Emerson Rosemount 3410 Series User manual

Quick Start Guide
00825-0100-3104, Rev AA
June 2022
3410/3810 Series Local Display Field
Install Kit

Safety and approval information
This Rosemount product complies with all applicable European directives when properly installed in
accordance with the instructions in this manual. Refer to the EU declaration of conformity for directives
that apply to this product. The EU declaration of conformity, with all applicable European directives,
and the complete ATEX Installation Drawings and Instructions are available on the internet at
www.emerson.com or through your local Emerson support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found
on the internet at http://www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be
found in the user manual. Product data sheets and manuals are available from the Emerson website at
http://www.emerson.com.
Return policy
Follow Emerson procedures when returning equipment. These procedures ensure legal compliance
with government transportation agencies and help provide a safe working environment for Emerson
employees. Emerson will not accept your returned equipment if you fail to follow Emerson procedures.
Return procedures and forms are available on our web support site at Emerson.com, or by phoning the
Emerson Customer Service department.
Emerson Flow customer service
Email:
•Worldwide: http://[email protected]
•Asia-Pacific: http://[email protected]
Telephone:
North and South America Europe and Middle East Asia Pacific
United States 800 522 6277 U.K. 0870 240 1978 Australia 800 158 727
Canada [phone] The
Netherlands
[phone]
666
New Zealand 099 128 804
Mexico [phone]
111
France 0800 917 901 India 800 440 1468
Argentina [phone] Germany 0800 182 5347 Pakistan 888 550 2682
Brazil [phone] Italy 8008 77334 China [phone]
Central &
Eastern
[phone]
111
Japan [phone]
Russia/CIS [phone] South Korea [phone]
Egypt 0800 000 0015 Singapore [phone]
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
Quick Start Guide February 2022
2 Local Display Field Install Kit

North and South America Europe and Middle East Asia Pacific
UAE 800 0444 0684
February 2022 Quick Start Guide
Quick Start Guide 3

Signal words and symbol
Pay special attention to the following signal words, safety alert symbols and statements:
Safety alert symbol
This is a safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER
Danger indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Warning indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Caution indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Notice is used to address safety messages or practices not related to personal injury.
Important
Important is a statement the user needs to know and consider.
Tip
Tip provides information or suggestions for improved efficiency or best results.
Note
Note is “general by-the-way” content not essential to the main flow of information.
Contents
Component disassembly..............................................................................................................5
Component assembly................................................................................................................ 10
Quick Start Guide February 2022
4 Local Display Field Install Kit

1 Component disassembly
1.1 Local display field install kit includes
A. LCD display board
B. LCD display shroud
C. Pan HD screw PH SEMS #6-32 X .38 M/S W/410 EXT 18-8 SST
D. LCD module
E. Cover – HSG LCD type FB100
F. O-ring #2-245
G. Backplane board 3410/3810
H. Pan HD screw PH SEMS #6-32 X .88
•Preassembled assemblies and parts:
—LCD display board, shroud, LCD module
—Cover – Housing (glass end cap) with O-ring
—Backplane board
—Pan HD screws #6-32 X .88
1.2 Local display field install kit parts list
Item(1) Quantity Description
Preassembled:
LCD display field install kit
February 2022 Quick Start Guide
Quick Start Guide 5

Item(1) Quantity Description
A 1 LCD display board
B 1 LCD display shroud
C 2 Pan HD screw PH SEMS #6-32 X .38 M/S W/410 EXT
18-8 SST
D 1 LCD module
Preassembled:
E 1 Cover – HSG LCD type FB100
F 1 O-ring #2-245
G 1 Backplane board 3410/3810
H 4 Pan HD screw PH SEMS #6-32 X .88
(1) Item numbers correlate with DMC-009079 - 3410/3810 Series LCD Module
1.3 Check firmware version before powering off the meter
Application options:
•MeterLink
•AMS® Device Manager
Quick Start Guide February 2022
6 Local Display Field Install Kit

•Field Communicator
•Requirements: Firmware Version 1.06 and Uboot Version January 31,
2013 or later
•If necessary to upgrade firmware
—Open MeterLink™ and connect to the meter
—Open an Internet browser
—Navigate to the Emerson website: emerson.com/Rosemount
—Use Quick Links and click MeterLink Registration and Download to
access the latest firmware
—Go to MeterLink and use the Tools|Program Download menu to
download a file to the meter. Click Open to display an Open
Download File dialog. Select the desired file and click Open.
MeterLink only downloads components that are different than what
is currently installed in the meter.
1.4 Remove power to the equipment and remove
transmitter electronics enclosure endcaps
•Remove endcap security seals, if installed, and security latches.
•Remove power from equipment before removing endcaps if possible
and/or ensure explosive atmosphere is not present before opening the
transmitter electronics enclosure.
•Unplug CPU Module terminal board connectors (TB-1 and TB-2).
•Unplug I/O Module, and Power Supply terminal board connectors.
•Pull the CPU and I/O Modules from the enclosure.
February 2022 Quick Start Guide
Quick Start Guide 7

