Enable-IT 868 User manual

All Rights Reserved 1997 -2011 ENABLE-IT-Proprietary and Confidential
Ethernet Extension Experts
Enable-IT 868
Single Pair PoE+ & Ethernet Extender
User Manual



Page 2 of 14 Ethernet Extension Experts
Copyright © 1997-2011 Enable-IT, Inc. All rights reserved. No part of this documentation
may be reproduced in any form or by any means or used to make any derivative work (such
as translation, transformation, or adaptation) without written permission from Enable-IT, Inc.
Enable-IT, Inc reserves the right to revise this documentation and to make changes in
content from time to time without obligation on the part of Enable-IT, Inc to provide
notification of such revision or change.
Enable-IT, Inc provides this documentation without warranty, term, or condition of any kind,
either implied or expressed, including, but not limited to, the implied warranties, terms or
conditions of merchantability, satisfactory quality, and fitness for a particular purpose.
Enable-IT, Inc may make improvements or changes in the product(s) and/or the
program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished
under a license agreement included with the product as a separate document, in the hard
copy documentation. If you are unable to locate a copy, please contact Enable-IT, Inc and a
copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software
described herein are provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at
private expense. Software is delivered as "Commercial Computer Software" as defined in
DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101 (a)
and as such is provided with only such rights as are provided in Enable-IT, Inc's standard
commercial license for the Software.
Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov
1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or
deface any portion of any legend provided on any licensed program or documentation
contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, Enable-IT, Inc registered trademarks are registered in the
United States and may or may not be registered in other countries

Page 3 of 14 Ethernet Extension Experts
CONTENTS
ABOUT THIS GUIDE 4
1 INTRODUCING THE ENABLE-IT 868 POE+ &EXTENDED ETHERNET KIT 5
About the 868 PoE+ & Extended Ethernet Kit 5
Key Benefits 6
Summary of Features 6
Multi Use Applications 7
2 INSTALLING THE ENABLE-IT 868 POE+ &EXTENDED ETHERNET KIT 8
Site Plan – Installation Design Considerations 8
Unpacking the 868 Extended Ethernet Kit 9
Perform an out of the box Test 9
Performing the On-Site Installation 10
Mounting the 868 PoE+ & Extended Ethernet Kit 10
Building the 868 Interlink wiring 10
Troubleshooting and Performance settings (Dip switch) 11
3 TECHNICAL SUPPORT
Online Technical Services 12
World Wide Web Site 12
Returning Products for Repair 12
4ENABLE-IT INC.LIMITED WARRANTY 12
5CONTACT US 14

Page 4 of 14 Ethernet Extension Experts
ABOUT THIS GUIDE
This guide provides all the information needed to install and use the Enable-IT
868 PoE+ & Extended Ethernet Kit. This guide is intended for use by technicians
who are responsible for installing and setting up network equipment.
Consequently, it is assumed that the installer has a basic working knowledge of
LANs (Local Area Networks) and voice telecom wiring.
If the information in the release notes that are shipped with your product differs
from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the Enable-IT World Wide
Web site: http://www.ethernetextender.com/manuals/868_Manual.pdf

Page 5 of 14 Ethernet Extension Experts
INTRODUCING THE 868 POE+ &EXTENDED ETHERNET KIT
Congratulations on purchasing the Enable-IT 868 PoE+ & Extended Ethernet Kit — the
simplest method to install your PoE+ IP Security camera or PoE+ Wireless Access Point
using Ethernet or telephone wiring. This is the world’s first solution to deliver Voice,
Ethernet Data and Power over Ethernet (PoE+) in a combined package that exceeds the
IEEE distance limitations for all Ethernet equipment.
WARNING: DO NOT use LAN1/2 PoE+ port on the CPE end for non-PoE+ equipment
as it may damage any non-PoE+ equipment. Use the LAN ports (3-4) on the CPE for
non-PoE+ equipment.
This chapter contains introductory information about how it can be used in your network
and covers the following topics:
•About the 868 PoE+ & Extended Ethernet Kit
•Key Benefits
•Summary of Features
•Typical Use Applications
About the 868 PoE+ & Extended Ethernet Kit
The 868 PoE+ & Extended Ethernet Kit provides a complete all in one solution and lower
cost alternative for installing a PoE+ device beyond IEEE Ethernet cabling distance
limitations or for installing a remote LAN requiring no power at the remote end. Traditional
methods require installation of costly fiber (that can’t carry power) or a series of
hubs/repeaters and the use of voice and PoE+ equipment combined.
The preferred network access for these PoE+ devices is a dedicated Ethernet line,
however Ethernet over twisted pair wiring has its distance limitations of just 328 ft. In
order to drive Ethernet signal further, one would have to add repeaters to each
segment of 328ft twisted pair cabling; this is often insufficient and too costly in multi-
story buildings. Fortunately the Enable-IT 868 Series Extended Ethernet can push
the reach of Ethernet to more than (10.7) ten times the typical Ethernet distance.
2,500ft/762m distance if using the PoE+ power to drive up to a 24v PoE+ device or
3,500ft/1,067m distance if using the PoE+ to remotely power the remote 868 CPE
device using LAN ports 2-4 output for Ethernet data.
The 868 enables the simple installation of a PoE+ device up to 2,500ft (762m) From your
LAN and Power Source. – This is ideal for installing PoE+ IP Security cameras or PoE+
WiFi Access Points or for a standalone remote self powered LAN up to 3,500ft (1,067m).
WARNING: DO NOT use LAN1/2 PoE+ port on the CPE end for non-PoE+ equipment
as it may damage any non-PoE+ equipment. Use the LAN ports (3-4) on the CPE for
non-PoE+ equipment.
The Enable-IT 868 Extended Ethernet has been tested to provide full duplex transport up to
100MB/s over CAT3, CAT5e and higher cabling.
* Actual data rate will vary on the quality of the copper wire, twisted pair and environmental factors
Unit Model
Wiring
Min Data Rate
Max. Distance
868 CAT3, CAT5e or better 100Mbps FD* 3,500ft / 1,067m

