Electrolux EXO27HEIWE User manual

EXO27HEIWE
EXO36HEIWE
EXI09JEIWI
EXI12JEIWI
EXC09JEIWI
EXC12JEIWI
EXU09JEIWI
EXU12JEIWI
EN AIR CONDITIONER
FR CLIMATISEUR
EL ΚΛΙΜΑΤΙΣΤΙΚΟ
IT CONDIZIONATORE D’ARIA
PL KLIMATYZATOR
PT AR CONDICIONADO
ES AIRE ACONDICIONADO
USER MANUAL
MANUEL D’UTILISATION
ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
MANUALE PER L’UTENTE
INSTRUKCJA OBSŁUGI
MANUAL DO UTILIZADOR
MANUAL DE INSTRUCCIONES
................................................... ........................................................
2
40
78
116
154
192
230
EXO18HEIWE
EXO42HEIWE
EXC18JEIWI
EXU18JEIWI
EXI18JEIWI
EXC24JEIWI

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has been
designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number
Warning / Caution-Safety information.
General information and tips
Environmental information.
Subject to change without notice.
2 www.electrolux.com
CONTENTS
1. SAFETY INSTRUCTIONS .................................................................................... 3
2. PRODUCT DESCRIPTION ................................................................................... 7
3. CONTROL PANEL ............................................................................................. 10
4. REMOTE CONTROL ......................................................................................... 11
5. REMOTE CONTROL DESCRIPTION .................................................................. 13
6. REMOTE CONTROL DISPLAY INDICATOR ....................................................... 16
7. FIRST USE ........................................................................................................ 17
8. HOW TO USE THE REMOTE CONTROL ........................................................... 18
9. HOW TO USE THE INDOOR UNIT..................................................................... 29
10. OPERATING TEMPERATURE ............................................................................ 30
11. EMERGENCY OPERATION ............................................................................... 31
12. OPTIMAL OPERATION ...................................................................................... 31
13. CLEANING AND MAINTENANCE ...................................................................... 32
14. OPERATION TIPS .............................................................................................. 36
15. TROUBLESHOOTING ....................................................................................... 37
16. CORRECT DISPOSAL OF THIS PRODUCT ....................................................... 38

3 ENGLISH
1. SAFETY INSTRUCTIONS
Before the installation
and use of the appliance,
carefully read the
supplied instructions.
The manufacturer is not
responsible if an incorrect
installation anduse causes
injuries and damages. Always
keep the instructions with the
appliance for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury
or permanent disability.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved.
• Children shall not play with
the appliance.
• Cleaning and user
maintenance shall not be
made by children without
supervision.
1.2 Installation and Use
WARNING!
Risk of suffocation, injury
or permanent disability.
• Contact an authorised
installer for installation of
this unit.
• Contact an authorised
service technician for repair
or maintenance of this unit.
• The socket outlet required
to supply power must
be connected and
commissioned by a
licenced contractor.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly qualied
persons in order to avoid a
hazard.
• Installation work must be
performed in accordance
with the national wiring
standards and the
electricity suppliers service
rules by authorised
personnel only.
• If the unit is to be moved
to another location or
disposed of, only a
suitably qualied person
is permitted to undertake
such work.

4 www.electrolux.com
• If you notice an unusal
situation, such as a burning
smell, please switch off the
power to the air conditioner
and contact an Electrolux
service agent. If this
abnormal status continues
the air conditioner may be
damaged or even cause
electric shock or re.
• Do not operate the air
conditioner with wet hands.
This may cause electric
shock.
• Do not damage or cut
off the power cord or
other wires. If this occurs,
please have it repaired or
replaced by an accredited
technician.
• Do not connect this air
conditioner to a multi outlet
powerboard.
• Please switch off the
power supply to the air
conditioner if it is not to
be used for an extended
period. Otherwise, it will
accumulate dust and may
cause a re.
• Before cleaning the
air conditioner, please
disconnect the power
supply in order to eliminate
the possibility of electric
shock.
• The power supply should
be matched with the air
conditioner according to
the installation manual.
Air conditioners provided
with a supply cord should
be connected directly
to a power outlet with a
suitable safety switch. Air
conditioners that are hard
wired must be connected
to a suitable safety circuit
breaker according to the
installation manual.
• Please ensure that the
power supply to the air
conditioner is stable and
meets the requirements
set out in the installation
manual.
• Always ensure the product
is installed with appropriate
earthing.
• For safety, be sure to turn
off the circuit breaker
before performing any
maintenance or cleaning
or when the product
is not used for an
extended period of time.
Accumulated dust may
cause re or electric shock.
• Select the most appropriate
temperature. It can save
electricity.