A. CPU TB-2
B. CPU TB-1
C. I/O module connectors
D. 24V loop power
E. 10.4VDC - 36VDC power
1.5 Remove the backplane board
A. Backplane board
B. I.S. barrier board
C. Power supply board
•Remove four screws with lock washers.
•Pull Backplane from housing.
•Remove Power Supply and I.S. Barrier boards from Backplane.
Quick Start Guide February 2022
8 Local Display Field Install Kit

1.6 Disconnect the acquisition cable
A. Acquisition cable
February 2022 Quick Start Guide
Quick Start Guide 9

2 Component assembly
2.1 Backplane board with 14 pin connector
A. 14 pin connector
B. Backplane board
Note
Check existing 3410/3810 Series Backplane board minimum for 14 pin
connector (J8).
If equipped, use this board. If not, use board included with the Local Display
Field Install Kit.
A. Acquisition cable
•Attach acquisition cable to backplane
•Tighten connector screws
Quick Start Guide February 2022
10 Local Display Field Install Kit

2.2 Plug power supply board and I.S. barrier module onto
backplane board with 14 pin connector
A. I.S. barrier board
B. Backplane board
C. Power supply board
2.3 Plug local display board into the backplane 14 pin
connector
A. 14 pin connector
B. Local display board
•Make sure LCD board is fully seated to backplane 14 pin connector.
February 2022 Quick Start Guide
Quick Start Guide 11

2.4 Slide backplane, power supply, I.S. barrier module and
local display module assembly into transmitter enclosure
and fasten with 4 pan head screws.
•Make sure boards are aligned in the enclosure and I.S. barrier board is
inside card cage key retainer.
•Use the long Pan HD Screws #6-32 X .88 provided with the kit.
2.5 Install endcap with sight glass
•Make sure endcap O-ring is installed.
Quick Start Guide February 2022
12 Local Display Field Install Kit

2.6 Reinstall CPU module and I/O module in the enclosure
2.7 Install CPU module TB-1 and TB-2 and I/O module
terminal connectors
A. CPU TB-2
B. CPU TB-1
C. I/O module connectors
February 2022 Quick Start Guide
Quick Start Guide 13

2.8 If explosive atmosphere is not present, connect the
power supply terminal connectors and apply power to
the unit
A. 24V loop power
B. 10.4VDC - 36VDC power
•Ensure all CPU LEDs are green
A. CPU LEDs
•Observe Local Display startup sequence (see Observe local display
startup sequence)
Quick Start Guide February 2022
14 Local Display Field Install Kit

2.9 If explosive atmosphere is present, install endcaps and
apply site power to equipment
A. Endcap security latch
•Reinstall endcap security latches
•Apply site power
Note
If explosive atmosphere is present and site power initializes the unit, a
Service technician should observe the Local Display startup sequence (see
Observe local display startup sequence).
2.10 Observe local display startup sequence
A. Local display
B. Startup sequence – All segments displayed
•Two seconds after power up, the “Rosemount” logo appears at the
bottom of the LCD screen.
•The Checksum displays.
February 2022 Quick Start Guide
Quick Start Guide 15

•Make sure all segments are displayed (all the segments will come on and
stay on for about 4 seconds). Pay careful attention and make sure that all
segments are functioning and no segments are missing.
•The Wait command displays, and then the four default Display Items
scroll on the display.
2.11 Configure display items, measurement units, and scroll
delay
Configuration applications options:
•MeterLink™ - Field Setup Wizard
•AMS® Device Manager
•Field Communicator
•Reference manuals:
—HART® Field Device Specification 3410 Series Gas Ultrasonic Meters
—HART Field Device Specification 3810 Series Liquid Ultrasonic Meters
—3410 Series Gas Ultrasonic Meters Installation Manual
—3810 Series Liquid Ultrasonic Meters Installation Manual
—3812 Liquid Ultrasonic Meters Installation Manual
Quick Start Guide February 2022
16 Local Display Field Install Kit

2.12 Reinstall wire security seals on the endcaps, if necessary
Installation complete
A. 3410/3810 series transmitter with local display
February 2022 Quick Start Guide
Quick Start Guide 17

Quick Start Guide February 2022
18 Local Display Field Install Kit

February 2022 Quick Start Guide
Quick Start Guide 19

Quick Start Guide
00825-0100-3104, Rev. AA
June 2022
For more information: www.emerson.com
©2022 Emerson. All rights reserved.
Unauthorized duplication in whole or part
is prohibited. Printed in the USA.
The Emerson logo is a trademark and
service mark of Emerson Electric Co. All
other trademarks are the property of their
respective companies.