Emerson Interceptor II TVSS User manual

Surge and Signal Protection
for Business-Critical Continuity
Liebert Interceptor®II TVSS
Setting the Standard for Facility-Wide Protection

2
The Capacity to Handle the Surges;
The Footprint that Saves You Space
Today’s businesses demand more protection from their surge suppression
products. A power disturbance can strike at any time, causing a loss of data,
productivity and money. Customers require systems that will consistently
provide clean power and safeguard their equipment from the substantial
costs of power disturbances.
Features
nBuilt-In-Testing - The Liebert Interceptor II comes equipped with a
built-in testing circuit that monitors MOV/fuse link status. The built-in
testing can be operated by the simple push of a button on the display
panel, and testing can occur at any voltage within the continuous
operating voltage range, even during a transient event. No other surge
manufacturer offers this monitoring capability as a standard feature.
nPrecise Current Sharing Assures Performance and Long Life - High
Energy current diversion is handled by a sophisticated parallel system
of computer matched, custom metal-oxide varistor (MOV) array.
nProtection From Exteme Voltage Conditions - Individual
component-level fusing coordinates to ensure each unit is safeguarded.
nLowest Clamping Voltages - through use of low impedance copper
conduction plates.
nReal-time Status Indication - internal and external LED's, audible
alarms and Form C contacts activate when protection is reduced or
phase loss/undervoltage conditions are detected.
nBest-in-Class Capacitive Filtering - for excellent ringwave transient
attenuation.
nStringent 3rd Party Testing - for surge current capacity, life cycle,
EMI/RFI noise rejection, fault interrupt current and industry safety
approvals.
n10-Year Warranty for parts and 5-Year on-site labor

Code Code Code Code Code Code Code Code
SI016 160kA 120 120V N 1 Phase L-N 2+W+GND A All N Wire Lugs S E NEMA 4
025 250kA 208 208V L1 Phase L-L 2W +GND R Disconnect N Caseless
032 320kA 220 220V SSplit Phase 3W+GND
040 400kA 230 230V Y3 Phase Wye 4W+GND
050 500kA 240 240V D3 Phase Delta 3W+GND
060 600kA 277 277V X 3 Phase Wye 3W+GND
075 750kA 480 480V H 3 Delta Hi-Leg 4W+GND
100 1000kA
3
Surge Connection A B C D E F Weight
160kA Wire lugs 16 12 9 17.25 9.5 0.44 35
250kA Disconnect16 16 9 17.25 10 0.44 45
320kA Wire lugs 16 12 9 17.25 9.5 0.44 45
500kA Disconnect 16 16 9 17.25 10 0.44 55
600kA Wire lugs 20 16 9 21.25 10 0.44 55
750kA Disconnect 20 20 9 21.25 14 0.44 85
Wire lugs 20 20 9 21.25 14 0.44 85
Disconnect 20 24 9 21.25 18 0.44 95
Interceptor Choose Choose Choose Choose Choose Choose Choose
Series Surge Current Voltage Voltage Modes of Type of Monitoring Enclosure
Rating (L-G) Configuration Protection Connection Option Type
EXAMPLE
SI 016 1 2 0 Y A R D E
Liebert Interceptor®II Surge Suppression 160kA - 1000kA.
System B3 6kv/500A B3/C1 C3
Voltage Mode Ringwave Comb.Wave Comb.Wave Comb.Wave
120/208 L-N 328/344 308/312 376/376 452/536
120/208 L-G 340/348 320/316 364/368 444/584
120/208 L-L 464/448 576/568 680/652 792/832
120/208 N-G 344 284 344 468
277/480 L-N 520/536 532/528 800/800 912/952
277/480 L-G 736/760 688/688 760/776 840/896
277/480 L-L 736/776 720/728 1480/1416 1656/1600
277/480 N-G 736 648 760 896
System Voltage L-N L-G N-G L-L
120/240 330V 400V 400V 600V
120/208
240 N/A 800V N/A 800V
230/400 700V 800V 600V 1200V
277/480
480 N/A 1200V N/A 1500V
*Other modes
of protection
available; Call
factory.
UL 1449 Clamping Data (Second Edition)
NEMA LS 1 Test Data (without disconnect/with disconnect)
Chart A – Liebert Interceptor®II Model Selection
Chart B – Liebert Interceptor®II Dimensional Data
1,000kA
How To Specify The Appropriate Model:
All Liebert Interceptor II model numbers begin with the SI prefix. Use Chart A to build your Liebert Interceptor II starting with the Surge Rating column.
Moving left to right, choose the correct configurations from each column for your application. Your completed model number should look similar to the
example below or SI016120YARDE. Refer to Chart B for Liebert Interceptor II dimensional data.
AD
CB
E
F
Standard Monitoring
LEDs, Audible Alarm,
Form C Contacts
C Standard Monitoring
Plus Single Surge
Counter
DStandard Monitoring
Plus Dual Surge and
Swell Counters
Connection Type Parallel Connected
Agency Listings UL1449, UL1283, cUL, FCC Part 15 Class B
Operating Voltage Range + / - 15%
Fault Current Rating (AIC) 200kAIC
Operating Frequency Range 47 - 63 Hertz
50 ohm EMI/RFI Attenuation 100kHz 41 dB
1MHz 31 dB
10MHz 35 dB
100MHz 53 dB
Protection Modes All applicable modes standard (Line to Neutral, Line
to Ground, Neutral to Ground and Line to Line)
Response Time <0.5 nanoseconds
Temperature -40 to +60 degrees C
Operating Humidity 0% to 95% noncondensing
Status Indication LEDs, Dry Contacts, Audible Alarm
Enclosure NEMA 4 standard
Altitude 0 to 18,000 feet
Audible Noise Less than 45 dBa
Warranty 10-Years Parts and 5-Years On-Site Labor
*Other enclosure
options available;
Call factory.

Emerson Network Power.
The global leader in enabling Business-Critical Continuity.
EmersonNetworkPower.com
AC Power Systems
Connectivity
DC Power Systems
Embedded Power
Integrated Cabinet Solutions
Outside Plant
Power Switching & Controls
Precision Cooling
Site Monitoring
Surge & Signal Protection
Services
Liebert Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. &
Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
7/F., Dah Sing Financial Centre
108 Gloucester Rd, Wanchai
Hong Kong
852 25722201 Phone
852 28029250 FAX
liebert.com
Technical Support
800 288 6169 Toll-Free
607 724 2484 Phone
607 722 8713 Fax
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co.
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2006 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert and the Liebert logo are registered trademarks
of the Liebert Corporation.
SL-22005 (R4/06) Printed in USA
Ensuring The High Availability Of
Mission-Critical Data And Applications.
Emerson Network Power, the global leader in enabling business-critical continuity,
ensures network resiliency and adaptability through a family of technologies —
including Liebert power and cooling technologies — that protect and support
business-critical systems. Liebert solutions employ an adaptive architecture that
responds to changes in criticality, density and capacity. Enterprises benefit
from greater IT system availability, operational flexibility, and reduced capital
equipment and operating costs.