ENCLO Highland ZP19047 User manual

www.encloscreens.com
Highland
45 min
Approximate assembly time
Scan the QR code
for an assembly video
ASSEMBLY
INSTRUCTIONS
ZP19047
VER. 082021
Vinyl Privacy Lattice
Screen (2-Pack)
36" W x 57" H

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONSZP19047
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]om
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 8am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19047
on page 4. It is helpful if you can provide the batch lot which is a
stamped number on the end of the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please

return the product, 

GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

www.encloscreens.com
3
ASSEMBLY INSTRUCTIONS ZP19047
Detailed Product Dimensions & Specifications
1 1/2 in
54 1/2 in
16 in
36 in
2 1/4 in
2 1/4 in
57 in

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONSZP19047

 (4)
 Bag B

 (16)
 Bag A
(2)
 (8)
(4 loose, 4 installed)
(28)
¼” x 1¼” x 32½”
(20)

(4)
1½” x 1½” x 36”
(4)
 (4)

STEP 1: LAY OUT MATERIALS
J
K
I
HA
C
E
F
B
D
 (4)
¾” x 1¼” x 20”
(1)
G

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS ZP19047
STEP 2:  THE PICKET GRID

Pickets (C), and arrange
them as shown.
Note: It may take some
light force to insert
horizontal pickets through
the routed holes.
Note: Make sure
the routed holes for

line up.
Insert (14) Horizontal Pickets
(E) through the routed holes in

C
E
STEP 2.1
STEP 2.2

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSZP19047
Note: The end of the post

the top of the screen.
STEP 3: THE POSTS
STEP 4: THE RAILS
Take (2) loose Rail End Caps (G) and

of each of the two Horizontal Rails (F).

Post (D), slowly slide
the horizontal pickets,
one by one, into the
routed holes in the
post. Do the same
for the second post,
ensuring that the tabs
of the posts are at
the same end of the
screen as shown.
D
G
F
STEP 3.1
STEP 4.1

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19047
Ensuring the routed
holes are facing
down, slide the other
horizontal rail over
the top of the posts.



routed holes in the top

holes in the top rail and
posts align. Drive (4)
¾” self-drilling stainless
steel screws into the
pre-drilled holes.
Ensuring the routed holes are
facing up, slide one rail over the




in the rail and posts align.
Note:
align holes.
B
H
1. Slide the Post Anchors (B)
post. 16" of post anchor should be visible.
2. (K) to drill (4) total holes in
the post anchor through the pre-drilled holes in the

3. (H)
into the pre-drilled holes in the horizontal rail.
K
STEP 4.2 STEP 4.3
STEP 4.4

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSZP19047
Repeat Steps 2-4 to
assemble the second
screen.



to push the unit into the ground
as illustrated. All 16” of the post
anchors should be inserted
into the ground, so they are no
longer visible.
Push down
on the top of
the posts with
both hands.
3
STEP 5: INSTALL THE SCREENS
1. If your ground is too hard, loosen
the top 6” or 7” of the ground with a
claw hammer as illustrated.
2. Add water to the loosened soil.
3. Use a block of wood to protect the
top of post, and gently hammer the
post into the ground.
Block of wood
2
1
STEP 5.1
STEP 5.2

www.encloscreens.com
9
ASSEMBLY INSTRUCTIONS ZP19047
1
1
2 3
STEP 5.3
Oponal in hard ground: If your ground is too hard, or you have more than 3 or 4

1. 
($15-$20 on Amazon.com).
2. 
with water as illustrated.
3. Push the panel posts into the holes.

www.encloscreens.com
10
ASSEMBLY INSTRUCTIONSZP19047
Level the screen as

excavated dirt, and
tamp down.
Oponal:
If your ground is very hard, you
may need to dig a single hole large
enough to accommodate one post
from each panel. This hole should be
approximately 8” in diameter and 16”

8” diameter
x 16” deep.
Level
STEP 5.4
STEP 5.5

www.encloscreens.com
11
ASSEMBLY INSTRUCTIONS ZP19047
Fasten the screens
together with (2) Joiner
Clips (J) using (4) 1” Self-
Drilling Stainless Steel
Screws (I).
STEP 6: FASTEN JOINER CLIPS
Boom Rail
J
I
Top Rail
90° applicaon 45° applicaon
STEP 6.1

www.encloscreens.com
12
ASSEMBLY INSTRUCTIONSZP19047
Push the Post Caps
(A) down over the
posts to lock into
place.
STEP 7: INSTALL POST CAPS
A
STEP 7.1

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
ASSEMBLY
INSTRUCTIONS
ZP19047
VER. 082021