Elba ESF-A1631D(BL) User manual

For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Owner’s Manual
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number
of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
STAND FAN
MODEL: ESF-A1631D(BL)
ESF-A1631D(RD)

REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS
APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE
ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING.
Please read this instruction carefully. It is advisable to keep this instruction manual in a
safe place for future reference.
SAFETY PRECAUTIONS
1. Keep electrical appliances out of reach from children. Do not let them to operate the
appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product, cord or
plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
5. If the power cord or plug in damaged, it must be replaced by the service centre or a
qualified service technician to avoid hazard.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or property,
please read and follow below instructions carefully:
Always operate the product from a power source of the same voltage, frequency and
rating as indicated on the product identification marking.
Do not operate this product if it has malfunctioned, damaged cord or plug or appears
damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement.
This product should not be used in the immediate vicinity of water, such as bathtub,
washbowls, swimming pool etc. where the likelihood of immersion or splashing could
occur.
Always switch off and unplug the plug from outlet when not in use, before assembling
or disassembling parts and before cleaning. Fully assemble the fan before operating.
Avoid contacting with moving parts. Do not insert any object through the guard when
the fan is operating.
Do not cover the guard or operate in close proximity to curtains, etc.
Always disconnect the fan when moving it from one location to another.

ASSEMBLY INSTRUCTIONS
1. Fix the vertical pipe to the base.
2. Loosen and take off the height adjustment screws.
3. Pull out the extension tube to a required height and
tighten the height adjustment screws.
Caution: The height adjustment screws must be fully
tightened before assembling the motor section to the
pedestal stand.
4. Fit the motor section to the pedestal stand and tighten the
thumbscrew.
Caution: The thumbscrew must be fully tightened before
the fan is operated.
5. Set the rear guard in the proper position (handle
uppermost) and screw on the guard retaining nut until it is
tight.
6. Mount the blade onto the shaft and tighten with the blade
retaining nut (counter-clockwise) firmly.
7. Open clips on the front guard and attach front guard with
rear guard (align locking screw holes).
8. Secure both guards firmly by fitting and tightening the
screw and nut.
OPERATING INSTRUCTIONS
1. Press “ON/SPEED/OFF” button to switch on the appliance, the fan starts working on
medium speed.
After three seconds, the fan will turn to low speed.
Press “ON/SPEED/OFF” button again to choose a medium speed.
Press “ON/SPEED/OFF” button for the third time, the fan will work on high speed.
Corresponding “SPEED” indicators will appear on the display.
Press the “ON/SPEED/OFF” button to switch off the appliance.
The room temperature is shown on the display.
2. Press the timer button for 1 to 8 hours timing, this function can be operated under any mode.
3. After the fan is switched on, it starts operating in normal mode.
2 different fan modes can be chosen by pressing the (MODE) button:
“” –fan speed varies to simulate a natural breeze.
“” –fan speed varies to simulate a sleeping breeze (recommended to use at night).
When operating at “ ” “Natural breeze” mode, fan motor will operate irregularly. The
change of breeze from high to low speed is constant and the interval is 3 seconds.
When operating at “ ” “Sleep” mode, fan motor operate by program of natural breeze.
When the fan initially setting high speed, fan will operate for half an hour, then varies to
medium natural breeze. After half hour, vary to low natural breeze until the selected time
ended or the switch is turned off.
When the fan initially setting medium speed, fan will operate for half an hour, then varies to
low natural breeze until selected time ended or the switch is turned off.
When the fan initially setting low speed, the fan will still operate in the status of low natural
breeze until selected time ended or the switch is turned off.
Base
adjustment ring
Fasten Height

4. To make the fan head oscillate, press the oscillation button. To stop the oscillation, press the
oscillation button again.
WARNING: Do not adjust the oscillating angle by hand. It will damage the synchronous motor.
5. To adjust the tilt of the fan head, move the fan head to the desired angle and the head will
latch into place.
WARNING: The fan should be switched off when making this adjustment.
6. To adjust the height of the pedestal fan, loosen the height adjustment nut carefully raising or
lowering the fan and firmly tighten the height adjustment nut.
WARNING: The fan should be switched off when making this adjustment.
PRODUCT DESCRIPTION
oscillation knob
Guard
Retaining
Nut
Screw
Nut
Circle
Front guard Blade
Retaining
Nut
Fan Blade
Rear guard
Handle
Tilt adjustment
knob
Unscrew
screw
Height
adjustment
Speed control
buttons
Motor housing
Motor shaft

REMOTE CONTROL
1. The remote control requires 2 x AAA size
batteries.
2. Open the battery compartment by sliding the
cover down.
3. Insert the batteries noting the polarity indicated
in the battery compartment.
4. Remote control operations are identical to the
functions on the fan control panel.
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel,
wooden or abrasive cleaners to clean the appliance.
WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT THE
FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING THE GUARD.
MAIN SPECIFICATION:
Voltage : 220-240V/50Hz
Rated Power: 60W
Fan Size : 16-inch
Motor : 3-Speed
NOTICE
This product must not be disposed together with domestic waste. It has to
be disposed at an authorized place for recycling of electrical and
electronic appliances. By collecting and recycling waste, you help to save
natural resources and make sure the product is disposed in an
environmental friendly and healthy way.
Please change to “ELBA”