them to operate
the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord
or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their
safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre
or a qualified service technician to avoid hazard.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or
property, please read and follow below instructions carefully:
Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the product identification marking.
Do not operate this product if it has malfunctioned, damaged cord or plug or
appears damaged in any way. Return the complete product to the place of
purchase for inspection, repair or replacement.
This product should not be used in the immediate vicinity of water, such as
bathtub, washbowls, swimming pool etc. where the likelihood of immersion or
splashing could occur.
Always switch off and unplug the plug from outlet when not in use, before
assembling or disassembling parts and before cleaning. Fully assemble the fan
before operating.
Avoid contacting with moving parts. Do not insert any object through the guard
when the fan is operating.
Do not cover the guard or operate in close proximity to curtains, etc.
Always disconnect the fan when moving it from one location to another.

PRODUCT DESCRIPTIONS
Front Guard
Wall Mounting Bracket
(Rear)
Control Panel
Blade Assembly
Remote Control

ASSEMBLY INSTRUCTIONS
1. Remove all packaging material and wire fastener from the product.
2. Drill 3 holes on the wall with a distance complied with the hole on the wall bracket (2).
3. Press the screw anchors provided into holes.
4. Mount the hanging bracket (2) on the wall with three screws (1) provided (Fig 1).
(Fig 1) (Fig 2)
5. Hang the rear motor (3) with the holes (11) fixed onto the hanging bracket (2) (Fig 2).
6. Remove the protecting tube (12) from the motor shaft.
7. Loosen the rear guard locking nut (5) from the motor & housing assembly (A).
8. Position the rear guard (4) firmly to the motor & housing assembly (A) and fasten by
turning the rear guard locking nut (5) clockwise tightly.
9. Push the fan blade (6) along the motor shaft. Fasten securely using the fan blade locking
nut (7) by turning anticlockwise.
10.Press the front guard (8) to attach with rear guard (4) until both guards are properly fitted
(Fig 5). Secure both guards firmly by tightening the guard ring clip (9) (Fig 6).
(Fig 3) (Fig 4)
(Fig 5) (Fig 6)

OPERATING INSTRUCTIONS
1. ON/OFF
Press this key to switch the fan on or off.
2. TIMER+ & TIMER-
When this key is pressed repeatedly or kept in pressed status, the time
to be set for air delivery increased step by step of each 0.5 hour and
sums to 7.5 hours in 15 steps. Don’t press the TIMER key when the fan
is required to run continuously. At the moment all lamps won’t be on.
3. SPEED KEY
This key is for switching on the fan. The fan will be started at medium speed to speed
up the rotation. After 2 seconds it will automatically change to the low step.
After the fan has started, this key serves as a speed selector in the sequence from
LOW - MEDIUM - HIGH - LOW - MEDIUM when this key pressed repeatedly or
continuously.
4. MODE KEY
(Only for the control plate): This key is a selector key for wind type. The wind type
changes in the sequence from
NORMAL---NATURAL---SLEEP---NORMAL---NATURAL wind when this key
being pressed repeatedly.
The features of 3 wind types are as follows:
NORMAL WIND:
The fan delivers air constantly with high, medium or low speed set by the SPEED
key.
NATURAL WIND:
The fan delivers air according to the program preset in advance and simulating the
natural wind. The wind varies from strong to weak or vice-versa, making people feel
fresh and comfortable as breezing in natural air.
SLEEP WIND:
The wind weakens step by step as the preset time elapses. And then the fan
switches automatically off.
Depending on the wind speed set by the SPEED key, the sleep wind has also strong,
medium and weak steps and these steps vary as follow:
STRONG WIND:
The fan delivers at first the strong natural wind, then the medium natural wind each
for 30 min. and at last the weak natural wind for the rest preset time.
MEDIUM WIND:
The fan delivers the medium natural wind for 30 min at first and then the weak
natural wind for rest preset time.
WEAK WIND:
The fan delivers the natural breeze.
5. OSC KEY
This key serves to start or stop the fan oscillation. To choose one direction, press this
key until the fan turns in the desired direction and then press again.
Important note: Do not try to change the fan head direction forcibly by hand;
otherwise the fan will be damaged.

NOTES:
The fan can start only with the ON/OFF key.
The pilot lamps of the speed are in relation to the setting of the wind speed, not to
the type. The three lamps for wind speed don’t turn on and off frequently with the
change of wind speed, when the fan operates in the state of natural wind or sleep
wind.
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel,
wooden or abrasive cleaners to clean the appliance.
WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT
THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING
THE GUARD.

MAIN SPECIFICATION
Voltage : 220-240V/50Hz
Rated Power: 60W
Fan Size : 16-inch
Motor : 3-Speed
NOTICE
This product must not be disposed together with domestic waste. It has to be disposed at an authorized
place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to
save natural resources and make sure the product is disposed in an environmental friendly and healthy
way.