manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. EMS
  6. •
  7. Control Unit
  8. •
  9. EMS FireCell FCZ-170-111 User manual

EMS FireCell FCZ-170-111 User manual

Other manuals for FireCell FCZ-170-111

2

This manual suits for next models

2

Other EMS Control Unit manuals

EMS FireCellWDC User manual

EMS

EMS FireCellWDC User manual

EMS ZITON RADIO LOOP MODULE Owner's manual

EMS

EMS ZITON RADIO LOOP MODULE Owner's manual

EMS LRP2000 Series User manual

EMS

EMS LRP2000 Series User manual

EMS EC-41-0200 User manual

EMS

EMS EC-41-0200 User manual

EMS fusion FCX-532-001 User manual

EMS

EMS fusion FCX-532-001 User manual

EMS EMS520 User manual

EMS

EMS EMS520 User manual

EMS FireCell FCZ-170-111 User manual

EMS

EMS FireCell FCZ-170-111 User manual

EMS ZITON Owner's manual

EMS

EMS ZITON Owner's manual

EMS EC-41-0200 User manual

EMS

EMS EC-41-0200 User manual

EMS Fusion FCX-532-001 User manual

EMS

EMS Fusion FCX-532-001 User manual

Popular Control Unit manuals by other brands

Festo Compact Performance CP-FB6-E Brief description

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation MPC3034A user manual

JS Automation

JS Automation MPC3034A user manual

JAUDT SW GII 6406 Series Translation of the original operating instructions

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum Air Module System manual

Spektrum

Spektrum Air Module System manual

BOC Edwards Q Series instruction manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS BT Magic quick start

KHADAS

KHADAS BT Magic quick start

Etherma eNEXHO-IL Assembly and operating instructions

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations Attenuverter Assembly guide

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA VARIVENT Operating	 instruction

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik VMS-05 Assembly instructions

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix LINQ8PD Installation and programming manual

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton Powerware Series user guide

Eaton

Eaton Powerware Series user guide

WAGO 750-407/040-000 manual

WAGO

WAGO 750-407/040-000 manual

Sony CCU-590 Operation manual

Sony

Sony CCU-590 Operation manual

Graco 25D614 instructions

Graco

Graco 25D614 instructions

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini SPV-U Series manual

Shini

Shini SPV-U Series manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

1Pre installation
5 Power device
3 Disassemble device
2Components
device
unpowered
(pins unlinked)
device
powered
(both pins linked)
!
Installation must conform to applicable local installation
codes and
should only be installed by a fully trained
competent person.
Ensure that the device is installed as per the site survey.
The use of a non-metallic spacer should be considered if
mounting the device on to a metal surface.
DO NOT press the log on button on a pre-programmed
device. This will cause communication with the control panel
to be lost. Should this happen, delete the device from the
system and add it back on.
This device contains electronics that may be susceptible to
damage from Electrostatic Discharge (ESD). Take appropriate
precautions when handling electronic boards.
Wireless module Mounting plate
6 Optional locking
To lock the remote indicator
into the wireless module,
remove the cut out section
as shown.
Disengage the mounting
plate by turning the wireless
module anticlockwise, whilst
pressing down the locking
pin.
Once powered, reassemble the device.
Wireless Remote Indicator Module
Installation Guide
FCX-178-001 Wireless Remote Indicator Module
FCZ-170-111 Remote Indicator Wireless Module Only
117261 Remote Indicator Only
Example shown:
Model FCX-178-001
Part no Product description
23
Remote indicator
1
When fitting / replacing batteries; observe correct polarity,
using only specified batteries.
Connect the power jumper across the PIN header.
31 2
First disengage the remote indicator from the wireless module
by turning it anticlockwise. This exposes the wireless module’s
locking pin as shown.
www.emsgroup.co.uk
Wireless Detector Base
PRESS HERE TO
LOG ON
Part No: FCZ-170-111
4 Fix mounting plate
Use all four mounting holes to ensure a firm fixing.
Use suitable fasteners and fixings.
THIS WAY UP
WHEN WALL
MOUNTING
When wall mounting, ensure the mounting plate is fitted in the
orientation shown.
www.emsgroup.co.uk
Wireless Detector Base
PRESS HERE TO
LOG ON
Part No: FCZ-170-111
Locking pin
©2021 EMS Ltd. All rights reserved Page 1 of 2 TSD116-99 Iss 5 24/11/2021 AJM
7 Configuration
The device’s loop address is configured within the user interface’s
menu structure.
Refer to the Wireless remote indicator programming instructions
(TSD115) for full programming details.
Free to download from
www.emsgroup.co.uk
Operating
temperature -10 to +55 °C
Storage
temperature 5 to 30 °C
Humidity 0 to 95% non-condensing
Supply 6x AA alkaline (Panasonic LR6AD Powerline /
Varta 4006 Industrial)
CAUTION!
Fitting of an incorrect battery type invalidates the product certification and
may result in poor performance.
IP rating IP23
Operating
frequency 868 MHz
Output
transmitter
power Auto adjusting 0 to 14 dB (0 to 25 mW)
Dimensions (Ø x D) 113 x 81 mm
Weight 0.40 kg
Location Type A: For indoor use
2012/19/EU (WEEE directive):
Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this
product to your local supplier upon purchase of
equivalent new equipment, or dispose of it at
designated collection points. For more information
see www.recyclethis.info
Dispose of your batteries in an environmentally
friendly manner according to your local
regulations.
European Union
directives
EMS declares that this device is in compliance with
Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the
following internet address:
www.emsgroup.co.uk
Certification
Certification body
CPR DoP 0359-CPR-00127
0905
10
Specification
E
N54-25:2008. Incorporating corrigenda September
2010 and March 2012. Fire detection and fire alarm
systems.
Part 25: Components using radio links
Approved to
Regulatory information
Manufacturer Carrier Manufacturing Polska Sp. Z o.o. Ul.
Kolejowa 24. 39-100 Ropczyce, Poland
Year of
manufacture See devices serial number label
To unlock the device, insert
a flat bladed screwdriver
into the release slot and
turn the remote indicator
anticlockwise to release, as
shown.
6 Unlocking
©2021 EMS Ltd. All rights reserved Page 2 of 2 TSD116-99 Iss 5 24/11/2021 AJM