Enable-IT 860 Series User manual

All Rights Reserved 1997 - 2011 ENABLE-IT-Proprietary and Confidential
Ethernet Extension Experts
Enable-IT 860 Rev E
Ethernet Extender Kit
User Manual


Page 2 of 14 Ethernet Extension Experts
Copyright © 1997-2011 Enable-IT, Inc. All rights reserved. No part of this documentation
may be reproduced in any form or by any means or used to make any derivative work (such
as translation, transformation, or adaptation) without written permission from Enable-IT, Inc.
Enable-IT, Inc reserves the right to revise this documentation and to make changes in
content from time to time without obligation on the part of Enable-IT, Inc to provide
notification of such revision or change.
Enable-IT, Inc provides this documentation without warranty, term, or condition of any kind,
either implied or expressed, including, but not limited to, the implied warranties, terms or
conditions of merchantability, satisfactory quality, and fitness for a particular purpose.
Enable-IT, Inc may make improvements or changes in the product(s) and/or the
program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished
under a license agreement included with the product as a separate document, in the hard
copy documentation. If you are unable to locate a copy, please contact Enable-IT, Inc and a
copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software
described herein are provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at
private expense. Software is delivered as "Commercial Computer Software" as defined in
DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101 (a)
and as such is provided with only such rights as are provided in Enable-IT, Inc's standard
commercial license for the Software.
Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov
1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or
deface any portion of any legend provided on any licensed program or documentation
contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, Enable-IT, Inc registered trademarks are registered in the
United States and may or may not be registered in other countries

Page 3 of 14 Ethernet Extension Experts
CONTENTS
ABOUT THIS GUIDE 4
1 INTRODUCING THE ENABLE-IT 860 ETHERNET EXTENDER KIT 5
About the 860 Rev E Ethernet Extender Kit 5
Key Benefits 6
Summary of Features 6
Typical Use Applications 7
2 INSTALLING THE ENABLE-IT 860 ETHERNET EXTENDER UNITS 8
Site Plan – Installation Design Considerations 8
Unpacking the 860 Ethernet Extender Kit 9
Perform an out of the box Test 9
Performing the On-Site Installation 9
Mounting the 860 Ethernet Extender Kit 10
Building the 860 Interlink wiring 10
Attaching cabling and devices 10
Troubleshooting & Performance Settings (DIP switch) 11
3 TECHNICAL SUPPORT
Online Technical Services 11
World Wide Web Site 11
Returning Products for Repair 11
4ENABLE-IT INC.LIMITED WARRANTY 12
5CONTACT US 14

Page 4 of 14 Ethernet Extension Experts
ABOUT THIS GUIDE
This guide provides all the information needed to install and use the Enable-IT
860 Ethernet Extender Kit. This guide is intended for use by technicians who are
responsible for installing and setting up network equipment. Consequently, it is
assumed that the installer has a basic working knowledge of LANs (Local Area
Networks) and voice telecom wiring.
If the information in the release notes that are shipped with your product differs
from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the Enable-IT World Wide
Web site: http://www.ethernetextender.com/manuals/860 Manual.pdf

Page 5 of 14 Ethernet Extension Experts
INTRODUCING THE 860 ETHERNET EXTENDER KIT
Congratulations on purchasing the Enable-IT’s 860 Ethernet Extender Kit — the simplest
method to stretch your broadband solutions for in-building deployment in commercial
office buildings, hotels, and multi-tenant residential units.
The 860 Extended Ethernet Unit offers the Lowest Cost Solution in a simple design for
rapid install using existing 1 pair Telco wiring.
This chapter contains introductory information about The 860 Extended Ethernet Unit
and how it can be used in your network. It covers the following topics:
•About the 860 Extended Ethernet Unit
•Key Benefits
•Summary of Features
•Typical Applications
About the 860 Extended Ethernet Kit
The 860 Extended Ethernet Kit solves the problem of high costs associated with
stretching your backbone with traditional fiber or a series of hubs/repeaters.
In many office buildings, preferred network access is a dedicated Ethernet line,
however Ethernet over twisted pair wiring has its distance limitations of just 328 ft. In
order to drive Ethernet signal further, one would have to add repeaters to each
segment of 328ft twisted pair cabling; this is often insufficient and to costly in multi-
story buildings. Fortunately, the Enable-IT 860 Series Extended Ethernet can push
the reach of Ethernet to more than (20) twenty times the typical Ethernet distance
over a 1-pair Telco wiring infrastructure or better.
A simple design methodology would be to think of the 860 extending a standard Ethernet
line up to 6,000 (1,828m) with a (4) Port 10/100 Ethernet switch and can also include
dual voice lines simultaneously.
To increase the durability and extended use of the product providing maximum future
technology protection, 860 Extended Ethernet Unit meets the challenge of modern
switched LANs and allows you to add features and capacity as your network expands.
The Enable-IT 860 Extended Ethernet has been tested to provide full duplex transport
up to 90MB/s over CAT2, and up to 100MB/s over CAT5e cabling.
Up to 700ft (200m) -100Mbps
700ft (200m) to 1,350ft (400m) - 90Mbps
1,350ft (400m) to 1,970ft (600m) - 70Mbps
1,970ft (600m) to 2,625ft (800m) - 52Mbps
2,625ft (800m) to 3,280ft (1000m) - 42Mbps
3,300ft (1005m) to 6,000(1,828m) -30Mbps
* Actual data rate will vary on the quality of the copper wire, twisted pair and environmental factors
Unit Model
Wiring
LAN Data Rate
Max. Distance
860 (1) pair CAT 2 up to CAT5e 100Mbps FD 6,000ft / 1,828m

