Empire Comfort Systems EMBF11S Series User manual

23686-0-0507 Page 1Empire Comfort Systems, Inc. • 918 Freeburg Avenue • Belleville, IL 62222 • PH: 618-233-7420 • FAX: [phone]
3. Position breastboard assembly to the front of left side as-
sembly and right side assembly.
4. Use six (6) 1 1/4” screws to attach breastboard assembly to
left side assembly and right side assembly.
MANTEL ASSEMBLY INSTRUCTIONS
EMBF11S SERIES
FULL CABINET MANTEL
EFFECTIVE DATE MAY 2007
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
1. Place back base in desired location. Place fireplace on base
and route gas line to fireplace.
2. Position left side assembly and right side assembly against
base.
(6) 1/4” SCREWS

23686-0-0507Page 2 Empire Comfort Systems, Inc. • 918 Freeburg Avenue • Belleville, IL 62222 • PH: 618-233-7420 • FAX: [phone]
8. Slide short base under front of mantel assembly.
9. Place mantel top onto mantel assembly.
10. Install mantel trim.
11. Install fiber logs per the Log Placement section in the Instal-
lation Instructions included with your fireplace unit.
5. Attach “L Bracket” to top of firebox to secure mantel to
firebox.
6. Attach back plate to left and right side assemblies through
the predrilled holes using the four (4) screws provided, two
screws per side.
7. Attach unit to studs in the wall through the "back plate" us-
ing two 2 1/2" drywall screws provided.