5 ENGLISH
• Do not keep windows
and doors open for a long
time during operation. It
will result in insufcient
performance.
• Do not block the air inlet
or outlet. It will result in
insufcient performance
and cause malfunctions.
• Keep combustible materials
away from the units at least
1m. It may cause re.
• Do not step on the top of
the outdoor unit or place
heavy things on it. It may
cause damage or injury.
• Do not attempt to repair the
air conditioner by yourself.
Incorrect repairs may cause
electric shock or re. Please
contact your local authorised
service centre.
• Do not insert your hands or
objects into the air inlet or
outlet. It may cause injury.
• Do not expose animals or
plants directly to the airflow.
• Do not use the unit for any
other purpose, such as
preserving food or drying
clothes.
• Do not splash water on the
air conditioner. It may cause
electric shock or malfunction.
• For safety, be sure to turn
off the circuit breaker
before performing any
maintenance or cleaning
or when the product
is not used for an
extended period of time.
Accumulated dust may
cause re or electric shock.
• Installs, Services, maintains,
repaires, checks for leaks or
decommissions equipment
and product recycling should
be carried out by natural
persons that hold the relevant
certicates.
• Leak checks with the
following frequency: where
a leakage detection system
is installed, at least every
12 months.
• Operators of equipment which
is required to be checked
for leaks, shall establish and
maintain records for each
piece of such equipment.
• This unit contains a R410A
refrigerant fluid with a GWP
equal to 2087.5. Refrigerant
weight: 1.9~3.5KG
(depending on different
models)

6 www.electrolux.com
You can also get this manual through your local distributor or
by visiting our website.
Please nd the Electrolux web addresses to your local country
from below table.
Country Website address Country Website address
Albania www.electrolux.al Nether-
lands www.electrolux.nl
Austria www.electrolux.at Norway www.electrolux.no
Belgium www.electrolux.be Poland www.electrolux.pl
Bulgaria www.electrolux.bg Portugal www.electrolux.pt
Croatia www.electrolux.hr Romania www.electrolux.ro
Czech
Republik www.electrolux.cz Serbia www.electrolux.rs
Denmark www.electrolux.dk Slovakia www.electrolux.sk
Finland www.electrolux. Slovenia www.electrolux.sl
France www.electrolux.fr Spain www.electrolux.es
Germany www.electrolux.de Sweden www.electrolux.se
Greece www.electrolux.gr Switzer-
land www.electrolux.ch
Hungary www.electrolux.hu Turkey www.electrolux.com.
tr
Italy www.electrolux.it UK &
Ireland www.electrolux. co.uk
Luxem-
bourg www.electrolux.lu
Please visit www.electrolux.com for more inforamtion

7 ENGLISH
1 3 72
4 6 8
9
10
11
12
5
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
Air inlet
Air Outlet
Air inlet (side) Air inlet (rear)
Air outlet
1 Front panel
2 Air inlet
3 Air lter
4 Air outlet
5 Horizontal air flow grille
6 Vertical air flow louver(inside)
7 Display panel
8 Connecting pipe (optional)
9 Connecting cable (optional)
10 Stop Valve
11 Remote controller
12 Mounting plate
All the pictures in this manual are for explanation
purposes only. The actual shape of the indoor unit
you purchased may be slight different on front
panel and display window. The actual shape shall
prevail.
2.1 Split Type
2. PRODUCT DESCRIPTION

8 www.electrolux.com8 www.electrolux.com
2.2 Cassette Type
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
LOW
MODE
FAN SPEED
VERTICAL/
SWING
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
TURBO
HORIZONTAL/
SWING
MED
2
3
9
11
1
46 5 7 8
11
12
10
1 Air flow louver (at air outlet)
2 Drain pump (drain water from indoor unit)
3 Drain pipe (optional)
4 Air outlet
5 Air lter(inside air-in grill)
6 Air inlet
7 Air-in grill
8 Display panel
9 Refrigerant pipe (optional)
10 Remote controller
11 Air inlet
12 Air outlet

