Elsner Cala KNX AQS/TH Guide

Item numbers
Cala KNX AQS/TH: 70603 (black), 70608 (white)
Cala KNX TH: 70602 (black), 70607 (white)
Cala KNX T: 70601 (black), 70606 (white)
EN
Cala KNX
Indoor climate sensors with touch display
Illustration with frame (not included in the deliverables)
Installation and Adjustment

1 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Sensor with Cala KNX display • from ETS programme version 1.0 •
Version: 13.03.2017. Technical changes and errors excepted.
1. Description ........................................................................................... 5
1.0.1. Deliverables ................................................................................................... 6
1.1. Technical specifications ........................................................................................... 7
1.1.1. Measuring accuracy ...................................................................................... 8
2. Installation and commissioning ........................................................... 8
2.1. Installation notes ...................................................................................................... 8
2.2. Installation location .................................................................................................. 9
2.3. Device design ........................................................................................................... 9
2.4. Sensor assembly .................................................................................................... 10
2.5. Notes on mounting and commissioning .............................................................. 11
3. Addressing the equipment ................................................................. 11
4. Maintenance and care ........................................................................ 11
5. Operating the device via the touch display ....................................... 13
5.1. Menu overview ....................................................................................................... 14
5.2. Device settings ....................................................................................................... 15
5.2.1. Display settings ........................................................................................... 15
5.2.2. Button tone .................................................................................................. 19
5.2.3. Version ......................................................................................................... 20
5.3. Sensor system (measured value display) ............................................................ 20
5.4. Temperature control .............................................................................................. 22
5.5. Light ......................................................................................................................... 23
5.6. Drive (shading, window) ........................................................................................ 25
6. Transfer protocol ............................................................................... 27
6.1. List of all communications objects ....................................................................... 27
7. Setting the parameters and functions for all models ........................ 45
7.1. Behaviour on power failure/ restoration of power .............................................. 45
7.2. General settings ..................................................................................................... 45
7.3. Display ..................................................................................................................... 45
7.4. Button tone ............................................................................................................. 47
7.5. Menus ...................................................................................................................... 47
7.5.1. Settings ........................................................................................................ 48
7.5.2. Sensor system ............................................................................................. 48
7.5.3. Temperature control ................................................................................... 48
7.5.4. Light 1-3 ....................................................................................................... 49
7.5.5. Drive 1-3 ...................................................................................................... 50
7.6. Variable comparator .............................................................................................. 50
7.6.1. Control variable comparator 1/2/3/4 .......................................................... 50
7.7. Computer ................................................................................................................ 51
7.7.1. Computers 1-8 ............................................................................................. 51
7.8. Logic ........................................................................................................................ 55
7.8.1. AND logic 1-8 and OR logic outputs 1-8 ................................................... 55
7.8.2. Connection inputs of the AND logic .......................................................... 57
7.8.3. Connection inputs of the OR logic ............................................................. 60
7.9. Button interfaces .................................................................................................... 60

2 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Sensor with Cala KNX display • from ETS programme version 1.0 •
Version: 13.03.2017. Technical changes and errors excepted.
7.9.1. Interface 1-4 ................................................................................................. 60
7.9.2. Control modes for drive control ................................................................ 63
8. Temperature parameter settings ....................................................... 66
8.1. Temperature Measurement ................................................................................... 66
8.2. Temperature threshold values .............................................................................. 66
8.2.1. Threshold value 1, 2, 3, 4 ........................................................................... 66
8.3. Temperature PI control .......................................................................................... 69
8.3.1. Heating control level 1/2 ............................................................................. 74
8.3.2. Cooling control level 1/2 ............................................................................. 76
8.4. Summer Compensation ......................................................................................... 78
9. Humidity parameter settings ............................................................. 80
9.1. Humidity Measurement ......................................................................................... 80
9.2. Humidity threshold values .................................................................................... 80
9.2.1. Threshold value 1, 2, 3, 4 ........................................................................... 81
9.3. Humidity PI control ................................................................................................ 83
9.4. Dewpoint measurement ........................................................................................ 86
9.4.1. Cooling medium temp. monitoring ........................................................... 86
9.5. Absolute humidity .................................................................................................. 88
9.6. Comfort field ........................................................................................................... 89
10. CO2parameter settings ..................................................................... 90
10.1.CO2 Measurement ................................................................................................. 90
10.2.CO2 threshold values ............................................................................................ 90
10.2.1.Threshold value 1, 2, 3, 4 ........................................................................... 91
10.3.CO2 PI-control ........................................................................................................ 93

3 Clarification of signs
This manual is amended periodically and will be brought into line with new software
releases. The change status (software version and date) can be found in the contents footer.
If you have a device with a later software version, please check
www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-
date version of the manual is available.
Clarification of signs used in this manual
Installation, inspection, commissioning and troubleshooting of the device
must only be carried out by a competent electrician.
Safety advice.
Safety advice for working on electrical connections, components,
etc.
DANGER! ... indicates an immediately hazardous situation which will lead to
death or severe injuries if it is not avoided.
WARNING! ... indicates a potentially hazardous situation which may lead to
death or severe injuries if it is not avoided.
CAUTION! ... indicates a potentially hazardous situation which may lead to
trivial or minor injuries if it is not avoided.
ATTENTION! ... indicates a situation which may lead to damage to property if it is
not avoided.
ETS In the ETS tables, the parameter default settings are marked by
underlining.