Page 6 of 14 Ethernet Extension Experts
Key Benefits
The following list identifies the 860 Extended Ethernet Unit key benefits.
•Dramatic cost reduction over any competing technology and includes a (4) Port
10/100 LAN switch on each end.
•Broadband technology that delivers in-building Ethernet access over 1 pair of
existing Category 2 up to Category 5e wiring up to 6,000’, whether spare or
actively in use for analog or digital voice. This means no new wiring is required.
•Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and
virtual private networking.
•Rapid installation with small box profile, no programming and no firmware to
upgrade.
•Low profile box with dual POTS line and Ethernet data all in a single RJ-45
Ethernet jack (Interlink port).Optional RJ-11 dongles provided for telephone use
•Quad switched LAN RJ-45 10/100 Ethernet ports for expansion without adding a
hub or switch on each end.
Summary of Features
The Enable-860 Extended Ethernet Kit has the following hardware features:
•Extended Ethernet line over existing CAT 2 up to CAT5e / CAT6 wiring
•Uses RJ-45 Interlink port for transport (Dual voice, 100Mbps data and PoE)
•Rapid Telco style installation – no programming required
•Supports digital VoD channels and Maintains existing telephone (lifeline POTS)
•Drives Ethernet 100 Mbps full-duplex service delivery with quad LAN switch, dual voice
up to 6,000ft or 1,829m - can also transport PoE up to 1,500ft natively.
•Network Equipment independence – Transparent to protocols/applications/MAC
Specifications: Functionality:
Power Indicator Data Rates 100Mbps Full Duplex
100Mbps Link status/Activity Full Duplex/Half Duplex status/Collisions
VDSL2 Link Status/Activity Protocol independent
Dimensions: 860 Interlink port pins:
Height: 1.5" (38mm) Pins 1 & 2 – Voice line 1 and Data
Depth: 3.75" (95mm) Pins 3 & 6 – Voice line 2(optional)
Width: 5.75” (146mm) Pins 4 & 5 – optional support for PoE
Pins 7 & 8 – optional support for PoE
Environment
Operating temp: -49°F to 168°F (-45°to 76°C) Interfaces
Storage temp: -49°F to 168°F (-45°to 76°C) (1) 5v 2A DC Power Adapter 2.1mm
Humidity 5% to 95%, non-condensing (1) Dual head RJ-11 Dongle
(4) RJ-45 100MB LAN Auto negotiate
Dongle pins:DSL center pair (2&3) = Data
Phone –center pair (2&3) = Voice 1 Outside pair (1&4) = Voice 2

