Elite Screens VMAX 2 Series User manual

Rev031113 www.elitescreens.com
Elite VMAX 2 Series
QUICK SET UP GUIDE
PRE INSTALLATION
1. Carefully unpack the screen
2. Always handle the screen in a leveled position on a clean surface.
3. In order to keep the screen from incurring any physical damages or blemishes to the material during
installation, do not let the screen come in contact with any foreign objects such as tools, hardware, dust,
liquids, etc.
INSTALLATION
Flush Wall Mounting
1. Mark the location of where the screen is to be
installed for the pre-drilled hole.
2. After marking the area and drilling the hole,
insert the proper screw into the drilled hole
and leave about 1/8” of an inch from the wall
to mount the screen.
3. Mount your screen from the keyhole located
on back of screen’s left and right end caps.
Suspended Ceiling Mounting
A suspended ceiling installation can be achieved
by using chains (not included) and attaching them
to the two top holes located on the ear of the end
caps as shown in the illustration.
Screen Operation
Once the screen has been connected to a power outlet, connect the included 3-way wall switch into the screen’s RJ45
port and press the DOWN button to drop the screen. Press the UP button to retract the screen up into the casing. The
middle button is to STOP the screen at any point.
The screen includes a built-in Infrared sensor for your IR remote. Simply point your IR remote at the round eye sensor
located on the front of your screen to remotely control your screen.
This is only a quick reference user guide. Please visit our website for a
complete USER GUIDE on your VMAX2 or Spectrum Series. For More
Information or tech support, please visit www.elitescreens.com
Keyhole
located on
back of
end cap
RJ45 port location
3-way wall switch
For a complete description of the
accessories your screen came
with, visit the user guide section at
www.elitescreens.com/ug

www.elitescreens.com
Suggested Optional Accessories:
1. In-Wall up/down Switch –Controlsthe screen’spower cycle like a light switch
2. Universal Wireless Projector Trigger- For projectorsthat don’t have 12V trigger
outputs. The projector’s on/off cycle will raise and lower the screen wirelessly.
3. Wireless 5-12V Trigger –No hassle of running wires from the projector to the
screen. (The projector must have a 12V trigger output.)
On-Line User Guide or Download
线上说明书或下载 / 線上說明書或下載
オンラインユーザーマニュアル／ダウンロード
Manual del usuario on-line o descargar
On-Line-Benutzerhandbuch oder Herunterladen
Manuel de l'utilisateur en ligne ou télécharger
On-Line manuale d'uso o download
ออนไลน์ใช ้ คู่มือหรือดาวน์โหลด
On-Line Руководство пользователя или скачать
On-line Manual de utilizare sau de descărcare
Hướngdẫnsửdụngtrựctuyến hay tảixuống

󰫦
온라인사용자설명서또는다운로드
On-Line Instrukcja obsługi lub pobierania
On-Line Manual do Usuário ou Download
BukuPanduan Online atauunduh
www.elitescreens.com/UG