9 ENGLISH
7 Air-in grill
8 Display panel
9 Refrigerant pipe (optional)
10 Remote controller
11 Air inlet
12 Air outlet
2.3 Duct Type
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
LOW
MODE
FAN SPEED
VERTICAL/
SWING
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
TURBO
HORIZONTAL/
SWING
MED
4
3
6
7
8
9
10
1
11
5
2
1 Air outlet
2 Air inlet
3 Air lter
4 Electric control cabinet
5 Wire controller (optional)
6 Drain pipe (optional)
7 Drain hose, refrigerant connecting
pipe (optional)
8 Connective cable (optional)
9 Stop valve
10 Fan hood
11 Remote controller

10 www.electrolux.com
3. CONTROL PANEL
3.1 Split Type
1 ION indication lamp(optional)
Lights up when Clean Air feature is
activated.
2 DEFROST indication lamp
(Enabled on cooling & heating models
only) Lights up when the air conditioner
starts defrosting automatically or when
the warm air control feature is activated in
heating operation.
3 TEMPERATURE indication lamp
• Displays the temperature settings when
the air conditioner is operational.
• Displays the malfunction code when
fault occurs.
4 OPERATION indication lamp
This lamp illuminates when the air
conditioner is in operation.
5 TIMER indication lamp
Lights up during Timer operation.
3.2 Cassette Type
1 OPERATION lamp
This indicator illuminates when the unit is
operational.
2 TIMER indication lamp
Lights up during Timer operation.
3 PRE-DEF./FAN indication lamp
Lights up when the air conditioner starts
defrosting automatically in heating
operation(applicable to cooling & heating
models only)or fan only mode is selected
(applicable to cooling only models).
4 ALARM indication lamp
Flashes when malfunction occurs.
5 TEMPORARY button
This button is used to operate the unit
temporarily in case you misplace the
remote controller or its batteries are
exhausted. One press of the manual
control button will lead to the forced
AUTO operation. If press the button twice
within ve seconds, the unit will operate
under forced COOL operation. The
forced COOL operation is used for testing
purposes only, please do not choose it
unless it is necessary.
1 2 3 4 5
21 3 4
5

11 ENGLISH
4. REMOTE CONTROL
4.1 How to use the Remote
control
1. Keep the remote control where its
signal can reach the receiver of the
indoor unit.
2. When operate the air conditioner, make
sure the remote control is pointing to
the signal receiver of the indoor unit.
3. When the remote control sends out
a signal, the symbol will blink for
about 1 second on the display of the
remote control.
4. The indoor unit will acknowledge the
signal with a beep when it receives the
signal from the remote control.
5. Please press the button of the remote
control and resend the signal if you did
not hear a beep from the indoor unit.
• The air conditioner will not
operate if curtains, doors or other
materials block the signals from
the remote control to the indoor
unit.
• Prevent any liquid from falling
into the remote control. Do not
expose the remote control to
direct sunlight or heat.
• If the infrared signal receiver on
the indoor unit is exposed to
direct sunlight, the air conditioner
may not function properly. Use
curtains to prevent the sunlight
from falling on the receiver.
• If other electrical appliances react
to the remote control, either move
these appliances or consult your
local dealer.
3.3 Duct Type
1 MANUAL button
This button is used to operate the unit
temporarily in case you misplace the
remote controller or its batteries are
exhausted. One press of the manual
control button will lead to the forced
AUTO operation. If press the button twice
within ve seconds, the unit will operate
under forced COOL operation. The
forced COOL operation is used for testing
purposes only, please do not choose it
unless it is necessary.
2 OPERATION indication lamp
This indicator illuminates when the unit is
operational.
3 TIMER indication lamp
Lights up during Timer operation.
4 DEF./FAN indication lamp
Lights up when the air conditioner starts
defrosting automatically in heating
operation (applicable to cooling &
heating models only) or fan only mode
is selected(applicable to cooling only
models).
5 ALARM indication lamp
Flashes when malfunction occurs.
1 2 3 4 5
MANUAL OPERATION TIMER DEF./FAN ALARM