Page 7 of 14 Ethernet Extension Experts
Typical Use Applications
Enable-IT 860 Extended Ethernet Units are usually installed into telephone wiring
infrastructures where extension of backbone services is required and expensive fiber
options are prohibitive. The 860 Extended Ethernet Units allow a standard Ethernet
segment to be deployed quickly over existing 1 pair Telco Copper Wiring in combination
with existing POTS voice signals. The 860 Interlink port (RJ-45 interface) carries this 1-
pair signaling over the RJ-45 pins (1 & 2) - used for transport for both voice and data. If
you use more than 1-pair of wiring such as a CAT5 segment, the RJ-45 pins (3 & 4) are
used for Voice line 2 and the remaining pins 4,5,7 & 8 can transport native 802.3af PoE
or are unused.Quad LAN RJ-45 10/100 autosensing ports allow the use of LAN devices
without adding an Ethernet hub or switch to either end. The Option use RJ-11 Dongles
can be used instead of the RJ-45 Interlink port for ease of use or combined RJ-11
Telephone connections.
Installers have the convenience of a 100Mbps LAN Ethernet unit for peace of mind
connectivity and no device maintenance. Rapid installation allows for minimal
interruption and the Broadband technology allows for investment protection up to 10 -15
years with no firmware or replacement issues. Bandwidth can be scaled according to
the Broadband Access Provider needs. The 860 Extended Ethernet Unit is a passive
device so interruption of Internet service does not affect POTS services. Carriers and
Access Providers can came and go, but the 860 Extended Ethernet Unit technologies
continue to provide lasting value such as the other utilities like Water, gas and electricity.
The Enable-860 Extended Ethernet Unit is suited for the following key environments:
•Commercial Buildings (Multi-Tenant Units)
•Business Parks (Multi-Tenant Units)
•Apartments (Multi-Residential Units)
•Hotels (Multi-Hospitality Units)
•Business Suites (Multi-Hospitality Units)
•School Campuses (University, K-12)
•College Housing (Multi-Residential Units)
•Mining Operations – Quarries, Mine shafts
•Nautical Infrastructure – Cruise ships, Marinas, dive operations, subs
•Video Surveillance/Security
•WiFi Deployment – ISP’s, RV Parks, Construction sites
•Manufacturing – Foundries, pharmaceutical, aerospace, automotive,
petroleum, concrete plants, etc.
•Retail POS – Department stores, Bars, restaurants, retail spaces
•Government – Naval ships, FEMA, Housing, USGS, National Parks, Forestry,
Research stations, NASA, utilities, etc.
•Education – outdoor camps, college campuses
•Healthcare – Hospitals, elder care, outpatient facilities
•Entertainment – Movie theaters, home entertainment, fairs, outdoor venues

Page 8 of 14 Ethernet Extension Experts
INSTALLING THE 860 EXTENDED ETHERNET KIT
The Enable-IT 860 Extended Ethernet Units have a distance restriction of 6,000ft or
1,828m over 1-pair of Category 2 up to Category 5e / CAT6 wiring from device extension
to device extension. Therefore quick, simple site surveys and installation planning are
highly recommended.
This chapter describes the recommended installation process for the Enable-IT 860
Extended Ethernet Unit. It covers the following topics:
•Site Plan – Installation Design Considerations
•Unpacking the Enable-IT 860 Extended Ethernet Kits
•Perform an out of the box Test
•Performing the On-Site Installation
Site Plan - Installation Design Considerations
The planning process should involve a site walkthrough and discovery survey. Electrical
Cable measurement tools are the most reliable method to determine the longest run of
hidden wiring. Estimate the best locations to position the Broadband Concentrators to
adequately reach desired connectivity on each floor. Document your findings to use in
designing a network topology to support the Ethernet Switches and backbone
connectivity. Key points to remember in the Site Survey.
•Total distance limitation of 6,000ft or 1,829m from end to end.
•1 Pair CAT-2 wiring or 4-pair Cat5e .30 Gage or better cabling is required for the
860 Interlink transmission.
For the Interlink wiring you can use either RJ-45 or RJ-11 connectors. Crimp a RJ-
45 Male Head to each end of the contiguous wire run and using the following pins (1
& 2) straight through. This will deliver 1 Voice line, Ethernet Data. If you desire to use
the second voice line, you can also use pins (3 & 6) on each end straight through.
The 860 Interlink port (RJ-45 interface) carries this 1-pair signaling over the RJ-45
pins (1 & 2) - used for transport for both voice and data. If you use more than 1-pair
of wiring such as a CAT5 segment, the RJ-45 pins (3 & 4) are used for Voice line 2
and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused. As an
option the RJ-11 interface on the side of the 860 for use with existing RJ-11 wiring.
The RJ-11 dongles do not transport PoE currently but can be easily added if needed
on request at time of ordering.
Dongle pins:DSL port center pair (2&3) = Data
Phone port –center pair (2&3) = Voice 1 Outside pair (1&4) = Voice 2
860 CPE
860 CO

