Electrolux EID60010X User manual

User Instructions
4 SPRINGS WATER CHILLER
Undersink installation

electrolux 3
Dear customer,
thank you for choosing an Electrolux appliance. Thanks to its high quality,
performances and reliability this appliance will make your everyday life
comfortable, easy and safe.
When designing our products we use the most updated technology, but we
always respect the environment and the laws in force.
Over 90% of our appliances are environmentally friendly classified as A, A+,
and A++ and they are recommended by WWF.
Please read this instruction manual carefully, it describes the correct and
safe use of your appliance and suggests the most efficient maintenance.

4electrolux electrical safety
Contents
Undersink installation............................ 1
Safety instructions .......................... 5
Electrical safety .............................. 5
During installation............................ 6
During use...................................... 7
For cleaning ................................... 7
Safeguarding the environment ............. 7
Appliance description....................... 8
Parti ............................................ 8
Identification plate ......................... 9
Technical specifications.................... 9
Installation ..................................10
Fasi di installazione: ....................... 10
Package content ............................ 10
Positioning of the water cooler in the
undersink compartment ....................... 11
Connecting to water supply................... 12
Installation of dispensing tap................. 13
Installation of filter cartridge and Co2 Bottle15
Disposable bottle ........................... 15
Electrical connection and first starting.16
How to dispense water ....................17
Water dispensing ............................... 18
Alarms........................................19
Maintenance and cleaning ................20
CO2 bottle replacement (for food) ...... 20
Filter cartridge replacement ............. 21
Cleaning and disinfecting procedure .... 22
Litres counter reset ........................ 22
Troubleshooting ............................24
Environmental protection.................25
Prolonged disuse ...........................25
Schema elettrico ...........................26
Schema idraulico ...........................27
Guarantee/Customer Service ............28

safety instructions electrolux 5
The following symbols are utilized with this manual:
Information on safety
Protecting the environment
Do not throw away in non-differentiated urban waste
Safety instructions
This appliance complies with the safety and health requirements of the
following EC Directives:
2006/95/CE Low voltage
2004/108/CE Electromagnetic compatibility
98/37/CE Machine Directive.
Please keep this manual in a safe place, far from damaging agents and close
to the appliance for consultation purposes.
These instructions aim at
guaranteeing safety to you
and to the other users.
Please read them carefully
before installing and starting
the appliance.
Electrical safety
To start the appliance
connect the supplied plug to
an electrical socket.
Household electrical system
must comply with all safety
laws and regulations in force.
If you are not sure your
system does, have it checked
by a specialized electrician.

6electrolux electrical safety
In case of fault, never try to
repair the appliance on your
own; contact the nearest
technical assistance centre
to request the intervention of
a technician. If carried out by
non-qualified people, repairs
can cause damages.
Unplug the appliance before
any cleaning or maintenance
operation.
If the power cable is
damaged, replace it with a
new one to be requested
from the dealer or from an
authorized technical
assistance centre.
During installation
Take particular care during
handling, so as not to damage
parts of the refrigeration
circuit and thus avoid
possible gas leaks.
Avoid any prolonged exposure
to the sun.
Carry out installation and
connection, carefully
following the instructions
contained in this handbook.
If the appliance is
transported in the horizontal
position, the oil contained in
the compressor may flow into
the refrigerant circuit.
Therefore, leave it in the
upright position for at least
2 hours before starting it, in
order to allow the oil to flow
back into the compressor.
Do not bend the pipes
excessively during appliance
installation.

descrizione dell’apparecchio electrolux 7
During use
Only use the 4 Springs for its
intended purpose, i.e. for
dispensing carbonated or
non-carbonated water.
Improper use of the
appliance can compromise its
correct operation and cause
harm to the health of people.
The appliance is not to be
used by children or persons
with reduced physical,
sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction.
For cleaning
Never use metal objects to
clean the appliance, as they
could damage the surfaces.
Safeguarding the environment
When scrapping the
appliance, correctly dispose
of it in compliance with
current regulations and
according to the recyclable
materials present and marked
with the special symbol.