Page 6 of 14 Ethernet Extension Experts
Key Benefits
The following list identifies the 868 PoE+ & Extended Ethernet Kit key benefits.
•Quad switched LAN RJ-45 10/100 Ethernet ports on each end for expansion
without adding a hub or switch on each end.
•The Enable-IT 868 PoE+ & Extended Ethernet Kit requires No Power (CPE
remote end), No Firmware, No Maintenance
•Broadband technology that delivers in-building PoE+ and Ethernet access over
existing Category 3 , Category 5e wiring or better up to 3,500ft or 1,067m.
•Provides one scalable infrastructure for Internet access, dual POTS, VoIP, video,
Power over Ethernet (PoE+) and virtual private networking.
•Low profile box Ethernet data and PoE+ all in a single RJ-45 Ethernet jack
(Interlink port).
Summary of Features
The Enable-868 PoE+ & Extended Ethernet Kit has the following hardware features:
•PoE+ and Extended Ethernet line over existing CAT 3 up to CAT5e / CAT6 wiring
•Uses RJ-45 Interlink port for transport (PoE+ and 100Mbps data)
•Rapid Telco style installation – no programming required
•Supports digital VoD
•Drives Ethernet 100 Mbps full-duplex service delivery with PoE+ up to 3,500ft or 1,067m
•Network Equipment independence – Transparent to protocols/applications/MAC
•Cisco PoE+ single line injector support built in.
•Transparent to single line 802.3af PoE+ devices.
Specifications: Functionality:
Power Indicator Data Rates 100Mbps Full Duplex
100Mbps Link status/Activity Full Duplex/Half Duplex status/Collisions
VDSL2 Link Status/Activity Protocol independent
Dimensions: 868 Interlink port pins:
Height: 1.5" (38mm) Pins 1 & 2 –Data PoE+ power
Depth: 3.75" (95mm) Pins 3 & 6 – N/A
Width: 5.75” (146mm) Pins 4 & 5 – N/A
Pins 7 & 8 – N/A
Interfaces Environment
(1) 5v 2A DC Power Adapter 2.1mm Operating temp: -49°F to 168°F (-45°to 76°C)
(1) RJ-45 Not used Storage temp: -49°F to 168°F (-45°to 76°C)
(4) RJ-45 100MB LAN Auto negotiate Humidity 5% to 95%, non-condensing
(1) RJ-45 Interlink Port