12 www.electrolux.com
4.2 Location of the Remote Control
Fig.01
.
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
8 m
• Keep the remote control where its
signal can reach the receiver of the
indoor unit (a maximum distance of
8 m is allowed).
• When you select the timer operation,
the remote control automatically
transmits a signal to the indoor unit at
the specied time.
• If you keep the remote control in a
position that hinders proper signal
transmission, a time lag of up to
15 minutes may occur.
• When the remote control sends out
a signal, the symbol will blink
for about 1 second on the display.
The indoor unit will acknowledge the
signal with a beep when it receives an
effective signal.
4.3 Battery installation/replacement
Fig.02 • Slide the battery compartment cover
off and insert two new alkaline dry
batteries (2x AAA 1.5 Volt). Make sure
that the polarity of (+) or (-) is installed
correctly.
• Slide the battery compartment cover
back on.
• When changing batteries, do
not use old or varied ones,
otherwise, it may cause
problems with the remote
control.
• If the remote control is not used
for a long time, remove the
batteries as old batteries may
leak or corrode and damage
the remote control.
• The battery life during normal
use is about six months.
• If the remote control does
not operate normally,please
remove and ret the batteries. If
abnormal operation continues,
replace with new batteries.

13 ENGLISH
5. REMOTE CONTROL DESCRIPTION
5.1 Split Type
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
1
3
4
5
6
7
2
9
8
10
11
12
13
14
15
1 TEMP DOWN Button
2 TEMP UP Button
3 MODE Button
4 SWING Button
5 ION Button(on some models)
6 FOLLOW ME Button
7 RESET Button
8 ON/OFF Button
9 FAN SPEED Button
10 TIMER ON Button
11 ECONOMY/SLEEP Button
12 TIMER OFF Button
13 LOCK Button
14 Turbo Button
15 LED Display Button
TEMP DOWN BUTTON
Push this button to decrease the
indoor temperature setting in 1°C (2°F)
increments to 17°C(62°F).
TEMP UP BUTON
Push this button to increase the
indoor temperature setting in 1°C (2°F)
increments to 30°C(88°F).
MODE BUTTON
Each time the button is pressed, the
operation mode is selected in the
sequence of the following:
Heat mode is for reverse cycle
models only.
SWING BUTTON
Press this button once and quickly
to change the air flow direction of the
horizontal louver a little. The moving
angle of the louver is 6° for each press.
Press the button without releasing for
2 more seconds, the horizontal louver
would swing automatically. Press it again,
it would stop moving. When the louver
swing/moving at a certain position which
would affect the cooling and heating
effect of the air conditioner, it would
automatically change the swing direction
(upward or downward).
ION BUTTON (on some models)
When push this button, the ion generator
is energized and will help to remove pollen
and impurities from the air.
FOLLOW ME BUTTON
Push this button to initiate the Follow Me
function, the remote controller begins
to detect the actual temperature at its
location. The remote controller will send
this signal to the air conditioner every
3 minutes interval until press the Follow
Me button again. The air conditioner will
beep to indicate the Follow Me feature
has ended if it does not receive the signal
during any 7 minutes interval.
AUTO COOL DRY HEAT FAN

14 www.electrolux.com
RESET BUTTON
Once the recessed RESET button is
pressed, all of the current settings will be
cancelled and the controller will return to
the initial settings.
ON/OFF BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
FAN SPEED BUTTON
Used to select the fan speed in four steps.
TIMER ON BUTTON
Press this button to activate the Auto-on
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-on time
setting, just press the button until the time
setting is 0.0.
ECONOMY/SLEEP BUTTON
Press this button to activate the Energy-
Saving mode. Press again to stop
the function. This function is available
on COOL, HEAT or AUTO mode only
and maintain the most comfortable
temperature for you.
TIMER OFF BUTTON
Press this button to activate the Auto-off
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-off time
setting, just press the button until the time
setting is 0.0.
LOCK BUTTON
When you press the Lock button,all
current settings are locked in and the
remote controller does not accept any
operation except that of the Lock. Press
again to cancel the Lock mode.
TURBO BUTTON
Push this button to activate the Turbo
function which enables the unit to reach
the preset temperature at cooling or
heating operation in the shortest time (if
the unit has no this function, there is no
corresponding operation happened when
press Turbo button.)
LED DISPLAY BUTTON
Press this button to clear the display on
the unit, press it again to light the display.
AUTO LOW HIGHMED

