ENCLO Bedford EC18003 User manual

ASSEMBLY
INSTRUCTIONS
EC18003 CEDAR COLOR
EC18004 GRAY COLOR
www.encloscreens.com
60 min
Approximate assembly
time for 2 panels
Scan the QR code
for an assembly video
Bedford
Screen Kit
2 PACK
VER. 060321

www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18003 / EC18004
2
jCheck the inside of the larger pieces in your box for other
materials packed inside.
jWhen assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
jWe recommend an area approximately 5’x 8’ for unobstructed
assembling.
jYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and
handling of this product, occasionally problems occur. If you discover
any missing, damaged or defective parts, please visit our website to
order replacement parts. If you experience any further trouble with
your product, please contact our customer service department.
nychgroup.com/parts
suppor[email protected]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-5pm EST.
If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number
EC18003 (CEDAR COLOR) / EC18004 (GRAY COLOR) and the specic
part name which can be found on the next page. It is helpful if you can
provide the batch lot which is a stamped number on the end of the
box.
If you are having problems with the assembly or installation of this
product, we are happy to assist you with the process, so please give
us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please allow
us to help resolve your issues rst. If you still decide to return the
product, you will need to initiate the return from the company you
originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO RETURN?
IMPORTANT

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18003 / EC18004
3
Horizontal Board (10)
⁄" x 2 ¾" x 34 ¼"
Horizontal Picket (24)
¼" x 1 ¼" x 34 ¼"
Joiner Clip (4)
Top Rail (2)
⁄" x ⁄" x 35 ¾"
Bottom Rail (2)
⁄" x ⁄" x 35 ¾" ¾" Steel Screw (20)
Post (4)
⁄" x ⁄" x 42 ⁄"
Middle Post (2)
⁄" x ⁄" x 39"
Post Anchor - Left (2)
¾" x ¾" x 18 ¼"
Post Anchor - Right (2)
¾" x ¾" x 18 ¼"
STEP 1: LAY OUT MATERIALS
A
D E F
B
JIH
C
G

www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18003 / EC18004
4
1. Take (1) Post (C) and arrange it so the routed holes face towards (1)
Middle Post (D).
2. Insert a total of (12) Horizontal Pickets (B) and (5) Horizontal Boards
(A) into the holes in the post and the middle post.
STEP 2: INSERTING THE PICKETS AND BOARDS
bIdentify (1) Top Rail (G) and (1) Bottom Rail (H) as shown
below. Set the rails aside for now.
STEP 2.1
STEP 2.2
Bottom rail identied
by pre-drilled hole
This will be the
bottom of the
screen
Preview
1 2
H
G
Preview
A
D
C
B

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18003 / EC18004
5
STEP 3: INSTALLING THE RAILS
1. Take a post and insert the routed
holes over the boards and pickets.
2. Slide (1) Top Rail (G) over the posts
until the pre-drilled holes align.
3. Drive (2) ¾" screws (I) into the
pre-drilled holes.
STEP 3.1
G
Preview
1
2
Align
I
3

www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18003 / EC18004
6
1. Slide (1) Bottom Rail (H) up over the posts until the pre-
drilled holes align with the top holes of the post bottom as
shown below.
2. Keeping the holes aligned, take (1) Post Anchor - Right (F)
and (1) Post Anchor - Left (E) and slide them until the pre-
drilled holes align with the lowest holes on the posts.
3. Drive (4) ¾" screws into the aligned pre-drilled holes.
STEP 3.2 Preview
1 2
3
HEF
Align Align

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18003 / EC18004
7
1. Move the screen to its nal location and mark where the posts meet the
ground.
2. Attempt to push the screen into the ground.
bRepeat Steps 2-4
to assemble the
second panel.
STEP 4: ASSEMBLING THE SECOND PANEL
STEP 5: INSTALLING PANELS IN THE GROUND
STEP 4.1
STEP 5.1
1 2
Preview
Push down
on posts with
both hands.

www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18003 / EC18004
8
bSTEPS 5.2 and 5.3 are only needed if your ground is
too hard for STEP 5.1.
1. Loosen the top 6" of the ground with a claw
hammer.
2. Add water to loosened soil.
3. Use a block of wood to protect the post and
gently hammer each post into the ground.
1. If your ground is very hard, dig a hole 8" in diameter and 10" deep, large
enough to accommodate one post from each panel.
2. Level the screen, backll excavated dirt, and tamp as needed.
STEP 5.2
STEP 5.3
2
1
3
1 2

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18003 / EC18004
9
STEP 6: CONNECTING THE PANELS
STEP 6.1
1. Straight Line Application: Install the Joiner
Clips (J) as shown below.
2. Corner Application: Install the Joiner Clips
(J) as shown below.
2
1
J
I

www.encloscreens.com
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
ASSEMBLY
INSTRUCTIONS
EC18003 CEDAR COLOR
EC18004 GRAY COLOR
VER. 060321
[e-mail]