7
of the maintained temperature is from 0 to +40
°C). To increase the desired temperature, turn
the thermostat knob clockwise, to decrease -
counterclockwise.
Comfort mode
To set the required heating temperature and
maintain a constant room air temperature,
turn on the appliance at full power by moving
the thermostat control knob to the “max”
position. When the room temperature reaches
a comfortable level for you, slowly turn the
thermostat control knob counterclockwise
until you hear a click. Thus, the device will
remember the temperature that is comfortable
for you and will maintain it by automatically
switching on and off.
Transportation and storage
The device in the manufacturer's packaging
can be transported by all types of covered
transport with the exception of shocks and
movements inside the vehicle. The device
should be stored in the manufacturer's
packaging in a heated, ventilated room at
a temperature of +5 °C to +40 °C and an
average monthly relative humidity of 65% (at a
temperature of +25 °C).
After transportation at subzero temperatures,
it is necessary to keep the fan heater in
the room where it is supposed to be used
without being connected to the network for
at least 2 hours.
Completing units
• Fan heater;
• Handle;
• Support leg with latches;
• Screw (4 pieces);
• Operation manual;
• Warranty card;
• Packing.
Recycling
The time-expired appliance can’t be
disposed with household waste (2012/19/EU).
Warranty
Warranty service is performed according
to the terms specified in the “Warranty”
section.
Warranty:
• Warranty period for the item is two years
from the purchase date. If any defects
occur due to defects in materials and/or
workmanship during this two-year warranty
period, the item should be repaired
or replaced.
• Free maintenance or replacement
is possible only in case if convincing
evidence is provided, for example a stub,
which confirms that the day when
the service is requested, is within the
warranty period.
• The warranty does not cover products
and/or parts of the product that
are subjects to deterioration, may
be considered as expendable supplies
or which are made of glass.
• The warranty is void if the defect
is caused by damage ensuing by misuse,
poor maintenance (for example, a failure
occurred due to ingress of foreign objects
or liquids) or if changes or repairs were
performed by persons not authorized
by the Manufacturer.
• For the correct use of the product,
the user must strictly follow all included
in the manual instructions, and also
must avoid any action or manipulation
described as unwanted or indicated so
in this manual.
• These warranty restrictions do not affect
your statutory rights.
Support:
The support during and after the warranty
period is available in all countries where
the product is officially distributed. Please
contact your dealer for help.
Date of manufacture
The date of manufacture is indicated on
a sticker on the body of the appliance,
and also encrypted in Code-128. The date
of manufacture is determined as follows:
month and year of production
ENGLISH