15 ENGLISH
5.2 Cassette/Duct Type
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
LOW
MODE
FAN SPEED
VERTICAL/
SWING
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
TURBO
HORIZONTAL/
SWING
MED
1
3
4
5
6
7
2
9
8
10
11
12
13
14
1 TEMP DOWN Button
2 TEMP UP Button
3 MODE Button
4 HORIZONTAL/SWING Button
5 VERTICAL/SWING Button
6 RESET Button
7 FOLLOW ME Button
8 ON/OFF Button
9 FAN SPEED Button
10 TIMER ON Button
11 ECONOMY/SLEEP Button
12 TIMER OFF Button
13 LOCK Button
14 Turbo Button
TEMP DOWN Button
Push this button to decrease the indoor
temperature setting in 1°C(2°F) increments
to 17°C(62°F).
TEMP UP Button
Push this button to increase the indoor
temperature setting in 1°C(2°F) increments
to 30°C(88°F).
MODE BUTTON
Each time the button is pressed, the
operation mode is selected in the
sequence of the following:
Heat mode is for reverse cycle
models only.
HORIZONTAL/SWING BUTTON
When press the button once and quickly,
the air flow direction setting feature of
the louver is activated. The moving angle
of the louver is 6º for each press. Keep
pressing the button to move the louver
to the desired position. If keep pressing
the button without releasing for 2 more
seconds, the auto swing feature of the
louver is activated. The horizontal louver
would swing up/down automatically. Press
it again to stop.
VERTICAL/SWING BUTTON
When press the button once and quickly,
the air flow direction setting feature of
the louver is activated.The moving angle
of the louver is 6º for each press. Keep
pressing the button to move the louver
to the desired position. If keep pressing
the button without releasing for 2 more
seconds, the auto swing feature of the
louver is activated. The vertical louver
would swing right/left automatically. Press
it again to stop.
RESET BUTTON
Once the recessed RESET button is
pressed, all of the current settings will be
cancelled and the controller will return to
the initial settings.
FOLLOW ME BUTTON
Push this button to initiate the Follow Me
function, the remote controller begins
AUTO COOL DRY HEAT FAN

16 www.electrolux.com
to detect the actual temperature at its
location. The remote controller will send
this signal to the air conditioner every
3 minutes interval until press the Follow
Me button again. The air conditioner will
beep to indicate the Follow Me feature
has ended if it does not receive the signal
during any 7 minutes interval.
ON/OFF BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
FAN SPEED BUTTON
Used to select the fan speed in four steps.
TIMER ON BUTTON
Press this button to activate the Auto-on
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-on time
setting, just press the button until the time
setting is 0.0.
ECONOMY/SLEEP BUTTON
Press this button to activate the Energy-
Saving mode. Press again to stop
the function. This function is available
on COOL, HEAT or AUTO mode only
and maintain the most comfortable
temperature for you.
TIMER OFF BUTTON
Press this button to activate the Auto-off
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-off time
setting, just press the button until the time
setting is 0.0.
LOCK BUTTON
When you press the Lock button,all
current settings are locked in and the
remote controller does not accept any
operation except that of the Lock. Press
again to cancel the Lock mode.
TURBO BUTTON
Push this button to activate the Turbo
function which enables the unit to reach
the preset temperature at cooling or
heating operation in the shortest time(if
the unit has no this function, there is no
corresponding operation happened when
press Turbo button.)
AUTO LOW HIGHMED
6. REMOTE CONTROL DISPLAY INDICATOR
TIMER ON OFF
SET TEMPERATURE
1
3 4
5
6
7
2
98
1 MODE display
2 Transmission Indicator
3 Temp./Timer display
4 ON/OFF display
5 MODE display(FAN mode)
6 FAN SPEED display
7 FOLLOW ME display
8 TIMER display
9 LOCK Indicator