8electrolux appliance description
Appliance description
The 4 Springs appliance is a device
for domestic use, for chilling,
treating and carbonating mains
water.
The appliance is provided with a tap
to be installed on the sink, for
dispensing:
-Cold water
-Carbonated cold water
-Cold and hot water from the
mains.
13
1
2
9
8
10
7
A
3
14
4
15
5
6
B
Fig. 1
Parts
The main parts of the 4 Springs water chiller are:
1. Plug
2. Connection fittings
3. Temperature regulating device
4. LED Panel
5. Starting button
6. Electric socket
7. CO2 Bottle
8. CO2 pressure reducer
9. Filter door
10. Tap
11. Installation kit
12. Cleaning and disinfecting
cartridge
13. Carbonator access knob
14. Bushing with fiber optic
15. Reset button
12
11

technical characteristics electrolux 9
Identification plate
If the appliance does not work
properly and you cannot solve
the problem, please contact
the closest Technical
Assistance centre.
You will be asked to give the
data and the characteristics of
the appliance, to be found in
the identification plate on the
frontal panel.
Fig. 2
Technical specifications
Power supply voltage 230 V
Frequency 50 Hz
A
bsorbed power 190 W
Litres of water dispensed 15 litres/h
Dispensing temperature < 13°C
W
ater supply pressure (water inlet) > 2.0 bar
Carbonator CO2 inlet pressure 2.5 - 4 bar
Filter cartridge 0.5 micron
Filtering capacity 2840 litres
Operating temperature 18°C - 32°C
Overall dimensions L x D x H 227 x 450 x 378 mm
W
eight 29 kg
Refrigerant gas 140g -R134a

10 electrolux installazione
Installation
Installation phases:
1. Positioning of the water cooler
in the undersink compartment;
2. Water connection;
3. Dispensing tap installaton
4. Filter cartridge and Co2 bottle
installation;
5. Power connection.
Package content
Unpack the appliance and check for
any damages occurred during
transportation. Move it carefully
avoiding falls or collisions that may
damage the refrigeration circuit.
The package contains the following
material:
4Spring water cooler
Dispensing tap
AB
Power cable
Filter cartridge
Cleaning and disinfecting cartridge
and liquid
Pipes installation kit
Attenzione
The correct functioning of the
cooler depends on a perfect
installation. Good air flow in
the cabinet is fundamental.
All data about power supply
and water connection must
comply with the technical
specifications chart.

installazione electrolux 11
Positioning of the water cooler
in the undersink compartment
Place the cooler far from
heat sources in a
compartment with
sufficient air flow
-This appliance needs free space
in the back.
-Leave at least 5 cm clearance on
the sides. We advice you to leave
more space around the filter
door for filter replacement
purposes. (Fig. 3)
Fig. 3

12 electrolux installazione
Connection to water supply
Fig. 4
Mod. A Mod. B
Fig. 5
Check the presence of the following
in the undersink compartment:
an intercepting tap for cold and hot
water line.
The lack of the above mentioned
items makes the connection
impossible. Please have your system
checked by a plumber installer.
Take the installation kit for water
supply and carry out the connection
as explained:
1. Replace hot water and cold
water flexible pipes with the
supplied kit (Fig. 4).
2. Connect the inlet pipe (H2O IN)
to the cold water union “T”;
3. Connect the dispensing tap to
the COLD H2O OUT pipe coming
out of the appliance;
4. Connect the dispensing tap to
the SODA OUT pipe coming out
of the appliance.
Warning
Only connect to cold
potable water supply Hot water
H2O IN
Warning Cold water
H2O pressure must be
between 2.0 and 3.5 bar.
In case of higher pressure,
a pressure reducer must
be installed by a plumber
installer.

primo avviamento electrolux 13
Installation of dispensing tap
Model A
The dispensing tap must be installed on
the edge of the sink or on the kitchen
top using the fixing ring or the pre-
drilled base plate fixed with screws
(Fig. 6).
Fig. 6
x
x