Page 9 of 14 Ethernet Extension Experts
Unpacking the Enable-IT 860 Extended Ethernet Kit
Carefully remove the Enable-IT 860 Extended Ethernet Kits all packing materials from
the box. Verify that the items listed below are present. Make sure that the equipment
supplied matches what you ordered. If any items are missing or damaged, please
contact Enable-IT or your distributor for assistance.
•(2) The Enable-IT 860 Extended Ethernet Units (CO & CPE)
o5v AC/DC Country Specific Power adapter
o10’ Black Ethernet LAN patch cables
oDual head RJ-11 DSL Filter/Adapter (for use on active phone system)
•(1) Enable-IT 860 Extended Ethernet Kit User Manual (this manual)
Perform an out of the box Test
We highly recommend a quick test to ensure the working order of you 860 units.
To do this, please use one of the Ethernet patch cords provided and attach to the
860 Interlink port of each 860 unit. Power up both 860 units. The Green Sync
LEDs will start flickering slowly and then fast as the units talk to eachother. After
a few seconds you should see a solid Green Interlink Sync LED on each unit to
confirm a link is established. This confirms basic proper operation of the units.
Next for a more detailed test and to confirm your LAN Equipment works with the
860, connect your Ethernet LAN and remote device to the 860 LAN ports and test
connectivity. The Green Interlink Sync LED will pulse rapidly as it detects traffic.

LED indicators will provide visual operational status of the 860 units.
Sync - Slow to fast flicker on power up – indicates negotiation of a link.
Solid Green LED indicates link established and rapid pulse is traffic.
Pwr - Solid Green LED indicates that both units are receiving 5v power.
Mode - Solid Yellow LED on CPE unit only – No LED lit on CO
ACT - Yellow LEDs – Lit solid indicates the presence of local LAN
– Blinking indicates the presence of local LAN traffic
Performing the On-Site Installation
After removing the Enable-IT 860 Extended Ethernet Kit from the box and performing the
out of the box testing all that remains to install the unit on-site is to mount the unit, build
the interconnect wiring, add voice lines if needed and attach the LAN device cabling with
the provided Ethernet Patch cords.
860 CO
860 CPE
RJ-45 Interlink
RJ-11 Interlink
DSL port: center pair
(2&3) = Interlink Data
Phone port:
Center pair (2&3) = Voice line 1
Outside pair (1&4) = Voice line 2

Page 10 of 14 Ethernet Extension Experts
Mounting the Enable-IT 860 Extended Ethernet Units
The Enable-IT 860 Extended Ethernet Kits are designed for quick wall mounting.
Choose a location to mount each of the Enable-IT 860’s where the maximum
distance does not exceed 6,000ft or 1,829m total between devices to be connected.
When wall-mounting the Enable-IT 860 Extended Ethernet Kit it is recommended that
you use the appropriate screw anchors for your mounting surface. If mounting on
existing plywood use wood screws; if mounting onto drywall or sheetrock, use plastic
drywall anchors to secure your installation.
Building the 860 Interlink wiring
The most important aspect of the install is the correct wiring of the Interlink cabling.
You have the option of using RJ-45 or RJ-21 blank male heads for this cabling. The
RJ-11 interlink interface and dongle are provided for your convenience in this choice.
For all wiring you will need to crimp a either a RJ-11 or RJ-45 Male Head to each
end of the contiguous wire run and using the following pins (1 & 2) straight through.
This will deliver 1 Voice line, Ethernet Data. If you desire to use the second voice
line, you can also use pins (3 & 6) on each end straight through. Insert the
completed RJ-45 ends into the 860 Interlink port on each 860 unit or the RJ-11 ends
into the RJ-11 interlink interface and or dongle provided and insert the dongle into
the 860 RJ-11 Interlink port on the right side of each 860 unit.
The 860 Interlink port (RJ-45 interface) carries this 1-pair signaling over the RJ-45
pins (1 & 2) - used for transport for both voice and data. If you use more than 1-pair
of wiring such as a CAT5 segment, the RJ-45 pins (3 & 4) are used for Voice line 2
and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused.
Attaching cabling and devices to the Enable-IT 860 Extended Ethernet Kit.
Attach your remote LAN device to the 860 CPE unit LAN ports with Ethernet patch
cord provided. Attach your local LAN to the 860 CO LAN ports with Ethernet patch
cord provided. Attach the power adapters to both 860 units.
If you plan on using voice service as well, insert your dial tone voice line/lines into the
RJ-11 dongle and then attach to the 860 CO unit – RJ-11 Interlink port and telephone
handset into the RJ-11 dongle and then attach to the 860 CPE unit RJ-11 Interlink
port.Your equipment should now be powered up and functioning.
LED indicators will provide visual operational status of the 860 units.
Sync - Slow to fast flicker on power up – indicates negotiation of a link.
Solid Green LED indicates link established and rapid pulse is traffic.
Pwr - Solid Green LED indicates that both units are receiving 5v power.
Mode - Solid Yellow LED on CPE unit only – No LED lit on CO
ACT - Yellow LEDs – Lit solid indicates the presence of local LAN
– Blinking indicates the presence of local LAN traffic
860 CPE
860 CO