17 ENGLISH
MODE DISPLAY
Displays the current selected mode.
Including AUTO, COOL, DRY, HEAT
(cooling & heating models only) and FAN.
TRANSMISSION INDICATOR
This transmission indicator will light when
remote controller transmits signals to the
indoor unit.
TEMP./TIMER DISPLAY
The temperature setting (from 17°C/62°F
to 30°C/88°F) or timer setting (0~24h)
will be displayed. If FAN only mode is
selected, there will be no display.
ON/OFF DISPLAY
This indicator will be displayed when the
unit is operating.
FAN SPEED DISPLAY
Displays the selected fan speed: AUTO,
HIGH, MED and LOW. Nothing displays
when the fan speed is selected in AUTO
speed. When AUTO or DRY Mode
is selected, there will be no signals
displayed.
FOLLOW ME DISPLAY
When pressing FOLLOW ME button in
COOL or HEAT mode, the remote sensing
function is activated and this indicator
displays.
TIMER DISPLAY
This display area shows the settings of the
TIMER. That is, if only the Auto-on time
function is set, it will display TIMER ON. If
only the Auto-off time function is set, it will
display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which
indicates you have chosen both the Auto-
on time and Auto-off time.
LOCK INDICATOR
LOCK display is displayed when pushing
the LOCK button. Push the LOCK button
to clear display.
7. FIRST USE
1. Ensure the unit is plugged in and power
is available.
2. Be sure the batteries are inserted
correctly in the remote control (the
lights on the remote control will be on).
3. Set the time by Control buttons and
conrm by pressing the Clock button.
4. Point the remote control to the indoor
unit and press ON/OFF button to turn
the unit on.
• In case of energy cut off or
product shut down when
removing the power cord,
or even when changing the
remote control batteries the
microprocessor will return back
to the AUTO mode.
• The default operating mode
is AUTO. Once you select the
operating mode with remote
control, the operating conditions
will be saved in the indoor unit’s
microcomputer memory. The
next time the air conditioner will
start operating under the same
conditions when you simply push
the ON/OFF button of the remote
control.

18 www.electrolux.com
8. HOW TO USE THE REMOTE CONTROL
8.1 Split Type
Ensure the unit is plugged in and power is available. The OPERATION indicator on
the display panel of the indoor unit illuminates.
Automatic Operation
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SETTEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
A
BC
1. Press the MODE button (A) to select
Auto.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the ON/OFF button (C) to start
the air conditioner.
• In the Auto mode, the air
conditioner can logically choose
the mode of Cooling, Fan,
Heating and Dehumidifying
by sensing the difference
between the actual ambient
room temperature and the set
temperature on the remote
controller.
• In the Auto mode, you can not
switch the fan speed. It has
already been automatically
controlled.
• If the Auto mode is not
comfortable for you, the desired
mode can be selected manually.

19 ENGLISH
Dehumidifying Operation
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SETTEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
A
BC
1. Press the MODE button (A) to select
DRY mode.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the ON/OFF button (C) to start
the air conditioner.
In the Dehumidifying mode, you
can not switch the fan speed. It
has already been automatically
controlled.
Cooling/Heating/Fan Operation
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
AC
D
B
1. Press the MODE button (A) to select
COOL, HEAT (Reverse cycle models
only) or FAN mode.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the FAN SPEED button (C) to
select the fan speed in four steps -
Auto, Low, Med, or High.
4. Press the ON/OFF button (D) to start
the air conditioner.
In the Fan mode, the setting
temperature is not displayed in
the remote controller and you
are not able to control the room
temperature either. In this case,
only step 1, 3 and 4 may be
performed.

20 www.electrolux.com
Swing Operation
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
A
1. When press the button (A) once and
quickly, the air flow direction setting
feature of the louver is activated. The
moving angle of the louver is 6º for
each press. Keep pressing the button
to move the louver to the desired
position.
2. If keep pressing the SWING button
without releasing for 2 more seconds,
the auto swing feature of the louver is
activated. The horizontal louver would
swing up/down automatically. Press it
again to stop.
When the louver swing or move
to a position which would affect
the cooling and heating effect
of the air conditioner, it would
automatically change the swing/
moving direction.
Timer Operation
TIMER ON
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME LED
DISPLAY
ION
TURBO
A
B
Press the TIMER ON button (A) can set
the auto-on time of the unit. And press the
TIMER OFF button (B) can set the auto-off
time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The
remote controller shows TIMER ON,
the last Auto-on setting time and
the signal “h” will be shown on the
LCD display area. Now it is ready to
reset the Auto-on time to START the
operation.
2. Push the TIMER ON button again to set
desired Auto-on time. Each time you
press the button, the time increases in
30 minutes increments, up to 10 hours,
then at 1 hour increments up to
24 hours.
3. After setting the TIMER ON, there will
be a one-half second delay before
the remote controller transmits the
signal to the air conditioner. Then, after
approximately another 2 seconds, the
signal “h” will disappear and the set
temperature will re-appear on the LCD
display window.