Page 7 of 14 Ethernet Extension Experts
Multi Use Applications
Enable-IT 868 PoE+ & Extended Ethernet kit is a versatile multipurpose solution and you
have the choice are only installed for the use of PoE+ equipment such as PoE+ IP
Cameras and PoE+ WiFi Access Points. Non-PoE+ equipment may be damaged if used
and the Enable-IT 868 kit should be used to bridge non-PoE+ equipment.
The 868 PoE+ & Extended Ethernet Kit allows a standard Ethernet segment injected
with 48v PoE+ to be deployed quickly over exiting 1 pair Telco Copper Wiring up to
3,500ft / 1.067m to a remote unpowered location.
Installers have the convenience of a 100Mbps LAN Ethernet unit for peace of mind
connectivity and no device maintenance. Rapid installation allows for minimal
interruption and the Broadband technology allows for investment protection up to 10 -15
years with no firmware or replacement issues. Bandwidth can be scaled according to
the Broadband Access Provider needs. The 868 PoE+ & Extended Ethernet Kit is a
passive device so interruption of Internet service does not affect POTS services.
Carriers and Access Providers can came and go, but the 868 PoE+ & Extended Ethernet
Kit technologies continue to provide lasting value such as the other utilities like water,
gas and electricity.
The Enable-868 PoE+ & Extended Ethernet Kit is suited for the following key environments:
•Commercial Buildings (Multi-Tenant Units)
•Business Parks (Multi-Tenant Units)
•Apartments (Multi-Residential Units)
•Hotels (Multi-Hospitality Units)
•Business Suites (Multi-Hospitality Units)
•School Campuses (University, K-12)
•College Housing (Multi-Residential Units)
•Mining Operations – Quarries, Mine shafts
•Nautical Infrastructure – Cruise ships, Marinas, dive operations, subs
•Video Surveillance/Security
•WiFi Deployment – ISP’s, RV Parks, Construction sites
•Manufacturing – Foundries, pharmaceutical, aerospace, automotive,
petroleum, concrete plants, etc.
•Retail POS – Department stores, Bars, restaurants, retail spaces
•Government – Naval ships, FEMA, Housing, USGS, National Parks, Forestry,
Research stations, NASA, utilities, etc.
•Education – outdoor camps, college campuses
•Healthcare – Hospitals, elder care, outpatient facilities
•Entertainment – Movie theaters, home entertainment, fairs, outdoor venues

Page 8 of 14 Ethernet Extension Experts
INSTALLING THE 868 POE+ &EXTENDED ETHERNET KIT
The Enable-IT 868 PoE+ & Extended Ethernet Kit have a distance restriction of 3,500ft
or 1,067m over 1-pair of Category 3 up to Category 5e / CAT6 wiring from your LAN and
power source to the remote PoE+ device. Therefore quick, simple site surveys and
installation planning are highly recommended – This is ideal for installing PoE+ IP Security
cameras or PoE+ WiFi Access Points.
This chapter describes the recommended installation process for the Enable-IT 868
PoE+ & Extended Ethernet Kit. It covers the following topics:
•Site Plan – Installation Design Considerations
•Unpacking the Enable-IT 868 PoE+ & Extended Ethernet Kit
•Perform an out of the box Test
•Performing the On-Site Installation
Site Plan - Installation Design Considerations
The planning process should involve a site walkthrough and discovery survey. Electrical
Cable measurement tools are the most reliable method to determine the longest run of
hidden wiring. Estimate the best locations to position the Broadband Concentrators to
adequately reach desired connectivity on each floor. Document your findings to use in
designing a network topology to support the Ethernet Switches and backbone
connectivity. Key points to remember in the Site Survey.
•Total distance limitation of 3,500ft / 1.0672m from end to end. -
2,500ft/762m distance if using the PoE+ power for a PoE+ device.
•1-pair Cat5e .30 Gage or better cabling is required for the 868 Interlink
transmission.
•Cisco PoE+ single line injector support built in. Not compatible with any PoE+
switches as the PoE+ switches are not smart enough to understand Extender
Ethernet timing mechanisms and fail to set correct output voltage and will
subsequently disable the PoE+ switch port.
•Transparent to single line 802.3af/802.3at PoE+ injectors and devices.
For CAT3 wiring (1-pair/2 wires) you will need to crimp a RJ-45 Male Head to each
end of the contiguous wire run and using the following pins(1,2) straight through.
This will deliver Ethernet Data and PoE+.
For CAT5e or better wiring (1-pair/2 wires) you will need to crimp a RJ-45 Male Head
to each end of the contiguous wire run and using the following pins(1,2) straight
through. This will deliver Ethernet Data and PoE+.
868 CPE
868 CO

