Elba EWMF-B1642RC User manual

For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Owner’s Manual
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number
of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
WALL FAN
MODEL: EWMF-B1642RC(GR)

REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT.
THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE
ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED
BEFORE INSTALLING.
Please read this instruction carefully. It is advisable to keep this instruction manual in
a safe place for future reference.
SAFETY PRECAUTIONS
1. Keep electrical appliances out of reach from children. Do not let them to operate
the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord
or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their
safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre
or a qualified service technician to avoid hazard.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or
property, please read and follow below instructions carefully:
Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the product identification marking.
Do not operate this product if it has malfunctioned, damaged cord or plug or
appears damaged in any way. Return the complete product to the place of
purchase for inspection, repair or replacement.
This product should not be used in the immediate vicinity of water, such as
bathtub, washbowls, swimming pool etc. where the likelihood of immersion or
splashing could occur.
Always switch off and unplug the plug from outlet when not in use, before
assembling or disassembling parts and before cleaning. Fully assemble the fan
before operating.
Avoid contacting with moving parts. Do not insert any object through the guard
when the fan is operating.
Do not cover the guard or operate in close proximity to curtains, etc.
Always disconnect the fan when moving it from one location to another.

PRODUCT DESCRIPTIONS
Front Guard
Wall Mounting Bracket
(Rear)
Control Panel
Blade Assembly
Remote Control

ASSEMBLY INSTRUCTIONS
1. Remove all packaging material and wire fastener from the product.
2. Drill 3 holes on the wall with a distance complied with the hole on the wall bracket (2).
3. Press the screw anchors provided into holes.
4. Mount the hanging bracket (2) on the wall with three screws (1) provided (Fig 1).
(Fig 1) (Fig 2)
5. Hang the rear motor (3) with the holes (11) fixed onto the hanging bracket (2) (Fig 2).
6. Remove the protecting tube (12) from the motor shaft.
7. Loosen the rear guard locking nut (5) from the motor & housing assembly (A).
8. Position the rear guard (4) firmly to the motor & housing assembly (A) and fasten by
turning the rear guard locking nut (5) clockwise tightly.
9. Push the fan blade (6) along the motor shaft. Fasten securely using the fan blade locking
nut (7) by turning anticlockwise.
10.Press the front guard (8) to attach with rear guard (4) until both guards are properly fitted
(Fig 5). Secure both guards firmly by tightening the guard ring clip (9) (Fig 6).
(Fig 3) (Fig 4)
(Fig 5) (Fig 6)

OPERATING INSTRUCTIONS
Press this key to turn off the fan.
Press this key to turn on the fan and the related
indicator light will iluminate. The following diagram
shows the order of the wind speed.
LOW MED. HIGH
Press this key, there are three wind modes could
be choose, toggle this key as you desired.
NORMAL NATURAL SLEEP
Press this key to set the timer. The following
diagram shows the order of the time setting.
Press this key to toggle oscillation on/off. If the fan
is turned off, this button would not work.
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel,
wooden or abrasive cleaners to clean the appliance.
WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT
THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING
THE GUARD.
MAIN SPECIFICATION
Voltage : 220-240V/50Hz
Rated Power: 60W
Fan Size : 16-inch
Motor : 3-Speed

NOTICE
This product must not be disposed together with domestic waste. It has to be disposed at an authorized
place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to
save natural resources and make sure the product is disposed in an environmental friendly and healthy
way.