
OPERATING MANUAL
ELPRO CONTROLS,
Ahmedabad, Gujarat, INDIA
www.elprocontrols.com
PROGRAMMING MODE
Press SET key for 2 seconds to enter in programming mode.
PRG indication glow & Display LAT for 2 seconds and then latitude value.
Set latitude of location by ▲ / ▼ key.
Press ENT key. Display LonG for 2 seconds and then longitude value.
Set longitude of location ▲ / ▼ key.
Same way set SroF (Sunrise offset time in minute), SSoF (Sunset offset time in minute),
YEAr , MotH & dAtE.
NOTE : Sunrise & Sunset offset range : -45 to 45 Minute
Example : Latitude & Longitude For Ahmedabad Location
LAT = 23.03
LonG = 72.58
SroF = -15 means Switch OFF LOAD 15 minute before Sunrise
SSoF = 3 means Switch ON LOAD 3 minute after Sunset
NIGHT OFF MODE SETTINGS
Press UP key for 2 seconds to enter in night off mode.
PRG indication glow & Display noFF for 2 seconds and then night off time.
Set night off time by ▲ / ▼ key. (Setting Range : 21.00 PM to 03.00 AM)
Press ENT key. Display non for 2 seconds and then night on time.
Set night on time by ▲ / ▼ key. (Setting Range : 03.00 AM to 08.00 AM)
Press ENT key to exit from night off mode settings.
Example : noFF = 23.59 means switch off @11.59PM in the night.
non = 05.00 means switch on @05.00AM in the morning.
Thus, switch off load in night time 11.59PM to 5.00AM.
NOTE : Default night OFF & night ON time = 3.00 means NIGHT OFF MODE bypass.
RESET FUN TION
Press ▼ key for 2 seconds.
Display –rST for 2 seconds and all data and clock value reset to factory default value.
BYPASS FUN TION
To enter bypass mode, press ENT key for 2 seconds.
Display bYPS, override the SUNSET & SUNRISE time settings & unit continuously ON