14 electrolux installazione
Model B
The dispensing tap must be installed on
the edge of the sink or on the kitchen top
using the fixing ring (Fig. 7).
Fig. 7

primo avviamento electrolux 15
Installation of filter cartridge and Co2 Bottle
Open the filter cartridge access door as
shown in Fig.8, undoing the 2 fixing
screws and pulling the panel towards
the left, to remove the hooks from the
fixed structure
Fig.8
Remove the cap and connect the filter
cartridge to the head rotating it
counter-clockwise (Fig. 9).
In case of water leaks, dry the whole
area with a cloth.
Fig. 9
Disposable bottle
Co2 bottle is on the left side of the
appliance. Remove the green cap and
screw the pressure reducer onto the
bottle. Make sure the Co2 bottle is
properly screwed (Fig. 10).
Open the valve on the reducer until
reaching a pressure of approx. 3 bar.
Pressure can be adjusted up to a max.
of approx. 4 bar to obtain a higher
carbonation level. To reach a good
carbonation level, it is necessary for
CO2 pressure to be =.5 bar higher than
water pressure.
Close the side door tightening its
screws.
Fig. 10

16 electrolux installazione
Electrical connection and first starting
Warning
Before plugging in the
appliance, make sure the
system voltage and
frequency match those on
the identification plate and
in the technical
specifications table.
Fig. 11
Only connect the appliance to a 230
V AC socket using the supplied plug.
The electrical system must comply
with all safety regulations in force.
Warning
The manufacturing company
declines any responsibility if
safety regulations are not
respected.
-Press the start button on the
front of the cooler;
-Set the thermostat on MAX cold
(Fig. 12);
-Rotate the tap left knob
clockwise to dispense flat (non-
carbonated) water and keep it
open for about 3 minutes to clear
the filter;
-4Springs is now ready to use.
Fig. 12

installation electrolux 17
How to dispense water
fredda frizzante
fredda piatta
fredda
chiuso
aperto
calda
Mod.A
Fig.13
123
1Knob for cold flat water
2Water from the mains
dispensing konb
3knob for cold sparkling water
e
Mod.B
Fig.14

18 electrolux primo avviamento
Water dispensing
Warning
In case of sudden lack of
water from the mains or low
water pressure while the
carbonating pump is working,
after 4 minutes the pump
protection device is activated
(see alarms)
Warning
If sparkling water tap is left
open to let water flow (i.e.
to fill a carafe), the water
flow can become irregular.
To prevent that from
happening and to avoid
emptying the Co2 bottle,
close the tap for about 20
secs then open again.

manutenzione electrolux 19
Alarms
Indicator lights Message
Fixed yellow
light
The filter is becoming depleted,
2400 litres of water have been
dispensed. Refer to the instructions for
replacing the filter cartridge on the
next page.
Fixed yellow and
red leds
Time to change the filter, 2,800 litres
of water have been dispensed. See
filter cartridge replacement
instructions.
Yellow and red
led blink
together
Dispensing is deactivated, 2,840 litres
have been dispensed. Replace the filter
to reactivate water dispensing. See
filter cartridge replacement
instructions.
Red led flashes Dispensing is deactivated. The anti-
flooding device is on. To reactivate the
appliance remove the water and dry
the bottom. Switch the appliance off
and then back on.
Yellow led
flashes slowly
Dispensing is deactivated. Pump
protection device is on. To reactivate
the appliance switch it off and then
back on.
Yellow led
flashes fast
Lack of water from the mains. To
eliminate the alarm switch the
appliance off and then back on.

20 electrolux allarmi
Maintenance and cleaning
Before any cleaning or
maintenance operation,
switch off and unplug the
appliance.
CO2 bottle replacement (for food)
When dispensed carbonated water becomes flat, it is time to replace the CO2
bottle as described below :
1. Access the undersink compartment.
2. Locate the bottle on the front of
the appliance. (Fig.15)
Fig. 15
3. Remove the bottle from the
compartment.
4. Holding the pressure reducer with
the left hand, rotate the bottle
clockwise (Fig. 16) to separate it
from the pressure reducer.
5. Screw down the new bottle onto
the reducer rotating it counter-
clockwise.
Fig. 16
6. Place the new bottle in the original
position on the front of the
appliance.