
OPERATING MANUAL
ELPRO CONTROLS,
Ahmedabad, Gujarat, INDIA
www.elprocontrols.com
PROGRAMMING MO E
Press SET key for 2 seconds to enter in programming mode.
PRG indication glow & isplay LAT for 2 seconds and then latitude value.
Set latitude of location by ▲ / ▼ key.
Press ENT key. isplay LonG for 2 seconds and then longitude value.
Set longitude of location ▲ / ▼ key.
Same way set SroF (Sunrise offset time in minute), SSoF (Sunset offset time in minute),
YEAr , MotH & dAtE.
NOTE : Sunrise & Sunset offset range : -45 to 45 Minute
Example : Latitude & Longitude For Ahmedabad Location
LAT = 23.03
LonG = 72.58
SroF = -15 means Switch OFF LOA 15 minute before Sunrise
SSoF = 3 means Switch ON LOA 3 minute after Sunset
RESET FUNCTION
Press ▼ key for 2 seconds.
isplay –rST for 2 seconds and all data and clock value reset to factory default value.
AUTO/BYPASS SWITCH FUNCTION
AUTO – In AUTO function, unit operate automatically as per SUNSET & SUNRISE.
BYPASS – In BYPASS function, override the SUNSET & SUNRISE time & unit
continuously ON and display bYPS.
NIGHT OFF MO E SETTINGS (FOR ELSTRO-NOFF MO EL)
Press UP key for 2 seconds to enter in night off mode.
PRG indication glow & isplay noFF for 2 seconds and then night off time.
Set night off time by ▲ / ▼ key. (Setting Range : 21.00 PM to 03.00 AM)
Press ENT key. isplay non for 2 seconds and then night on time.
Set night on time by ▲ / ▼ key. (Setting Range : 03.00 AM to 06.00 AM)
Press ENT key to exit from night off mode settings.
Example : noFF = 23.59 means switch off @11.59PM in the night.
non = 05.00 means switch on @05.00AM in the morning.
Thus, by ELSTRO-NOFF model, switch off load in night time 11.59PM to 5.00AM.