Page 9 of 14 Ethernet Extension Experts
Unpacking the Enable-IT 868 PoE+ & Extended Ethernet Kit
Carefully remove the Enable-IT 868 PoE+ & Extended Ethernet Kit all packing materials
from the box. Verify that the items listed below are present. Make sure that the
equipment supplied matches what you ordered. If any items are missing or damaged,
please contact Enable-IT or your distributor for assistance.
•(2) The Enable-IT 868 PoE+ & Extended Ethernet Units (CO & CPE)
o5v AC/DC Power adapter for 868 CO
o10’ LAN patch cables
oEnable-IT 360 60W -56v High PoE+ Injector
•(1) Enable-IT 868 PoE+ & Extended Ethernet Kit User Manual (this manual)
•(1) Enable-IT 360 PoE+ Injector User Manual
Perform an out of the box Test
We highly recommend a quick test to ensure the working order of you 868 units.
To do this, please use one of the Ethernet patch cords provided and attach to the
868 Interlink port of each 868 unit. Using the 5v power adapter, power up the 868
CO Unit and attach the 360 PoE+ Injector (P+Data Out port) to the 868 CO
LAN1/PoE+ port. After a few seconds you should see a solid Green Interlink Sync
LED on each unit to confirm a link is established. The Green Interlink Sync LED
will pulse rapidly as it detects traffic. This confirms basic proper operation of the
units. Next for a more detailed test and to confirm your PoE+ LAN Equipment
works with the 868, connect your Ethernet LAN and PoE+ remote device to the 868
LAN ports and test connectivity.
WARNING: DO NOT use LAN1/2 PoE+ port on the CPE end for non-PoE+ equipment
as it may damage any non-PoE+ equipment. Use the LAN 3-4 ports on the CPE for
non-PoE+ equipment.
LED indicators will provide visual operational status of the 868 units.
Sync - Slow to fast flicker on power up – indicates negotiation of a link.
Solid Green LED indicates link established and rapid pulse is traffic.
Pwr - Solid Green LED indicates that unit is receiving 5v power.
Mode - Solid Yellow LED on CPE unit only – No LED lit on CO
ACT - Yellow LEDs – Lit solid indicates the presence of local LAN
– Blinking indicates the presence of local LAN traffic
Next for a more detailed test and to confirm your PoE+ Equipment works with the
868, connect your PoE+ device to the 868 CPE LAN1/PoE+ port and your LAN to
the 360 PoE+ Injector Data IN port. For use with a Cisco PoE+ device such as
Aironet WiFi AP – Use the provided Cisco PoE+ patch cord or build one using it as
a guide.

Page 10 of 14 Ethernet Extension Experts
Performing the On-Site Installation
After removing the Enable-IT 868 PoE+ & Extended Ethernet Kit from the box and
performing the out of the box testing all that remains to install the unit on-site is to mount
the unit, build the interconnect wiring, add voice lines if needed and attach the LAN
device cabling with the provided Ethernet Patch cords.
Mounting the Enable-IT 868 PoE+ & Extended Ethernet Units
The Enable-IT 868 PoE+ & Extended Ethernet Kit is designed for quick wall
mounting. Choose a location to mount each of the Enable-IT 868’s where the
maximum distance does not exceed 3,500ft or 1,067m total between devices to be
connected. When mounting the Enable-IT 868 PoE+ & Extended Ethernet Kit it is
recommended that you use the appropriate anchors for your mounting surface. If
mounting on plywood use wood screws; if mounting onto drywall or sheetrock, use
plastic drywall anchors or Velcro can also be used as the units are very lightweight.
Building the 868 Interlink wiring
The most important aspect of the install is the correct wiring of the Interlink cabling.
For CAT3 wiring (1-pair/2 wires) you will need to crimp a RJ-45 Male Head to each
end of the contiguous wire run and using the following pins(1,2) straight through.
This will deliver Ethernet Data and PoE+.
For CAT5e or better wiring (1-pair/2 wires) you will need to crimp a RJ-45 Male Head
to each end of the contiguous wire run and using the following pins(1,2) straight
through. This will deliver Ethernet Data and PoE+.
Attaching cabling and devices to the Enable-IT 868 Extended Ethernet Kit.
Attach your remote PoE+ device to the 868 CPE unit LAN1/PoE+ port with Ethernet
patch cord provided. Attach your local LAN to the 360 PoE+ injector Data IN port.
Attach the power adapter to the 868 CO unit. Attach the 360 PoE+ injector to the 868
CO LAN1/PoE+ port with Ethernet patch cord provided. Absolutely the last step is
to apply power to the 360 PoE+ injector with the country power cord provided.
Your equipment should now be powered up and functioning properly.
The LED indicators will provide visual operational status of the 868 units.
Sync - Slow to fast flicker on power up – indicates negotiation of a link.
Solid Green LED indicates link established and rapid pulse is traffic.
Pwr - Solid Green LED indicates that unit is receiving 5v power.
Mode - Solid Yellow LED on CPE unit only – No LED lit on CO
ACT - Yellow LEDs – Lit solid indicates the presence of local LAN
– Blinking indicates the presence of local LAN traffic
For troubleshooting, first examine the backbone wiring pair and make sure you have solid
connections. The Interlink Sync LED will be lit on each 868 unit to show proper
connection and pairing. If the Interlink Sync LED Link is flashing – (Not pulsing)
1) Make sure your wiring is straight through and not connected to any Telco punch
down blocks or a few as possible – they add interference. If your wiring is
spliced, use Telco butt clips or gel filled caps to bridge wire into a solid
connection. A flashing Interlink Sync LED indicated the units are trying to connect to
eachother and are looking to synchronize frequencies.